WARNING: spare disk disk too small
Explanation
The size of disk is too small and may not function as a spare disk.
Resolution
Specify a larger disk, and execute the command again.
WARNING: device: write error, errno=errno
Explanation
A write error occurred in physical disk device.
Resolution
If device is a write-locked disk that is connected to a switch group, no action is required. Otherwise, remove device from the class and check the status of device.
WARNING: group: free blocks are reduced
Explanation
Free blocks on group were reduced.
Resolution
You may not be able to create a volume with sufficient capacity. Execute commands as needed and attempt recovery.
WARNING: another disk must be connected to group
Explanation
You must connect another disk to group.
Resolution
Connect another disk.
WARNING: object: copying not completed successfully
Explanation
Synchronization copying did not complete successfully.
Resolution
Disk failure may have occurred. Identify the cause by referring to GDS log message and syslog message.
WARNING: object: gave up wait for the completion of copying by a cancel request
Explanation
Synchronization copying was canceled before completion.
Resolution
Check the status of the object object. If the copying is in progress, there is no need to work around. If it is not in progress, re-execute the copying where it is necessary.
For details, see "Appendix D Command Reference."
WARNING: cannot set use-nvramrc? parameter to true, NVRAMRC not emptyExplanation
Since a command is already registered with NVRAMRC, use-nvramrc? parameter cannot be set to "true."
Resolution
For details, see "A.2.9 System Disk Mirroring."
WARNING: group: no spare disk available
Explanation
There is no valid spare disk in group.
Resolution
Define a spare disk as needed.
WARNING: object.volume: cannot attached due to in status status
Explanation
Slice object.volume could not be attached since it is in status status.
Resolution
Check the slice status and cancel status status as needed.
WARNING: volume: no need to resize volume
Explanation
There was no need to resize the volume volume.
Resolution
No particular resolution required.
WARNING: disk.volume: special file(s) not found
Explanation
Special file for slice disk.volume could not be found.
Resolution
No particular resolution required.
WARNING: node: node in stopped status
Explanation
node is in STOP status.
Resolution
No particular resolution required. However, promptly activating the node is recommended.
WARNING: node: node in abnormal status
Explanation
node is in abnormal status.
Resolution
No particular resolution required. However, promptly recovering the node and activating it normally is recommended.
WARNING: object: already in status status
Explanation
object is already in status status.
Resolution
No particular resolution required.
WARNING: disk : device : write error, errno=errno
Explanation
A write error occurred on physical disk device.
Resolution
If device is a write-locked disk that is connected to a switch group, no action is required. In other situations, have device exchangeable and check its status.
WARNING: disk : device : node: write error, errno=errno
Explanation
A write error occurred on physical disk device on node node.
Resolution
If device is a write-locked disk that is connected to a switch group, no action is required. In other situations, have device exchangeable and check its status.
RNING: object: no need to update attribute value
Explanation
There was no need to change object attributes.
Resolution
No particular resolution required.
WARNING: pslice: entry in /etc/vfstab not updated, unsupported file system type fstype
Explanation
Entry in the /etc/vfstab file relevant to the physical slice pslice was not updated since fstype is a file system type not supported by the sdxroot command.
Resolution
Edit the /etc/vfstab file or change the file system configuration according to need.
WARNING: correct /etc/vfstab and file system configuration before rebooting, or system may not be booted
Explanation
Invalid entry is included in the /etc/vfstab file. If such file system entry as /(root), /usr, and /var essential to system start-up is invalid, the system cannot be started when rebooted.
Resolution
Refer to a GDS's WARNING message output just before this message and pinpoint the invalid entry in the /etc/vfstab file. Be sure to repair the /etc/vfstab file and the file system configuration as appropriate prior to rebooting the system.
WARNING: volume: entry in /etc/vfstab not updated, unsupported file system type fstype
Explanation
Since file system type fstype is not supported, entry in /etc/vfstab file for volume could not be updated.
Resolution
Directly edit /etc/vfstab as necessary.
WARNING: ignored parameter param for EC
Explanation
Since EC function will be used for copying, parameter param was ignored.
WARNING: ignored parameter param for OPC
Explanation
Since OPC function will be used for copying, parameter param was ignored.
WARNING: ignored parameter param for TimeFinder
Explanation
Parameter param was ignored for copying with TimeFinder.
WARNING: ignored parameter param for SRDF
Explanation
Parameter param was ignored for copying with SRDF.
WARNING: proxy: no session
Explanation
No copy session exists between the proxy proxy and the master
Resolution
No special action is required.