ServerView Resource Orchestrator V3.2.0 Release Notes

2.3.7 Information about Incompatibility between V3.1.2 (T009379LP-02/T009378WP-02) and V3.1.2

This section explains information about incompatibility between V3.1.2 (T009379LP-02/T009378WP-02) and V3.1.2.

2.3.7.1 For Reference Method of S-TAG Value in the Case of IPCOM VA

Details of Modification

Reference method of S-TAG value for IPCOM VA in ROR console has changed.

• For V3.1.2

  Confirm S-TAG value referring to "S-TAG" column.

  Columns	Content
  Port Number	The number of the port of the selected network device is displayed.
  Port Name	The name assigned to the port of the selected network device is displayed.
  Member Port	When the name of a port with link aggregation is displayed for the port name, the port names of the physical port with link aggregation are displayed separated by commas (","). When the physical port name is displayed as the port name, a hyphen ("-") is displayed. This is not displayed when an Ethernet Fabric is selected.
  Link Status	The operational status of the port is displayed. One of the following is displayed: up down unknown
  Speed/DuplexMode	The speed and duplex mode of the operating port are displayed.
  Link Aggregation Group	When the name of the port which comprises the link aggregation is displayed as the port name, the link aggregation name is displayed. When the name of the port that comprises the link aggregation is not displayed as the port name, a hyphen ("-") is displayed. This is only displayed when an Ethernet Fabric is selected.
  Port Type	The port type of the network device is displayed. One of the following is displayed: EP CIR EP(dot1ad) Displayed when using the EP port for sending and receiving of the IEEE802.1ad frame. CIR(dot1ad) Displayed when using the CIR port for sending and receiving of the IEEE802.1ad frame. This is only displayed when an Ethernet Fabric is selected.
  S-TAG	The S-TAG values used by the IPCOM VA virtual interface are displayed. This is only displayed when an IPCOM VA is selected.

• For V3.1.2 (T009379LP-02/T009378WP-02)

  Confirm the S-TAG value referring to the "VLAN ID" and "Distribution Mode" columns.

  Columns	Content
  Port Number	The number of the port of the selected network device is displayed.
  Port Name	The name assigned to the port of the selected network device is displayed.
  Member Port	When the name of a port with link aggregation is displayed for the port name, the port names of the physical port with link aggregation are displayed separated by commas (","). When the physical port name is displayed as the port name, a hyphen ("-") is displayed. This is not displayed when an Ethernet Fabric is selected.
  Link Status	The operational status of the port is displayed. One of the following is displayed: up down testing unknown dormant notPresent lowerLayerDown
  Speed/DuplexMode	The speed and duplex mode of the operating port are displayed.
  Link Aggregation Group	When the name of the port that comprises the link aggregation is displayed as the port name, the link aggregation name is displayed. When the name of the port that comprises the link aggregation is not displayed as the port name, a hyphen ("-") is displayed. This is only displayed when an Ethernet Fabric is selected.
  Port Type	The port type of the network device is displayed. One of the following is displayed: EP CIR EP(dot1ad) Displayed when using the EP port for sending and receiving of the IEEE802.1ad frame. CIR(dot1ad) Displayed when using the CIR port for sending and receiving of the IEEE802.1ad frame. This is only displayed when an Ethernet Fabric is selected.
  Distribution Mode	Displays packet distribution mode for ports. One of the following is displayed: VLAN(S-TAG) MAC VLAN(C-TAG) no-distribution VLAN(other) This is only displayed when an IPCOM VA is selected.
  VLAN ID	The VLAN ID values used for distribution to an IPCOM VA virtual interface are displayed. This is only displayed when an IPCOM VA is selected.

Corrective Action

When confirm S-TAG value, refer to "VLAN ID" and "Distribution Mode" columns.

For details on columns, refer to "A.7.5 Network Device Attributes" in the "User's Guide for Infrastructure Administrators (Resource Management) CE".

2.3.7.2 For Modification of Messages

Details of Modification

The message output when the state of the port of the network device changed has changed.

The message output when state of port of network device changes into unknown.

• For V3.1.2

  FJSVrcx:INFO:22784:device:Port port_name status change from prev_status to cur_status has been detected.

• For V3.1.2 (T009379LP-02/T009378WP-02)

  FJSVrcx:INFO:22784:device:Port port_name status change from prev_status to cur_status has been detected.(cause)

Corrective Action

When monitoring the corresponding messages output by Resource Orchestrator using other monitoring software, it is necessary to change the monitored messages.

When the messages before modification are described in the operation guide of a system created by a customer, it is necessary to revise the operation guide.

2.3.7.3 Modification of Execution Results in the Command that Updates Information for Network Devices

Details of Modification

Descriptions of the cases where an error occurs and the command to update information for network devices (rcxadm netdevice refresh -recreate) is terminated have been added.

• For V3.1.2

  The command to update information for network devices (rcxadm netdevice refresh -recreate) is returned normally.

• For V3.1.2 (T009379LP-02/T009378WP-02)

  When SNMP communication with target network devices is not possible, an error occurs and the command to update information for network devices (rcxadm netdevice refresh -recreate) is terminated.

Corrective Action

When an error occurs and the command to update information for network devices (rcxadm netdevice refresh -recreate) is terminated, it is necessary to remove the cause of the error.

For details on the rcxadm netdevice command, refer to "3.8 rcxadm netdevice" in the "Reference Guide (Command/XML) CE".