This section describes the incompatible functions of GLS 4.3A20 from the previous version.
[Incompatible Contents]
After the stphanet command or the delete subcommand of the hanetnic command is executed, physical adapters which have been bundled in the virtual adapter can use the same network functions as before bundled.
[Changes 1]
Before modification
For physical adapters which have been bundled in the virtual adapter, all installed network functions are checked.
After modification
For physical adapters which have been bundled in the virtual adapter, the same network functions as before bundled are checked.
[Changes 2]
Before modification
The GLS driver is checked on all network adapters after installing GLS.
After modification
The GLS driver is not checked on all network adapters after installing GLS.
[Changes 3]
Before modification
With physical adapters bundled in the virtual adapter, the check status of the GLS driver is not changed depending on whether the virtual adapter is activated or deactivated.
After modification
With physical adapters bundled in the virtual adapter, the check status of the GLS driver is changed as follows, depending on whether the virtual adapter is activated or deactivated.
After the virtual adapter is activated:
The GLS driver is checked.
After the virtual adapter is deactivated:
The GLS driver is not checked.
Point
The check status of the network function is displayed in the [Properties] window by selecting a physical adapter in [Control Panel]-[Network Connections].
