REMCS Agent Operator's Guide 1.5
Contents Index PreviousNext
UpChapter 2 Use of the Services
Up2.2 Setup for PRIMEPOWER models 800/900/1000/1500/2500/HCP2500

2.2.6 REMCS service for Hot Spare SMC Configuration

When you are using the Hot Spare SMC Configuration, please setup the REMCS service in the following procedures.

  1. Setup the REMCS service for the monitored "host machine" by side of Service SMC.

  2. Setup the REMCS service for Service SMC by side of itself.

  3. Setup the REMCS service for Standby SMC by side of itself.

It is necessary to set the same value to Service SMC and Standby SMC in common item.

Please perform connection check by Standby SMC.

When a setup is changed by the Service SMC, the Standby side should change a setup similarly.

Please refer to the System Console Software User's Guide for Hot Spare SMC Configuration.

Contents Index PreviousNext
All Rights Reserved, Copyright(C) FUJITSU LIMITED, PFU LIMITED 2001-2003