KZONE shutdown agent is the shutdown agent for SPARC M10 and SPARC T4, T5, T7, S7 series. It is used in the Oracle Solaris Kernel Zones environment when using PRIMECLUSTER.
Setup and configuration
See "Oracle VM Server for SPARC Guide" and "Creating and Using Oracle Solaris Kernel Zones" for how to configure Oracle Solaris Kernel Zones.
As KZONE shutdown agent, use XSCF when building PRIMECLUSTER on SPARC M10, and use ILOM when building PRIMECLUSTER on SPARC T4, T5, T7, S7 series.
For XSCF
The XSCF must be configured according to "Fujitsu SPARC M12 and Fujitsu M10/SPARC M10 System Operation and Administration Guide."
Moreover, you must set the user name and password to allow the operation in XSCF.
For details, see "5.1.2.5.1 Checking XSCF Information" of the "PRIMECLUSTER Installation and Administration Guide."
For ILOM
The ILOM must be configured according to the directions below:
Integrated Lights Out Manager (ILOM) 3.0 Concepts Guide
Integrated Lights Out Manager (ILOM) 3.0 Web Interface Procedures Guide
Integrated Lights Out Manager (ILOM) 3.0 CLI Procedures Guide
Integrated Lights Out Manager (ILOM) 3.0 Getting Started Guide
Moreover, you must set the user name and password to allow the operation in ILOM.
For details, see "5.1.2.5.2 Checking ILOM Information" of the "PRIMECLUSTER Installation and Administration Guide."
Shutdown Agent
There are three kinds of KZONE shutdown agents:
SA_kzonep-panics the node (kernel zones)
SA_kzoner-resets the node (kernel zones)
SA_kzchkhost-detects an error in the node on which the kernel zones are working
KZONE log file
/var/opt/SMAWsf/log/SA_kzonep.log /var/opt/SMAWsf/log/SA_kzoner.log /var/opt/SMAWsf/log/SA_kzchkhost.log
Note
To make XSCF-LAN redundant, XSCF-LAN#0 and XSCF-LAN#1 should use different subnets.
The IP address of ILOM should belong to the same segment as the Administrative LAN.
However, if the network routing is configured, the IP address of ILOM does not need to belong to the same segment as the Administrative LAN of the cluster node.
