The following are the incompatible commands of Redundant Line Control function from the previous version.
[Contents]
'The default value of the -h option is changed from NO to YES. For details, see "7.6 hanetparam Command."
[Changes]
Before modification
The default value of the -h option is set to NO (changed based on the OS setting).
After modification
The default value of the -h option is set to YES (only the /etc/hosts file is used to change the host name).
(2) hanetconfig command/hanetpoll command/hanetobserv command
[Contents]
A numeric string cannot be specified as a host name.
[Changes]
Before modification
A numeric string can be specified as a host name.
When specified a numeric string for a host name, it is dealt with as decimal and converted into an IP address corresponding to its value to work.
(For instance, when specified "123456", it is regarded an IP address "0.1.226.64" is specified.)
After modification
A numeric string cannot be specified as a host name. If a numeric string is specified, the following error message is output.
hanet: 10500: operation error: invalid ip_address. ip=xxxxx |
