The target response time has been set normally.
Explanation
The target response time has been set successfully.
System Response
The system terminates the command processing.
System Administrator Corrective Action
No action is required.
The target response time cleared normally.
Explanation
The target response time was cleared successfully.
System Response
The system terminates the command processing.
System Administrator Corrective Action
No action is required.
The Automated QoS priority has been set normally.
Explanation
The Automated QoS priority has been set successfully.
System Response
The system terminates the command processing.
System Administrator Corrective Action
No action is required.
The Automated QoS priority cleared normally.
Explanation
The Automated QoS priority was cleared successfully.
System Response
The system terminates the command processing.
System Administrator Corrective Action
No action is required.
Automated QoS Enable/Disable has been set normally.
Explanation
Automated QoS Enable/Disable has been set successfully.
System Response
The system terminates the command processing.
System Administrator Corrective Action
No action is required.
Automated QoS has been activated.
Explanation
Automated QoS has been activated.
System Response
The system terminates the command processing.
System Administrator Corrective Action
No action is required.
Automated QoS has been stopped.
Explanation
Automated QoS has been stopped.
System Response
The system terminates the command processing.
System Administrator Corrective Action
No action is required.
The target response time could not be set.
Explanation
The target response time could not be set.
System Response
The system terminates processing.
System Administrator Corrective Action
Set the target response time again.
The Automated QoS priority could not be set.
Explanation
The Automated QoS priority could not be set.
System Response
The system terminates processing.
System Administrator Corrective Action
Set the Automated QoS priority again.
Automated QoS Enable/Disable could not be set.
Explanation
Automated QoS Enable/Disable could not be set.
System Response
The system terminates processing.
System Administrator Corrective Action
Set the Automated QoS Enable/Disable again.
Automated QoS Tune by Quota Share could not be set.
Explanation
Automated QoS Tune by Quota Share could not be set.
System Response
The system terminates processing.
System Administrator Corrective Action
Reconfigure the Automated QoS Tune by Quota Share.
QoS function of ETERNUS could not be Enable.
Explanation
The QoS function of the ETERNUS Disk storage system could not be set to "Enable".
System Response
The system terminates processing.
System Administrator Corrective Action
Using the commands of the ETERNUS Disk storage system, check whether both the QoS function and the QoS flexible performance feature are enabled. Enable the function that is disabled.
An invalid parameter was specified. There is item that was not able to be set. Item=[itemName]
Explanation
An invalid parameter was specified. There are items that could not be set.
Parameters
itemName : Item that was not able to be set (multiple items might be output)
System Response
The system terminates processing.
System Administrator Corrective Action
After reviewing the parameter, reconfigure the item that is displayed in itemName.
The storage with specified IP address(ipAddress) is not registered.
Explanation
The storage device with the specified IP address is not registered.
Parameters
ipAddress : IP address
System Response
The system terminates processing.
System Administrator Corrective Action
After registering the storage device with the specified IP address, re-execute the command.
The FTV number(number) does not exist.
Explanation
The FTV with the specified volume number does not exist.
Parameters
number : FTV number
System Response
The system terminates processing.
System Administrator Corrective Action
Re-execute the command with the correct FTV number.
Tier Pool of the specified FTV is one layer.
Explanation
The Tier pool where specified FTV exists is one layer.
System Response
The system terminates processing.
System Administrator Corrective Action
Re-execute the command with an FTV in a Tier pool with more than one layer.
Tier Pool of the specified FTV is not Auto Mode.
Explanation
The Execution Mode of the Tiering policy set to the Tier pool where specified FTV exists is not "Auto".
System Response
The system terminates processing.
System Administrator Corrective Action
Re-execute the command with an FTV in a Tier pool where the Execution Mode of the Tiering policy is "Auto".
If 0 (zero) is specified for -resptime option, "on" cannot be specified for -tierctrl option.
Explanation
If 0 is specified for the -resptime option, "on" cannot be specified for the -tierctrl option.
System Response
The system terminates processing.
System Administrator Corrective Action
After checking the specified options, re-execute the command.
If "noset" or "unlimited" is specified for -priority option, "on" cannot be specified for -tierctrl option.
Explanation
If "noset" or "unlimited" is specified for the -priority option, "on" cannot be specified for the -tierctrl option.
System Response
The system terminates processing.
System Administrator Corrective Action
After checking the specified options, re-execute the command.
If "enable" is specified for -qosfunc option, specify -priority or -resptime option.
Explanation
If "enable" is specified for the -qosfunc option, specify the -priority or -resptime option at the same time.
System Response
The system terminates processing.
System Administrator Corrective Action
After checking the specified options, re-execute the command.
If "disable" is specified for -qosfunc option, the option (optionName) cannot be specified.
Explanation
If "disable" is specified for the -qosfunc option, options that are displayed in optionName cannot be specified at the same time.
Parameters
optionName : Options that cannot be specified at the same time
System Response
The system terminates processing.
System Administrator Corrective Action
After checking the specified options, re-execute the command.
If 0 (zero) is specified for -resptime option, "on" cannot be specified for -quotatune option.
Explanation
If "0" is specified for the -resptime option, "on" cannot be specified for the -quotatune option.
System Response
The system terminates processing.
System Administrator Corrective Action
After checking the specified options, re-execute the command.
If "noset" or "unlimited" is specified for -priority option, "on" cannot be specified for -quotatune option.
Explanation
If "noset" or "unlimited" is specified for the -priority option, "on" cannot be specified for the -quotatune option.
System Response
The system terminates processing.
System Administrator Corrective Action
After checking the specified options, re-execute the command.
When configuring Automated QoS or Automated QoS Option, register the ETERNUS SF Storage Cruiser Quality of Service Management Option license.
Explanation
When configuring the Automated QoS function or when setting the Automated Quality of Service Option, register the ETERNUS SF Storage Cruiser Quality of Service Management Option license.
System Response
The system terminates processing.
System Administrator Corrective Action
Register the license "ETERNUS SF Storage Cruiser V16 Quality of Service Management Option" by using the license management function.
If you still have a problem, refer to "Collecting Troubleshooting Information" in the Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
Internal error occurred. Detail=[detailCode]
Explanation
An internal error occurred.
Parameters
detailCode : Detailed code
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "Collecting Troubleshooting Information" in the Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
A Database error occurred.
Explanation
An error has occurred in the database access processing.
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "Collecting Troubleshooting Information" in the Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
Automated QoS Function was terminated.
Explanation
Automated Quality of Service function has been terminated because a system error occurred.
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "Collecting Troubleshooting Information" in the Storage Cruiser Operation Guide for Optimization Function to collect the information required for troubleshooting and contact Fujitsu Technical Support.
