PRIMECLUSTER Web-Based Admin View Operation Guide

4.3 System environment

Target users

Users who belong to the Web-Based Admin View administrator group

• After all of the operation management view are exited, use the environment settings menu.
• The system environment is available only when the environment settings is activated in the primary management server.

Notices on system environment settings

The followings explain setting items and conditions where they are required:

[System environment settings item list]

Item		Default value	Usage
Display setting	Look & Feel	Metal	Use this item to change the Look & Feel displayed on the screen.
Client detailed trace log		No	The trace log should be set up when the specific client information is required for maintenance and troubleshooting.
Inactivity timeout	Inactivity timeout	No	This blocks improper operations by the unauthorized users by locking Web-Based Admin View. This function's validation varies depending on each operation management product.
	Inactivity timeout interval	10 minutes
Primary management server		Default set at installation	To change the IP address of the primary management server.
Secondary management server		Default set at installation	To change the IP address of the secondary management server
Secondary management server automatic migration		No	Execute the "Secondary management server automatic migration" setting.
Client - management server connection time		10 seconds	Specify the time interval of the client to monitor the management server. The client checks the state of the management server periodically at the specified time interval. If it takes time to connect to the client because of a network failure, enter a larger value. Then the disconnection might be avoided.
Automatic connection to management server		No	It indicates whether or not the client be connected automatically to an active management server. The displayed value cannot be modified on the GUI screen. Note that this parameter is invalid in this version.
Management server - monitoring node connection time		10 seconds	It specifies the time interval of the management server surveillance for the monitoring node. The management server monitors requests from a monitoring node at regular intervals. If it takes time to connect to the client because of a network failure, enter a larger value. Then the disconnection might be avoided.
Reconnection interval		30 seconds	It determines the interval of connection requests issued from the monitoring node to the management server.

Log files / Trace log files

To set up these items when specific information is required for maintenance and troubleshooting.

Normally, setup modification is not required.

Item		Default Value
Login log	File size	100KB
	Number of files	2
Operation log	File size	100KB
	Number of files	5
Event log	File size	100KB
	Number of files	2
Management server trace log	File size	200
	Number of files	5
	Detailed trace log	Yes
Monitoring node trace log	File size	200KB
	Number of files	5
	Detailed trace log	Yes

When the system environment settings is modified, the Web-Based Admin View is restarted to make it valid.

---

4.3.1 Display setup

4.3.2 Log & Inactivity timeout

4.3.3 Primary management server

4.3.4 Secondary management server

4.3.5 Client

4.3.6 Monitoring node

4.3.7 Login log

4.3.8 Operation log

4.3.9 Event log

4.3.10 Server trace log

4.3.11 Monitoring node trace log