Enhanced Support Facility 2.6 User's Guide

3.13 iompadm(1M)

NAME

iompadm - Multipath control command

SYNOPSIS

/usr/opt/FJSViomp/bin/iompadm [-p] -c class-name subcommand [parameter]

AVAILABILITY

FJSVpscu, FJSVscu2, FJSVscu3, FJSViomp

DESCRIPTION

iompadm displays the status of the communication paths composed of the interfaces.
This command also restores the communication path where a failure occurs.

You can display the status of communication paths or restore them using the combination of the specified subcommand and parameter.

A communication path is a path that the SCF driver uses for communications with a SCF driver: one communication path for each system board.

The following models can use this command.

• GP7000F model 1000/2000
• PRIMEPOWER 250/450/650/800/850/900/1000/1500/2000/2500/HPC2500

OPTIONS

The following options are available:

-c calss-name :

Specifies a class name.

For PRIMEPOWER 250/450

"FJSVscf" must be specified.

For GP7000F model 1000/2000 and PRIMEPOWER 800/1000/2000

"FJSVscf2" must be specified.

For PRIMEPOWER 650/850/900/1500/2500/HPC2500

"FJSVscf3" must be specified.

-p :

Displays a communication path's logical and physical device name. If this option is omitted, only the logical device name will be displayed.

Subcommand :

"Table 3. 1 Subcommand List" lists the subcommands you can specify and gives their descriptions.

[Table 3. 1 Subcommand List]

Subcommand	Description
info	Displays the configuration information of the specified interface or all interfaces, and the status of communication paths.
status	Displays the status of the specified communication path.
ident	Displays the class to which the specified communication path belongs.
probe	Displays the interface to which specified communication path belongs.
recover	Restores the specified communication path.
start	After the recover subcommand is running, this subcommand makes the specified communication path available for communicating.
version	Displays the version information for this product.
help	Displays the usage of the iompadm command.

Parameter :

Specifies a parameter in combination with the subcommands. For more information, see "3.13.1 iompadm subcommand."

EXIT STATUS

This command returns the following values:

0

Ended normally

>0

Error

---

3.13.1 iompadm subcommand