Enhanced Support Facility 2.6 User's Guide

3.12 nodeled(1M)

NAME

nodeled - LED lamp control/status display command of this system

SYNOPSIS

LED lamp control

/opt/FJSVhwr/sbin/nodeled [-led check] -mode on | blink | off

LED lamp status display

/opt/FJSVhwr/sbin/nodeled [-led check] -status

AVAILABILITY

FJSVpscu

DESCRIPTION

This is a command to display the control and the state of the LED lamp of Main Cabinet.
In this command, the CHECK lamp of the Main Cabinet can be controlled.
To specify the target processor from remoteness at maintenance, the CHECK lamp is lit or can be blinked by this command.
Moreover, status display of the CHECK lamp can be done.

The following models can use this command.

• PRIMEPOWER 250/450

OPTIONS

The following options are available:

-led check

Specify the LED lamp. This parameter can be omitted.

check : CHECK lamp

-mode

Specify ON(lighting), BLINK(blinking), and OFF(release) of the LED lamp. This parameter cannot be specified with "-status" parameter.

ON    : LED lamp is lit
BLINK : LED lamp is blinked
OFF   : Lighting or blinking the LED lamp is released.  This parameter is returned to the previous state to which the LED lamp is lit or blinked by this command.

-status

The state of the LED lamp is displayed. This parameter cannot be specified with "-mode" parameter.

ON    : State of lighting
BLINK : State of blinking
OFF   : State of turning off

EXAMPLES

# /opt/FJSVhwr/sbin/nodeled -led check -mode blink

# /opt/FJSVhwr/sbin/nodeled -led check -status
 === LED ====================
   CHECK(Amber) ------ ON

EXIT STATUS

This command returns the following values:

0

Ended normally

>0

Error