The procedure to reload the FC switch configuration information is as follows:
On the global navigation tab, click Network.
The registered FC switch list is displayed on the Main pane.
On the Main pane, check the target FC switch checkbox.
On the Action pane, click Reload Conf. under Switch.
Point
In registering FC switches, if the Principal switch has not been registered beforehand or unknown, on completion of registration of all the FC switches making up the fabric, perform this operation on all the FC switches making up the fabric.
If the FC switch configuration has been changed in such cases as below, perform this operation on all the FC switches making up the fabric:
The Principal switch was changed due to FC switch replacement.
The fabric configuration was changed due to cascade connection/disconnection between FC switches.
Switches were added to or deleted from the fabric.
The Principal switch was intentionally changed.
The device name of the FC switch was changed.
