The name used to identify a chassis is displayed.
The system name of the chassis is displayed.
Displayed only for PRIMEQUEST servers.
The model name of the chassis is displayed.
The chassis admin IP address is displayed.
The status of the chassis is displayed.
The number of server blades mounted in the chassis is displayed.
Displayed only when the chassis of a blade server is selected.
The number of mounted partitions is displayed.
Displayed only when the chassis of a PRIMEQUEST, SPARC Enterprise M4000/M5000/M8000/M9000, or Fujitsu M10-4S is selected.
The number of LAN switch blades mounted in the chassis is displayed.
Displayed only when the chassis of a blade server is selected.
See
Refer to "11.2 Resource Status" in the "Operation Guide CE" for details on resource statuses.
The link to the management blade's Web interface is displayed.
Not displayed for SPARC Enterprise M4000/M5000/M8000/M9000 or Fujitsu M10-4S.
The link to the remote management controller (XSCF) Web UI is displayed.
Only displayed for SPARC Enterprise M4000/M5000/M8000/M9000 or Fujitsu M10-4S.
The following information is only displayed when the chassis of a PRIMEQUEST 1000 series, SPARC Enterprise M4000/M5000/M8000/M9000, or Fujitsu M10-4S is selected.
The partition number is displayed.
The name used to identify a partition is displayed.
The ID of the system board used to configure a partition is displayed.
The ID of the IO board used to configure a partition is displayed.
The ID of the GSPB used to configure a partition is displayed.
The ID of the Reserved SB assigned to a partition is displayed.
The partition logical system board (LSB) number is displayed.
Only displayed for SPARC Enterprise M4000/M5000/M8000/M9000 or Fujitsu M10-4S.
The partition eXtended System Board (XSB) number is displayed.
Only displayed for SPARC Enterprise M4000/M5000/M8000/M9000 servers.
The partition physical system board (PSB) number is displayed.
Only displayed for Fujitsu M10-4S.
This is only displayed for the PRIMEQUEST 2000 series.
The partition number is displayed.
The name used to identify a partition is displayed.
The availability of the PPAR partition is displayed. When usable, "OK" is displayed. When not usable, "NG" is displayed.
The Extended Partition number is displayed.
The ID of the system board used to configure a partition is displayed.
The ID of the IOU used to configure a partition is displayed.
The ID of the DU used to configure a partition is displayed.
The ID of the PCI_BOX_LH used to configure a partition is displayed.
The ID of the Reserved SB assigned to a partition is displayed.
This is only displayed for the PRIMEQUEST 2000 series.
The partition number is displayed.
The name used to identify a server is displayed.
The name used to identify a partition is displayed.
The availability of Extended Partition is displayed. When usable, "OK" is displayed. When not usable, "NG" is displayed.
The number of the PPAR to which the Extended Partition is allocated is displayed.
The total number of physical CPU cores is displayed.
For PRIMEQUEST 2000 series Extended Partition servers, "CPU core count" is displayed.
The total capacity of server memory is displayed.
The information of memory EXCL is displayed.
The information of SKT Binding is displayed.
PCI Express slot information is displayed.
The information of Home SB VGA/USB is displayed.
GbE information is displayed.
Disk unit information is displayed.
