Machine Administration Guide 2.6

3.1.6.7 Power Supply Unit Monitoring

This section describes how to operate the Power Supply Unit Monitoring function.

Displaying the Power Supply Unit Monitoring menu

Operation

1. From the Hardware Monitoring Information menu, select [Power Supply Unit Monitoring].

   The Power Supply Unit Monitoring menu opens.

   

Displaying Power Supply Unit Monitoring Information

The following describes how to operate the Displaying Power Supply Unit Monitoring Information function:

Operation

1. From the Power Supply Unit Monitoring menu, select [Displaying and Setting Power Supply Unit Monitoring Information].

   The power supply unit monitoring information appears.

   This information includes:

   • Unit

     The identifier of the power supply unit

     The unit name is displayed in the following formats:

     Power Supply Unit of Basic Cabinet: FEP#n (n is the power supply unit identification number.)

     Power Supply Unit of Expansion Cabinet: cabinet-name#m-PSU#n (m is the cabinet identification number and n is the power supply unit identification number.)

   • Status

     The power supply unit status

     Normal: Normal status

     Error: A power supply unit error was detected. The part needs to be replaced immediately.

     None: Not mounted.

   • Error Notification

     Indicates whether a notification is to be issued to prompt for error reporting if an error is detected.

     Valid: Notification.

     Invalid: No notification.

Setting Power Supply Unit Monitoring Information

The following describes how to perform the Setting Power Supply Unit Monitoring Information operation:

Operation

1. From the Power Supply Unit Monitoring menu, select [Displaying and Setting Power Supply Unit Monitoring Information].

   The power supply unit information list appears.

2. Select the power supply unit whose settings are to be made.
3. Enter the following information in the menu:
   • Setting Valid/Invalid Notification

     Specify whether a notification is to be issued, for each power supply unit. The default is "Valid."

     Valid: Notification.

     Invalid: No notification.

     The above setting can be made for the following types of notifications:

     Error Notification: Used to prompt for the replacement of the power supply unit if an error was detected.

   • Resetting monitoring information

     Reset the monitoring information if the power supply unit was replaced.

Setting Power Supply Unit Monitoring Notification

The following describes how to perform the Setting Power Supply Unit Monitoring Notification operation:

Operation

1. From the Power Supply Unit Monitoring menu, select [Setting Power Supply Unit Monitoring Notification].

   The Setting Power Supply Unit Monitoring Notification menu opens.

2. Enter the following information in the menu:
   • Error Notification Destination

     If error notification is required, specify the destination to which that notification is automatically sent.

     Specify the notification destination from the following:

     • Output to the console
     • Sending mail to the system administrator
     • Sending mail to the CE

   

   Specify the mail address on the Setting Monitoring Notification Information menu of the Hardware Monitoring Information menu.