| Enhanced Support Facility 2.6 User's Guide |
|
Contents
Index
|
| Part 1 SCF Driver Features | > Chapter 1 Main Cabinet | > 1.3 Server Setup | > 1.3.2 Feature Settings |
This software can be used to automatically shut down the system when the POWER switch is pressed.
The default setting is to start the system shutdown process after the POWER switch has been pressed twice.
Under the double-press mode, pressing the POWER switch twice will start the shutdown process. This prevents the system from being shutdown by accidentally pressing the POWER switch once. The first time the POWER switch is pressed; you will see a confirmation message on the console. Pressing the POWER switch again within the seconds described to "1.2.2 Shutdown" will start the shutdown process.
Under the single-press mode, pressing the POWER switch will immediately start the shutdown process without displaying the confirmation message.
Under the ignore mode, the system will not shutdown even when the POWER switch is pressed.
When the following models are used, default value is two times, and setting is not necessary.
When the POWER switch is continuously pressed more than the set value, compulsion power supply OFF of the system might be executed.
Please do not press the POWER switch more than the set value continuously.
|
Contents
Index
|