The command ended normally.
Explanation
The command is completed successfully.
System Response
The command completes processing.
System Administrator Corrective Action
No action is required.
An unexpected error occurred during processing.
Explanation
An unexpected error occurred during processing.
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "Collecting Troubleshooting Information" in the Operation Guide (Express Operation Guide or Storage Cruiser Operation Guide) of the product in use to collect the information required for troubleshooting and contact Fujitsu Technical Support.
An error occurred during processing. detail=detail
Explanation
An error occurred during the command processing.
Parameters
detail : Detail message
System Response
The system terminates processing.
System Administrator Corrective Action
After taking appropriate action for the error that is displayed in detail, re-execute the operation.
There is an error in command syntax.
Explanation
A command syntax error has occurred.
System Response
The system terminates processing.
System Administrator Corrective Action
After checking the command syntax, re-execute the operation.
The license required to run this command is not registered.
Explanation
The license required to execute this command is not registered.
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to the manual related to this command to register a required license.
ETERNUS SF Manager is not started or is during start-up, and the executed command is not available.
Explanation
Because ETERNUS SF Manager is not started or is during start-up, the executed command cannot be used.
System Response
The system terminates processing.
System Administrator Corrective Action
After checking that the esccs10000 message to show that service is running is output to the system log (event log), re-execute the command.
If you still have a problem, collect the information required for troubleshooting and contact Fujitsu Technical Support.
The command was successfully executed, but the command execution output failed to be displayed.
Explanation
The command was successfully executed, but the execution result failed to be displayed.
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to the Operation History on Web Console to check the command execution result. In addition, collect the information required for troubleshooting and contact Fujitsu Technical Support.
The command was canceled.
Explanation
The command was cancelled.
System Response
The command terminates processing.
System Administrator Corrective Action
No action is required.
The command is not run by operating system administrator privileges.
Explanation
The command is not executed by operating system administrator privileges.
System Response
The system terminates processing.
System Administrator Corrective Action
Execute the command with the operating system administrator privileges.
Failed to write the VVOL metadata. Storage=storageName, Code=errCode
Explanation
To write the VVOL metadata to the storage device failed.
Parameters
storageName : Storage device name
errCode : Internal error code
System Response
The system terminates processing.
System Administrator Corrective Action
After removing the cause of the error that is displayed in errCode, re-execute the operation.
If you still have a problem, collect the information required for troubleshooting and contact Fujitsu Technical Support.
Failed to read the VVOL metadata. Storage=storageName, Code=errCode
Explanation
To read the VVOL metadata from the storage device failed.
Parameters
storageName : Storage device name
errCode : Internal error code
System Response
The system terminates processing.
System Administrator Corrective Action
After removing the cause of the error that is displayed in errCode, re-execute the operation.
If you still have a problem, collect the information required for troubleshooting and contact Fujitsu Technical Support.
Failed to read the datastore configuration information. Storage=storageName, Code=errCode
Explanation
To read the datastore configuration information from the storage device failed.
Parameters
storageName : Storage device name
errCode : Internal error code
System Response
The system terminates processing.
System Administrator Corrective Action
After removing the cause of the error that is displayed in errCode, re-execute the operation.
If you still have a problem, collect the information required for troubleshooting and contact Fujitsu Technical Support.
The storage with specified IP address(ipAddress) is not registered.
Explanation
The storage device of the specified IP address is not registered in the ETERNUS SF system.
Parameters
ipAddress : IP address of storage device
System Response
The system terminates processing.
System Administrator Corrective Action
Specify the IP address of a storage device that is registered in the ETERNUS SF system, and re-execute the command.
The storage with IP address(ipAddress) has been locked.
Explanation
The storage device that is displayed in ipAddress has been locked by another operation.
Parameters
ipAddress : IP address of storage device
System Response
The system terminates processing.
System Administrator Corrective Action
If ETERNUS Web GUI is open, after logging out, re-execute the command.
If the settings of the storage device are in the process of being changed by using Storage Cruiser (such as access path configurations, or access paths being inherited), execute the command again after the operation has completed.
The specified copy group is not for NAS backup. The copy group name=copyGroup
Explanation
The specified copy group is not for NAS backup. Or, the NAS backup setting is not performed.
Parameters
copyGroup : Copy group name
System Response
The system terminates processing.
System Administrator Corrective Action
For the copy group for NAS volume, specify the copy group name of NAS backup setting. Its copy group name can be confirmed with Web Console.
Cannot backup NAS volume because NAS backup volume is mounted.
Explanation
Because the NAS backup volume is mounted, the NAS volume cannot be backed up.
System Response
The system terminates processing.
System Administrator Corrective Action
After unmounting the NAS backup volume, re-execute the command.
Cannot restore NAS volume because NAS backup volume is mounted.
Explanation
Because the NAS backup volume is mounted, the NAS volume cannot be restored.
System Response
The system terminates processing.
System Administrator Corrective Action
After unmounting the NAS backup volume, re-execute the command.
Cannot restore NAS volume because NAS volume is not backed up.
Explanation
Because the NAS volume is not backed up, the NAS volume cannot be restored.
System Response
The system terminates processing.
System Administrator Corrective Action
After backing up the NAS volume, re-execute the command.
The virtual machine of specified VMID is not found. The VMID=vmid
Explanation
The virtual machine of specified VMID is not found.
Parameters
vmid : Specified VMID
System Response
The system terminates processing.
System Administrator Corrective Action
Check whether the virtual machine of the specified VMID exists. If it does not exist, review the operation target.
The VMID can be confirmed with the "esfadm vvolvm info" command. Refer to "Command References" in the Storage Cruiser / AdvancedCopy Manager Operation Guide for VMware vSphere Virtual Volumes for information on the command.
The virtual machines can be confirmed with the VVOL Backup Management screen of Web Console.
The virtual machine which backup mode "Disable" has been set is specified by VMID. The VMID=vmid
Explanation
"Disable" is set in [Operation Mode] in the virtual machine backup policy of the virtual machine for the specified VMID.
Parameters
vmid : Specified VMID
System Response
The system terminates processing.
System Administrator Corrective Action
Check [Operation Mode] in the virtual machine backup policy of the virtual machine for the specified VMID. The [Operation Mode] can be confirmed with the VVOL Backup Management screen of Web Console.
If the virtual machine backup policy is set as follows, "Disable" is set in [Operation Mode]:
The number "0" is specified for [Number of Snapshot Generations], and
"Disable" is specified for [Clone Backup].
When performing a virtual machine backup, after changing the policy with vCenter Server, re-execute the command.
Refer to "Change of Policy" in the Storage Cruiser / AdvancedCopy Manager Operation Guide for VMware vSphere Virtual Volumes for information on how to change the policy.
The virtual machine is not registered to Management Server.
Explanation
The virtual machine is not registered in the Management Server.
System Response
The system terminates processing.
System Administrator Corrective Action
Perform the following actions:
If the VM host is not displayed on the Server screen of Web Console
Refer to "Configuration and Registration of Managed Devices" in the Storage Cruiser / AdvancedCopy Manager Operation Guide for VMware vSphere Virtual Volumes to register the VM host.
If the virtual machine is not displayed on the VVOL Backup Management screen of Web Console
For the VM host, perform the Reload Conf. operation with Web Console.
Operation is accepted.
Explanation
Operation is accepted.
System Response
The system starts processing.
Operator Corrective Action
No action is required.
System Administrator Corrective Action
No action is required.
Operation has already been accepted.
Explanation
Operation cannot be accepted because its operation has already been accepted.
System Response
The system terminates processing.
Operator Corrective Action
After confirming that "Complete" is displayed in IMPORT STATUS column in the "esfadm devconf importstatus" command, re-execute the command.
If this error repeats though the IMPORT STATUS column is "Complete", contact the system administrator.
System Administrator Corrective Action
Collect the information required for troubleshooting by the "esfsnap" command and contact Fujitsu Technical Support.
Operation is not accepted.
Explanation
Operation cannot be accepted because the error is detected during requesting the operation.
System Response
The system terminates processing.
Operator Corrective Action
Execute the operation again.
If this error repeats, contact the system administrator.
System Administrator Corrective Action
Check whether the following problems occur at the file system in which the ETERNUS SF product is installed.
Insufficient free space
Hardware error
If you still have a problem, collect the information required for troubleshooting by the "esfsnap" command and contact Fujitsu Technical Support.
Because the command to import configuration information is not executed, its import status cannot be displayed.
Explanation
The configuration import status cannot be displayed because the request to import configuration information is not accepted.
System Response
The system terminates processing.
Operator Corrective Action
After executing the "esfadm devconf import" command, re-execute the operation.
If this error repeats after executing the "esfadm devconf import" command, contact the system administrator.
System Administrator Corrective Action
If you still have a problem, collect the information required for troubleshooting by the "esfsnap" command and contact Fujitsu Technical Support.