Top
ServerView Resource Orchestrator V3.2.0 Release Notes
FUJITSU Software

2.3.8 Compatibility Issues between V3.1.2 and V3.1.1/V3.1.1A (T007664LP-05/T007676WP-07)

This section explains incompatibility between V3.1.2 and V3.1.1/V3.1.1A (T007664LP-05/T007676WP-07).

2.3.8.1 Access Authority Customize Commands

Details of Modification

The following access authority customize commands have become unavailable.

Corrective Action

Use the following command for role operations.

Executing the access authority customize commands displays the following message and processes nothing.

This command is no longer available.
Use the "rcxadm role" command instead.

2.3.8.2 Display of the Application List Tab, Tenant Tab, and Usage Charge Tab on the ROR Console

Details of Modification

The display of the Application List tab, Tenant tab, and Usage Charge tab on the ROR console has changed as follows:

Corrective Action

2.3.8.3 Registration of Cloning Images in an Image Pool or Collection of Cloning Images from L-Servers

Details of Modification

When performing the following operations, images with the same name as existing cloning images in the image pool cannot be registered.

For V3.1.1/V3.1.1A (T007664LP-05/T007676WP-07)

In earlier versions, the manuals instructed users not to register images of different types (*1) which have the same name in an image pool.

*1: There are three types of images:

  • Physical L-Server Images

  • VMware, Hyper-V, OVM for x86 2.2, OVM for x86 3.x, Citrix Xen, Solaris Zones, and OVM for SPARC Images

  • KVM and Xen Images

For this reason, when images of different types with the same name were registered in an image pool against the instructions in the manual, the following problems occurred.

  • In the Resource List of the Resource tab, images of different types are displayed as a single image.

    For example, a VMware image and a KVM image are displayed as a single image.

  • If such an image is deleted or moved using a command, an unexpected image may be deleted or moved.

For V3.1.2

If there are images of different types with the same name in an image pool, new images of different types cannot be registered using the same names as the existing images in that image pool.


Corrective Action

Modify the image pool configuration so that there are no images of different types with the same name.
Create an image pool using the ROR console, then move the image there.


2.3.8.4 Switchover of Maintenance Mode for Network Devices

Details of Modification

When switching over maintenance mode for network devices, modification using the network configuration information is not possible, as described below.

For V3.1.1/V3.1.1A (T007664LP-05/T007676WP-07)

Switchover of maintenance mode is possible using the switchover operation of maintenance mode.
Switchover of maintenance mode is also possible by changing network device settings using the network configuration information.

For V3.1.2

Switchover of maintenance mode is possible using the switchover operation of maintenance mode.
Switchover of maintenance mode by changing network device settings using the network configuration information is not possible.


Corrective Action

To place a network device into maintenance mode, perform the switchover operation of maintenance mode.
For details on the switchover operation of maintenance mode, refer to "22.1 Switchover of Maintenance Mode" in the "User's Guide for Infrastructure Administrators (Resource Management) CE".


2.3.8.5 [Software Details] button

Details of Modification

If there is no software information but OS software information when [Software Details] button is clicked, the message that says there is no software information was displayed with earlier versions. But OS software information is displayed in that case now.


Corrective Action

Follow the procedure below to configure the backward compatible mode.

  1. Open the Manager View settings file in a text editor.

    The Manager View settings file is stored in the following location:

    [Windows Manager]

    Installation_folder\RCXCTMG\MyPortal\config\managerview_config.xml

    [Linux Manager]

    /etc/opt/FJSVctmyp/config/managerview_config.xml
  2. Add the following key and value.

    Key name

    Content

    software-details-button-mode compatible

    Compatible mode

  3. Save the file.

  4. Restart the manager.

    Refer to "2.1 Starting and Stopping Managers" in the "Operation Guide CE" for information on the manager restart method.


Details of Modification

The result of the keyword search function for L-Platform templates has been changed.

Corrective Action

To make L-Platform templates separately searchable, specify keywords that will not be identical in case-insensitive searches when registering L-Platform templates.