ETERNUS SF Express V16.9 / Storage Cruiser V16.9 / AdvancedCopy Manager V16.9 Web Console Guide

9.1.3 Delete ETERNUS Disk Storage System

The procedure to delete the registered ETERNUS Disk storage system is as follows:

1. On the global navigation tab, click Storage.
   The registered ETERNUS Disk storage systems are displayed on the Main pane.

2. On the Main pane, check the target ETERNUS Disk storage system checkbox.

3. On the Action pane, click Delete under Storage.
   The information confirmation screen is displayed.

4. When releasing the Host Affinity setting related to the ETERNUS Disk storage system, check the Remove Access Path checkbox. In case of uncheck this checkbox, delete the access path manually.

5. Click Delete.

Point

• When the Remove Access Path checkbox is checked at step 4, zoning information is deleted from the switch on access path. After deleting the ETERNUS Disk storage system, perform Reload Conf. for the switch on access path. The zoning information configured to the switch is updated.

• If the ETERNUS Disk storage system is removed from this product, the event notification settings for SNMP Traps that were changed when the device was registered return to the settings prior to the device registration. Refer to [Point] in "Monitoring Device Component Status" in the Storage Cruiser Operation Guide for details.

• If the above procedure is performed when AdvancedCopy Manager CCM is operating in the Management Server, the ETERNUS Disk storage system with the same ETERNUS name is also deleted from AdvancedCopy Manager CCM. To continue using the deleted ETERNUS Disk storage system with AdvancedCopy Manager CCM, register it in AdvancedCopy Manager CCM again.