This is the log when the client (CT) environment is changed. Logs are collected in the cases below:
The IP address of the client (CT) is changed
An emergency procedure is performed/canceled
How to apply
The IP address of the client (CT) is changed
By combining with other operation logs, the locations where the operations are actually performed can be determined.
However, this is limited to cases where the allocation of IP addresses inside the WAN, and so on, is already known.
An emergency procedure is performed/canceled
By viewing the operation logs from the performance of an emergency procedure through to cancellation of an emergency procedure, the behavior of the client (CT) can be checked.
Set policy for collection
Set policy in the Terminal Initial Settings window, or the window after the Management Console is started (CT policy settings window).
In Windows > Log collection operation, set Environment change log To Yes.
The log with the type Emergency Procedure is collected regardless of the setting when the emergency procedure is implemented.
Displayed content
The log content below can be viewed:
Name: name of the client (CT)
Occurrence Date and Time: time for collecting logs at the client (CT)
User ID: logon user name of the client (CT)
Domain Name: domain name of the client (CT) when logging on to the domain, or the computer name of the client (CT) when logging on to a local computer
Type: Environment change (fixed value)
Classification: normal
Attachment: (Not displayed)
Content: the following content is displayed.
The IP address of the client (CT) is changed
IP address before change (*1)
Up to five IPv4 addresses, or up to five IPv6 addresses are displayed.
IP address after change (*1)
Up to five IPv4 addresses, or up to five IPv6 addresses are displayed.
Example of Content:
Type: IP address change, Before change:[198.51.100.1]/[2001:db8:3::c], After change: [192.0.2.1]/[2001:db8:10::ee1]
An emergency procedure is performed/canceled
Type: Emergency procedure (fixed value) (*1)
Perform or Cancel (*1)
Example of Content:
Type: Emergency procedure, Perform
*1: When performing a keyword search in the Log Viewer, the value inside [ ] can be specified as a keyword.
Note: (Not displayed)
