Error VSYS10096 is Output when Subscribing or Reconfiguring an L-Platform

Cause

The cause is one of the following:

If the following message is output to vsys_trace_log, there is a possibility that image information has not been synchronized.
```
VSYS10096 Status[404] returned from CBRM is illegal.[code: 67154][message: server image link id=xxxxx:not found]
```
If the following message is output to vsys_trace_log, there is a possibility that two or more NICs have been defined in the L-Server template.
```
VSYS10096 Status[412] returned from CBRM is illegal.[code:62501][message:NICs.NIC.NetworkLink:is required]
```

Take action 1 in response to cause 1 and action 2 in response to cause 2.

The above error occurs if there is no cloning image associated with a piece of image information.

Synchronize the image information using the following procedure:
1. Open the [Templates] tab in the ROR console and display the image information.
2. If a warning icon is displayed with the image information in the preceding step, it means that the cloning image has been deleted.
  
  In this case, create an L-Server with the same OS and software installed as the cloning image had, then from the L-Server re-collect the cloning image with the name displayed in the [Cloning image] column of the image information.
  
  This task is not required if there is no warning icon.
3. Hide all L-Platform templates using image information.
4. Click the [Synchronize] button for the image information.
  
  If the [Synchronize] button is disabled, click the reload button for the image information.
The above error is output when you specify a number of NICs that is less than the number of NICs defined in the L-Server template when creating a server in L-Platform management.

Set to 1 the number of NICs defined in the L-Server template used in L-Platform management.