Systemwalker Desktop Keeper User's Guide for Administrator

2.4.2 Perform Emergency Procedure Settings

In the emergency procedure settings, configure the conditions for prohibiting operations on the client (CT) during an emergency, and the logs to be collected.

Only a system administrator can select the Emergency Procedure Settings menu.

For a 3-layer system structure, configure the settings from the Management Console connected to the Master Management Server. The Emergency Procedure Settings menu cannot be selected in a Management Console connected to a downstream Management Server.

Follow the procedure below:

1. Start the Management Console.

2. Click Operation Settings > Emergency Procedure Settings.

   The Emergency Procedure Settings window will be displayed.

   

3. In the emergency procedure settings, the initial values are as follows.
   Set each policy, and then click Set.

   Refer to "2.4.1 Perform Terminal Initial Settings" for details on the settings content of each policy.

   Log collection operations

   Setting	Initial value
   Log collection operation	Terminal initial settings value
   File operation	Terminal initial settings value
   Window title filter	Terminal initial settings value
   Window title screen capture	Terminal initial settings value

   Prohibition operations

   Setting			Initial value
   Logon			Terminal initial settings value
   Applications			Terminal initial settings value
   Device	Prohibited device		The initial values are as follows: Wi-Fi connection: True Bluetooth: True PC Card: True Allow PCI ExpressCard Device: False Infrared communication: True Serial Port/Parallel Port: True IEEE1394: True
   File export/read	File Export Utility		The initial values are as follows: cannot be used: True can be used: False
   		File Export Utility function setting	Terminal initial settings value
   		Detailed Settings of Encryption Method	Terminal initial settings value
   	Explorer	File access control	The initial values are as follows: Yes: True Display message when prohibited: True
   		Reading prohibition	The initial values are as follows: Removable: False DVD/CD: False Network: False
   		Portable devices/imaging Device connection prohibition	The initial values are as follows: Portable device: True Imaging device: True
   		Details	Terminal initial settings value
   	Export Prohibition	Please select the drive to be prohibited (export destination)	The initial values are as follows: A-B: True C: False D-Z: True
   		Specify drive type	The initial values are as follows: Removable: True DVD/CD: True Network: True
   	Individual Identification		Do not Use: Selected
   	Alerts		Terminal initial settings value
   Print/PrintScreen			Terminal initial settings value
   Internet			Terminal initial settings value
   Clipboard			Terminal initial settings value
   Send log			Terminal initial settings value

   The emergency procedure settings are changed for the client (CT) when:

   • Update Immediately is selected for the CT policy in the Management Console

   • The automatic policy acquisition feature is running

   Note

   If an emergency procedure request is made before the emergency procedure settings policy is distributed, immediately after installation of the client (CT), the initial values of the emergency procedure settings will be applied.