The ETERNUS AF250 S2 can be used from version 16.6.
Refer to the Event Guide for information on the event traps notified from the device.
The following operations can be performed for the Non-disruptive Storage Migration functions that are added to the ETERNUS DX60 S4/DX100 S4/DX200 S4, DX60 S3/DX100 S3/DX200 S3, the ETERNUS AF250 S2/AF250, and the ETERNUS DX200F.
Displaying information of the volumes that are used for the Non-disruptive Storage Migration
Displaying performance information of the volumes that are used for the Non-disruptive Migration
Displaying performance information of the FC-Initiator port
Note
In this product, the External Drive or the External RAID Group that is used for the Non-disruptive Storage Migration cannot be displayed.
Express can manage the ETERNUS DX100 S4/DX200 S4 and the ETERNUS AF250 S2 that have the following component:
FC-CA board that responds to a 32 Gbps port transfer speed
Express can manage the ETERNUS DX60 S4 that has the following component:
SAS-CA board that responds to a 12 Gbps port transfer speed
Point
To perform the operations or use the functions described in this section, the firmware version of the target storage device must be V10L80 or later.
