Registration of a hardware provider went wrong.
Explanation
The hardware provider registration failed.
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "Collecting Troubleshooting Information" in the AdvancedCopy Manager Operation Guide to collect the information required for troubleshooting and contact Fujitsu Technical Support.
An hardware provider is registered.
Explanation
The hardware provider has already been registered.
System Response
The system terminates processing.
System Administrator Corrective Action
No action is required.
Deletion of an hardware provider went wrong.
Explanation
The hardware provider deletion failed.
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "Collecting Troubleshooting Information" in the AdvancedCopy Manager Operation Guide to collect the information required for troubleshooting and contact Fujitsu Technical Support.
An hardware provider is deletion ending.
Explanation
The hardware provider has already been registered.
System Response
The system terminates processing.
System Administrator Corrective Action
No action is required.
Internal inconsistency occurred. Server=serverName
Explanation
An internal inconsistency occurred.
Parameters
serverName : Server name
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "Collecting Troubleshooting Information" in the AdvancedCopy Manager Operation Guide to collect the information required for troubleshooting and contact Fujitsu Technical Support.
Cannot acquire server information.
Explanation
The server information could not be obtained.
System Response
The system terminates processing.
System Administrator Corrective Action
If the server is a clustered system, check whether the server is an active node.
Information acquisition went wrong from the repository. Error code=errCode
Explanation
Information could not be obtained from the repository.
Parameters
errCode : Error code
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "B.2 Error Codes for Configuration Management", take action according to the instructions for the error code, and re-execute processing.
The server is not registered. Server=serverName
Explanation
The server is not registered.
Parameters
serverName : Server name
System Response
The system terminates processing.
System Administrator Corrective Action
Check the server registration status.
The device is not registered. Device=deviceName
Explanation
The device is not registered.
Parameters
deviceName : Device name
System Response
The system terminates processing.
System Administrator Corrective Action
Check the device registration status.
A device is registered as copy set information. Device=deviceName, server=serverName
Explanation
The device is already registered as copyset information.
Parameters
deviceName : Device name
serverName : Server name
System Response
The system terminates processing.
System Administrator Corrective Action
Use the reference option of the copyset registration, deletion, or reference command to check the device registration status.
Cannot acquire device information. Server=serverName, error=error
Explanation
Device information could not be obtained.
Parameters
serverName : Server name
error : Detailed error message of ETERNUS Disk storage system
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "A.4 Detail Error Messages of ETERNUS Disk Storage System", take action according to the instructions for the error code, and re-execute processing.
The error occurred in processing between servers. Error code=errCode, detailed code=detail
Explanation
An error occurred during processing between servers.
Parameters
errCode : Error code
detail : Detailed code
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "B.1 Error Codes for Communication Service/Daemon", take action according to the instructions for the error code, and re-execute processing. "Request send destination server" is the copy target server.
Access of copy set information went wrong. Server=serverName
Explanation
Access to the copyset information failed.
Parameters
serverName : Server name
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "Collecting Troubleshooting Information" in the AdvancedCopy Manager Operation Guide to collect the information required for troubleshooting and contact Fujitsu Technical Support.
Fault is in the size of a device. Copied material device=srcSize, copy place device=dstSize
Explanation
The device size is invalid.
Parameters
srcSize : Source device size (blocks) for copying
dstSize : Destination device size (blocks) for copying
System Response
The system terminates processing.
System Administrator Corrective Action
Check the device size.
The device is not registered as copy set information. Device=deviceName
Explanation
The device is not registered as copyset information.
Parameters
deviceName : Device name
System Response
The system terminates processing.
System Administrator Corrective Action
Check the device registration status.
The server of cluster employment cannot be made into a copy place server.
Explanation
A server in a clustered system cannot be specified as a copy target server.
System Response
The system terminates processing.
System Administrator Corrective Action
Confirm the copy target server.
The same server was specified at the copy place the copied material. Or the same LUN was specified at the copy place the copied material.
Explanation
The same server was specified as the copy source and target server, or the same LUN was specified as the copy source and target LUN.
System Response
The system terminates processing.
System Administrator Corrective Action
Check the server and LUN.
The group name format is different.
Explanation
The group name format is different.
System Response
The system terminates processing.
System Administrator Corrective Action
Check the group name.
The copy type differs from the copy set information that has been registered.
Explanation
The copy type does not match the copy set information that has already been registered.
System Response
The system terminates processing.
System Administrator Corrective Action
Check the copy type.
The group name has already been registered.
Explanation
The group name has already been registered.
System Response
The system terminates processing.
System Administrator Corrective Action
Check the group name.
Specify the target device.
Explanation
Specify the target device.
System Response
The system terminates processing.
System Administrator Corrective Action
Execute the command with copy destination information specified.
The session exists.
Explanation
The session already exists.
System Response
The system terminates processing.
System Administrator Corrective Action
Delete the session, and execute copy set deletion processing.
It failed in the acquisition of the disk type.
Explanation
The disk type fetching process failed.
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "Collecting Troubleshooting Information" in the AdvancedCopy Manager Operation Guide to collect the information required for troubleshooting and contact Fujitsu Technical Support.
The copy origin and the disk type at the copy destination are different. Copy origin = srcDiskType, Copy destination = dstDiskType
Explanation
The copy source and copy destination are different disk types.
Parameters
srcDiskType : Source disk type for copying
dstDiskType : Destination disk type for copying
System Response
The system terminates processing.
System Administrator Corrective Action
Check the copy source disk and copy destination disk types and make then the same type.
Internal inconsistency occurred.
Explanation
An internal inconsistency occurred.
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "Collecting Troubleshooting Information" in the AdvancedCopy Manager Operation Guide to collect the information required for troubleshooting and contact Fujitsu Technical Support.
Acquisition of device information went wrong. Error=error
Explanation
The device information could not be obtained.
Parameters
error : Detailed error message of ETERNUS Disk storage system
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "A.4 Detail Error Messages of ETERNUS Disk Storage System", take action according to the instructions for the error code, and re-execute processing.
Access of copy set information went wrong.
Explanation
Access to copyset information failed.
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "Collecting Troubleshooting Information" in the AdvancedCopy Manager Operation Guide to collect the information required for troubleshooting and contact Fujitsu Technical Support.
Acquisition of server information went wrong.
Explanation
The server information could not be obtained.
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "Collecting Troubleshooting Information" in the AdvancedCopy Manager Operation Guide to collect the information required for troubleshooting and contact Fujitsu Technical Support.
Copy set information is not registered.
Explanation
The copyset information is not registered.
System Response
The system terminates processing.
System Administrator Corrective Action
Check the registration status of the target device.
An attempt to obtain physical disk information failed.
Explanation
An attempt to obtain physical disk information failed.
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "Collecting Troubleshooting Information" in the AdvancedCopy Manager Operation Guide to collect the information required for troubleshooting and contact Fujitsu Technical Support.
The server has not been registered. Server = serverName.
Explanation
The server has not been registered.
Parameters
serverName : Server name
System Response
The system terminates processing.
System Administrator Corrective Action
Check the registration status of the server.
There is not enough memory.
Explanation
There is not enough memory.
System Response
The system terminates processing.
System Administrator Corrective Action
Terminate all other applications, and then re-execute.
Internal inconsistency occurred.
Explanation
An internal inconsistency occurred.
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "Collecting Troubleshooting Information" in the AdvancedCopy Manager Operation Guide to collect the information required for troubleshooting and contact Fujitsu Technical Support.
Insufficient memory occurred.
Explanation
A memory shortage occurred.
System Response
The system terminates processing.
System Administrator Corrective Action
Terminate all other applications and then re-execute.
Acquisition of device information went wrong. Error=error
Explanation
The device information could not be obtained.
Parameters
error : Detailed error message of ETERNUS Disk storage system
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "A.4 Detail Error Messages of ETERNUS Disk Storage System", take action according to the instructions for the error code, and re-execute processing.
Access of a device went wrong. Error code=errCode
Explanation
Device access failed.
Parameters
errCode : Error code
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "Collecting Troubleshooting Information" in the AdvancedCopy Manager Operation Guide to collect the information required for troubleshooting and contact Fujitsu Technical Support.
It is copy set a non-registered device. Signature=signature, disk=diskNumber
Explanation
The device is not registered for copy set.
Parameters
signature : Disk signature
diskNumber : Physical disk number
System Response
The system terminates processing.
System Administrator Corrective Action
Check the device registration status.
Access of copy set information went wrong.
Explanation
Access to copyset information failed.
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "Collecting Troubleshooting Information" in the AdvancedCopy Manager Operation Guide to collect the information required for troubleshooting and contact Fujitsu Technical Support.
OPC cannot be performed. Error=error
Explanation
OPC cannot be executed.
Parameters
error : Detailed error message of ETERNUS Disk storage system
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "A.4 Detail Error Messages of ETERNUS Disk Storage System", take action according to the instructions for the error code, and re-execute processing.
If 24 (hardware error requiring CE-CALL) is output as ERROR parameter, Advanced Copy was probably not set correctly. Check the ETERNUS Disk storage system setting.
It is execution from other than ACM requestor.
Explanation
The execution must be performed from the AdvancedCopy Manager requester.
System Response
The system terminates processing.
System Administrator Corrective Action
Check whether the AdvancedCopy Manager requester is executed.
The session status is invalid.
Explanation
The session status is invalid.
System Response
The system terminates processing.
System Administrator Corrective Action
Check the copy status.
The suspend of EC cannot be performed. Error=error
Explanation
The EC suspend cannot be performed.
Parameters
error : Detailed error message of ETERNUS Disk storage system
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "A.4 Detail Error Messages of ETERNUS Disk Storage System", take action according to the instructions for the error code, and re-execute processing.
If 24 (hardware error requiring CE-CALL) is output as ERROR parameter, Advanced Copy was probably not set correctly. Check the ETERNUS Disk storage system setting.
An attempt to obtain session information failed. Error=error
Explanation
An attempt to obtain session information failed.
Parameters
error : Detailed error message of ETERNUS Disk storage system
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "A.4 Detail Error Messages of ETERNUS Disk Storage System", take action according to the instructions for the error code, and re-execute processing.
If 24 (hardware error requiring CE-CALL) is output as ERROR parameter, Advanced Copy was probably not set correctly. Check the ETERNUS Disk storage system setting.
QuickOPC cannot be executed. Error=error
Explanation
The QuickOPC cannot be executed.
Parameters
error : Detailed error message of ETERNUS Disk storage system
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "A.4 Detail Error Messages of ETERNUS Disk Storage System", take action according to the instructions for the error code, and re-execute processing.
If 24 (hardware error requiring CE-CALL) is output as ERROR parameter, Advanced Copy was probably not set correctly. Check the ETERNUS Disk storage system setting.
It is copy set a non-registered device. DiskID = diskID, disk = diskNumber
Explanation
The device is not registered as copy set information.
Parameters
diskID : Disk ID
diskNumber : Physical disk number
System Response
The system terminates processing.
System Administrator Corrective Action
Check the registration status of the device.
An internal conflict has occurred.
Explanation
An internal conflict has occurred.
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "Collecting Troubleshooting Information" in the AdvancedCopy Manager Operation Guide to collect the information required for troubleshooting and contact Fujitsu Technical Support.
There is not enough memory.
Explanation
There is not enough memory.
System Response
The system terminates processing.
System Administrator Corrective Action
Terminate all other applications, and then re-execute.
The device has not been registered for EC use in the copy set information.
Explanation
The device has not been registered for EC use in the copy set information.
System Response
The system terminates processing.
System Administrator Corrective Action
Check the content registered for the copy set.
An attempt to obtain device information failed.
Explanation
An attempt to obtain device information failed.
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "Collecting Troubleshooting Information" in the AdvancedCopy Manager Operation Guide to collect the information required for troubleshooting and contact Fujitsu Technical Support.
An attempt to obtain server information failed.
Explanation
An attempt to obtain server information failed.
System Response
The system terminates processing.
System Administrator Corrective Action
If the server is a clustered system, check whether the server is an active node.
Access to copy set information failed. Server = serverName
Explanation
Access to copy set information failed.
Parameters
serverName : Server name
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "Collecting Troubleshooting Information" in the AdvancedCopy Manager Operation Guide to collect the information required for troubleshooting and contact Fujitsu Technical Support.
The device is not registered as copy set information. Device=deviceName, Server = serverName
Explanation
The device is not registered as copy set information.
Parameters
deviceName : Device name
serverName : Server name
System Response
The system terminates processing.
System Administrator Corrective Action
Check the registration status of the device.
The server has not been registered. Server = serverName.
Explanation
The server has not been registered.
Parameters
serverName : Server name
System Response
The system terminates processing.
System Administrator Corrective Action
Check the registration status of the server.
An attempt to obtain physical disk information failed.
Explanation
An attempt to obtain physical disk information failed.
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "Collecting Troubleshooting Information" in the AdvancedCopy Manager Operation Guide to collect the information required for troubleshooting and contact Fujitsu Technical Support.
Operation failed. Error=error
Explanation
An OPC, EC or QuickOPC operation failed.
Parameters
error : Detailed error message of ETERNUS Disk storage system
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "A.4 Detail Error Messages of ETERNUS Disk Storage System", take action according to the instructions for the error code, and re-execute processing.
If 24 (hardware error requiring CE-CALL) is output as ERROR parameter, Advanced Copy was probably not set correctly. Check the ETERNUS Disk storage system setting.
Copy has not started.
Explanation
An OPC, EC or QuickOPC has not started.
System Response
The system terminates processing.
System Administrator Corrective Action
Check the copy status.
The operation cannot be performed with the current copy status.
Explanation
The operation cannot be performed with the current copy status.
System Response
The system terminates processing.
System Administrator Corrective Action
Check the copy status.
If necessary, forcibly stop or pause the operation.
For OPC and QuickOPC, only stop operations are possible.
Explanation
For OPC and QuickOPC, only stop operations are possible.
System Response
The system terminates processing.
System Administrator Corrective Action
Check the parameters.
It failed in the change in prov_copyset.ini.Execution server = serverName
Explanation
The copy set change failed.
Parameters
serverName : Execution server name
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "Collecting Troubleshooting Information" in the AdvancedCopy Manager Operation Guide to collect the information required for troubleshooting and contact Fujitsu Technical Support.
The server for the change doesn't exist. Object server = serverName
Explanation
The server name specified to be changed does not exist.
Parameters
serverName : Target server name
System Response
The system terminates processing.
System Administrator Corrective Action
Check the name of the server to be changed.
Cannot aquire server information.
Explanation
The server information fetching process failed.
System Response
The system terminates processing.
System Administrator Corrective Action
If the server is a clustered system, check whether the server is an active node.
The server is not registered. Server = serverName
Explanation
The server is not registered.
Parameters
serverName : Server name
System Response
The system terminates processing.
System Administrator Corrective Action
Check the registration status of the server.
Information acquisition went wrong from the repository. Error code = errCode
Explanation
The process to fetch information from the repository failed.
Parameters
errCode : Error code
System Response
The system terminates processing.
System Administrator Corrective Action
Refer to "B.2 Error Codes for Configuration Management", take action according to the instructions for the error code, and re-execute processing.
