This section explains the methods for registering SPARC Enterprise (M3000/T series) and Fujitsu M10-1/M10-4.
This section also describes how to register servers in SPARC Enterprise M4000/M5000/M8000/M9000 and Fujitsu M10-4S chassis.
[Solaris Zones] [OVM for SPARC]
When the Logical Domains Manager daemon is enabled, VM hosts can be registered as Solaris Zones by configuring the definition files.
For details, refer to "Appendix G Definition Files" in the "Setup Guide CE".
Use the following procedure to register servers:
The dialog is displayed.
For SPARC Enterprise (M3000/T series)
In the ROR console server resource tree, right-click [Server Resources], and select as below.
Select [Register]-[SPARC Enterprise (M3000/T Series)] from the popup menu.
The [Register SPARC Enterprise] dialog is displayed.
For Fujitsu M10-1/M10-4
In the ROR console server resource tree, right-click [Server Resources], and select as below.
Select [Register]-[SPARC (M10-1/M10-4)] from the popup menu.
The [Register SPARC (M10-1/M10-4)] dialog is displayed.
For SPARC Enterprise M4000/M5000/M8000/M9000 or Fujitsu M10-4S
Right-click the server in the chassis, and select as follows:
Select [Register]-[Server] from the popup menu.
The [Register Server] dialog is displayed.
Perform the following settings:
When using SPARC Enterprise M4000/M5000/M8000/M9000 or Fujitsu M10-4S, the items related to Remote Management Controller are not displayed.
When using Fujitsu M10-1/M10-4, the items related to Controller type are not displayed.
Physical server name
[Register agent] checkbox
Remote management controller (ILOM/XSCF)
Controller type
IP address
User ID
Password
SNMP Community
Admin LAN
IP address
For SPARC Enterprise M4000/M5000/M8000/M9000 servers and Fujitsu M10-4S, "admin LAN (IP address)" is displayed.
With Agent Registration
OS
Type
User ID
Password
Enter a name to assign to this physical server.
Enter a character string beginning with an alphabetical character and containing up to 15 alphanumeric characters and hyphens ("-").
Without Agent Registration
Automatic registration of agents is not performed after server registration.
After registering servers, register agents as required.
If registering agents, register agents after checking the product name is displayed in the General Area of [Resource Details] tab.
Executing [Update] acquires the latest information.
With Agent Registration
Agents are automatically registered after server registration is completed.
For SPARC Enterprise M3000 servers
Select [XSCF].
Enter the IP address of this server's remote management controller (XSCF).
Enter the ID of a XSCF user account with administrative authority over this server.
Enter up to 31 characters, including alphanumeric characters, underscores ("_"), or hyphens ("-"). This name should start with an alphabet character.
This user should have "platadm" privileges for XSCF.
The user ID reserved for the system cannot be used. Create another user ID.
For details, refer to the XSCF manuals.
Enter the password of the above XSCF user account.
Enter up to 32 characters, including alphanumeric characters, blank spaces (" "), and any of the following symbols.
"!", "@", "#", "$", "%", "^", "&", "*", "[", "]", "{", "}", "(", ")", "-", "+", "=", "~", ",", ">", "<", "/", "'", "?", ";", ":"
Enter the SNMP community that was set on this server's remote management controller (XSCF).
Either select [public] or enter an arbitrary string.
Enter a string of up to 32 alphanumeric characters, underscores ("_"), and hyphens ("-").
For SPARC Enterprise T series
Select [ILOM].
Enter the IP address of this server's remote management controller (ILOM).
Enter the ID of an ILOM user account with administrative authority over this server.
Enter between 4 and 16 characters, including alphanumeric characters, underscores ("_"), or hyphens ("-"). This name should start with an alphabet character.
This user ID should have "Admin" privileges for ILOM.
Enter the password of the above ILOM user account.
Enter between 8 and 16 characters, including alphanumeric characters, blank spaces (" "), and any of the following symbols.
"!", "@", "#", "$", "%", "^", "&", "*", "[", "]", "{", "}", "(", ")", "-", "+", "=", "~", ",", ">", "<", "/", "'", "?", ";", ":"
Enter the SNMP community name of this server's remote management controller (ILOM).
Either select [public] or enter an arbitrary string.
Enter a string of up to 32 alphanumeric characters, underscores ("_"), and hyphens ("-").
Enter the IP address used by this server on the admin LAN.
For SPARC Enterprise M4000/M5000/M8000/M9000 servers and Fujitsu M10-4S, "admin LAN (IP address)" is displayed.
Select the appropriate server OS category (Physical OS or VM host).
Selecting [VM Host] activates the user name and password input fields.
Those refer to the user name and password entered during installation of this VM host.
For a Physical OS
Select [Solaris].
For a VM Host
Select [Solaris Zone], and enter the VM host login account information.
This login account information will be used by Resource Orchestrator to control and communicate with the registered VM host.
Note
[OVM for SPARC]
Server switchover is only possible when [VM host] is selected and it is registered as OVM for SPARC.
Enter the user ID to log in to the VM host.
Specify the user ID "root" which has VM host administrator authority.
Note
When using Solaris 11, if user accounts are created during installation, root will be registered for the role. Therefore, the root account cannot be used for login. Log in using the user account, and use the su command to become a root user.
When using Solaris 10 or earlier versions, execute the following as root in order to change to enable direct login using the root account. In this case, the root role is recognized as a root user.
rolemod -K type=normal root <RETURN> |
Use SSH connection with the root account, and check if communication with the VM host is possible.
If communication fails, modify the configuration. For details, refer to the manual of the basic software.
Enter the password of the user to log in to the VM host.
Enter up to 256 characters, including alphanumeric characters, blank spaces (" "), and symbols.
Click the [OK] button.
The registered server will be displayed in the server resource tree.
Note
After registering the server, verify that the information registered for the remote management controller is correct. This can be verified by trying out power operations (from Resource Orchestrator) against that server. For details on power operations, refer to "Chapter 14 Power Control" in the "User's Guide VE".
