The name used to identify the network pool is displayed.
The type of the network pool is displayed.
The priority for automatic selection of resources when multiple network pools are available is displayed.
The label for the network pool is displayed.
Comments for the network pool are displayed.
The total number of IP addresses registered in the network pool is displayed.
The number of unused IP addresses registered in the network pool is displayed.
The network resource name is displayed.
Whether it is being used as an admin LAN is displayed.
When used as an admin LAN
"yes" is displayed.
When not used as an admin LAN
"no" is displayed.
The LAN for iSCSI boot is displayed.
The VLAN ID for the network resource is displayed.
The subnet address of the network resource is displayed.
The subnet mask of the network resource is displayed.
The total number and number of unused IP addresses registered in the network resource are displayed.
The network device name is displayed.
The model name is displayed.
The operational status of the network device is displayed.
The available usage for the network device is displayed.
The ruleset name is displayed.
The name of the network device that has been allocated is displayed.
The number of L-Platforms that can be deployed (unused number and total number) is displayed.
When not using the NS Appliance in simple configuration mode, "- / -" is displayed.
Network Device Attributes
For details, refer to "A.7.5 Network Device Attributes".
Network Resource Attributes
The network resource name is displayed.
The network resource is displayed.
The label for the network resource is displayed.
Comments for the network resource are displayed.
The total number of IP addresses registered in the network pool is displayed.
The number of unused IP addresses registered in the network pool is displayed.
Whether it is to be used as an admin LAN is displayed.
When used as an admin LAN
"yes" is displayed.
When not used as an admin LAN
"no" is displayed.
The LAN for iSCSI boot is displayed.
Whether configured virtual switches/port profiles are used is displayed.
When configured virtual switches/port profiles are used
"yes" is displayed.
When configured virtual switches/port profiles are not used
"no" is displayed.
Whether automatic VLAN configuration for uplink ports is performed is displayed.
When automatic configuration is performed
"yes" is displayed.
When automatic configuration is not performed
"no" is displayed.
The start address of the IP addresses to be automatically configured is displayed.
The end address of the IP addresses to be automatically configured is displayed.
The subnet address of the network resource is displayed.
The subnet mask of the network resource is displayed.
The default gateway is displayed.
The VLAN ID for the network resource is displayed.
The ruleset for the network resource is displayed.
A hyphen ("-") is displayed if the ruleset has not been set.
The physical LAN segment set for the network resource is displayed.
When no physical LAN segment is set, a hyphen ("-") is displayed.
The physical LAN segment item will not be displayed if no server NIC has been defined.
The start address of the IP addresses to be excluded from automatic configuration is displayed.
The end address of the IP addresses to be excluded from automatic configuration is displayed.
The chassis name is displayed.
For Ethernet fabric switches, a hyphen ("-") is displayed.
The switch name is displayed.
The external connection port number of the LAN switch blade or the port name of the Ethernet fabric switch is displayed.
For link aggregation of LAN switch blades, the physical port numbers of the member ports that constitute the link aggregation are displayed.
A hyphen ("-") is displayed if the link aggregation configuration has been released.
If link aggregation, then the link aggregation group name is displayed.
A hyphen ("-") is displayed in the following cases:
Physical ports of LAN switch blades
Ethernet fabric switches
The VLAN type is displayed.
When used as Tagged VLAN
"tagged" is displayed.
When used as Untagged VLAN
"untagged" is displayed.
When VLAN is not used
"none" is displayed.
For Ethernet fabric switches
A hyphen ("-") is displayed.
The following information is displayed when automatic network configuration has been performed on the target of network resource automatic configuration or when a VM host on which automatic network configuration has been performed exists in the cluster.
The cluster is displayed.
The VM host name is displayed.
The VM Type (VMware or Hyper-V) is displayed.
VMware
Hyper-V
When the VM type is VMware, the virtual switch and port group names are displayed.
When it is Hyper-V, the virtual network name is displayed.
A hyphen ("-") is displayed in the following cases.
When a configuration change made by the user with VM management software after automatic configuration is detected by this product
In the following case, "(manual)" is displayed after the virtual switch and port group names.
When the same configuration as the one to be configured automatically has been created by the user beforehand
