Perform the Live Migration from ServerView Resource Orchestrator Cloud Edition.
If this operation is performed, "17.3.1.1 Operation before Performing Live Migration" and "17.3.1.2 Operation after Performing Live Migration" are unnecessary.
Note
Prerequisites in "17.2.1 Performing Live Migration of the Cluster on the Control Domains" are required before performing this operation.
Make sure that following items are consistent on all control domains of the target clusters: a combination of a user name and password for the XSCF that is registered in the shutdown facility, and the connection method to the XSCF.
Check that the following settings have been performed for the destination servers:
If you perform this operation, a cluster system will not be switched until Live Migration is completed.
Do not perform the Live Migration during a cluster system switchover.
When performing the Live Migration, the saved configuration information of the logical domains should not be above 6. Execute the following command to check the saved configuration information of the logical domains.
Check that "config_tmp" does not exist in the saved configuration information name of the logical domains as well.
# ldm list-spconfigWhen the saved configuration information of the logical domains is 7 or more, use the following command to delete the configuration information of the logical domains to 6 or less.
# ldm remove-spconfig configuration nameIf "config_tmp" exists in the configuration information name of the logical domains, execute the following command to delete the configuration information name "config_tmp."
# ldm remove-spconfig config_tmpFor details on the configuration information of the logical domains, see "Operations and Commands Related to Logical Domain Configurations" in "Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 Domain Configuration Guide."
Perform the Cold Migration from ServerView Resource Orchestrator Cloud Edition to start the stopped guest domain that was migrated by the Cold Migration.
If this operation is performed, "17.3.2.1 Operation before Performing Cold Migration" and "17.3.2.2 Operation after Performing Cold Migration" are unnecessary.
Note
Prerequisites in "17.2.1 Performing Live Migration of the Cluster on the Control Domains" are required before performing this operation.
Make sure that following items are consistent on all control domains of the target clusters: a combination of a user name and password for the XSCF that is registered in the shutdown facility, and the connection method to the XSCF.
Check that the following settings have been performed for the destination servers:
When performing the Cold Migration, the saved configuration information of the logical domains should not be above 6. Execute the following command to check the saved configuration information of the logical domains.
Check that "config_tmp" does not exist in the saved configuration information name of the logical domains as well.
# ldm list-spconfigWhen the saved configuration information of the logical domains is 7 or more, use the following command to delete the configuration information of the logical domains to 6 or less.
# ldm remove-spconfig configuration nameIf "config_tmp" exists in the configuration information name of the logical domains, execute the following command to delete the configuration information name "config_tmp."
# ldm remove-spconfig config_tmpFor details on the configuration information of the logical domains, see "Operations and Commands Related to Logical Domain Configurations" in "SPARC M10 Systems Domain Configuration Guide."