A configuration example of IPCOM VX series configured for linking with Ethernet fabrics is shown in "Figure J.1 Network Device (IPCOM VX Series) Management Unit".
Resource Orchestrator manages IPCOM VX series devices as a single management host network device. Each IPCOM VA in an IPCOM VX series device is managed as a network device (firewall or server load balancer).
For the port name of the Ethernet fabric to specify for the link information of the network configuration information necessary for registration as a network device, specify an IEEE802.1ad frame communication port with the type EP (End Point) and CIR (Clean Interface with Redundancy). The port type can be either EP or CIR.
For details on how to confirm the port name to specify, refer to "9.4.8.1 When Creating Network Configuration Information (XML Definition)".
For the admin IP address to specify when stating the network device information in the network configuration information, specify the admin IP address configured for the IPCOM VX series device or IPCOM VA.
The following configuration diagram is based on the assumption that the VFAB is set to network mode.
Figure J.1 Network Device (IPCOM VX Series) Management Unit
