Use the [Save in CSV format] button to display downloaded CSV file items by category.
Note that the CSV file encoding is Shift-JIS.
This section describes CSV file items for different reports.
VMware rsc. usage cond. (List of host)
Item | Column name | Explanation | Unit | Description |
|---|---|---|---|---|
CPU(VMW_PCPU) | sdattim | Collection start time | yyyy/mm/dd HH:mm:ss | |
sysname | System name | |||
resrcid | Resource ID | Physical.CPU | ||
recid | Record ID | VMW_PCPU | ||
consflag | Interval (flag displayed) |
| ||
consintl | Interval | second |
| |
coverage | Data coverage ratio | Displays the ratio of data collected during the interval from 0 through 1 | ||
vmpcpul | CPU utilization | % | Average CPU usage ratio for physical CPUs | |
CPU(VMW_PCPU2) | sdattim | Collection start time | yyyy/mm/dd HH:mm:ss | |
sysname | System name | |||
resrcid | Resource ID | _Total | ||
recid | Record ID | VMW_PCPU2 | ||
consflag | Interval (flag displayed) |
| ||
consintl | Interval | second |
| |
coverage | Data coverage ratio | Displays the ratio of data collected during the interval from 0 through 1 | ||
vmpcusemhz | CPU usage | MHz | ||
vmpccorenum | CPU core Number | number | ||
vmpccoremhz | CPU speed per core | MHz | ||
Memory (VMW_PMEM) | sdattim | Collection start time | yyyy/mm/dd HH:mm:ss | |
sysname | System name | |||
resrcid | Resource ID | Physical.Memory | ||
recid | Record ID | VMW_PMEM | ||
consflag | Interval (flag displayed) |
| ||
consintl | Interval | second |
| |
coverage | Data coverage ratio | Displays the ratio of data collected during the interval from 0 through 1 | ||
vmpmemm | Physical memory size | Mbytes | ||
vmpmusedmem | Memory usage | Mbytes | ||
Disk(VMW_PDISK) | sdattim | Collection start time | yyyy/mm/dd HH:mm:ss | |
sysname | System name | |||
resrcid | Resource ID | Name of the device inside VMware | ||
recid | Record ID | VMW_PDISK | ||
consflag | Interval (flag displayed) |
| ||
consintl | Interval | second |
| |
coverage | Data coverage ratio | Displays the ratio of data collected during the interval from 0 through 1 | ||
vmpdreads | Disk reading count | reads | Physical disk | |
vmpdwrites | Disk writing count | writes | Physical disk | |
vmpdmbread | Read size | Mbytes | Physical disk | |
vmpdmbwrt | Write size | Mbytes | Physical disk | |
Network (VMW_NET) | sdattim | Collection start time | yyyy/mm/dd HH:mm:ss | |
sysname | System name | |||
resrcid | Resource ID | Names beginning with "vmnic" are physical NIC names; additionally, if the virtual machine name follows a colon, it is a virtual NIC. | ||
recid | Record ID | VMW_NET | ||
consflag | Interval (flag displayed) |
| ||
consintl | Interval | second |
| |
coverage | Data coverage ratio | Displays the ratio of data collected during the interval from 0 through 1 | ||
vmnppckttr | No. of outbound packets | packets | Physical or virtual network device port units | |
vmnpmvtr | Send size | Mbits | Physical or virtual network device port units | |
vmnppcktrecv | No. of inbound packets | packets | Physical or virtual network device port units | |
vmnpmbrecv | Receive size | Mbits | Physical or virtual network device port units | |
vmnvmname | Virtual machine name | If it is a virtual NIC, the virtual machine name is included. | ||
Hardware resources information (VMW_PCPU2) | sdattim | Collection start time | yyyy/mm/dd HH:mm:ss | |
sysname | System name | |||
resrcid | Resource ID | _Total | ||
recid | Record ID | VMW_PCPU2 | ||
consflag | Interval (flag displayed) |
| ||
consintl | Interval | second |
| |
coverage | Data coverage ratio | Displays the ratio of data collected during the interval from 0 through 1 | ||
vmpcusemhz | CPU usage | MHz | ||
vmpccorenum | CPU core Number | number | ||
vmpccoremhz | CPU speed per core | MHz | ||
Hardware resources information (VMW_PMEM) | sdattim | Collection start time | yyyy/mm/dd HH:mm:ss | |
sysname | System name | |||
resrcid | Resource ID | Physical.Memory | ||
recid | Record ID | VMW_PMEM | ||
consflag | Interval (flag displayed) |
| ||
consintl | Interval | second |
| |
coverage | Data coverage ratio | Displays the ratio of data collected during the interval from 0 through 1 | ||
vmpmemm | Memory size | Mbytes | Physical memory size | |
vmpmusedmem | Memory usage | Mbytes |
VMware rsc. usage cond. (Virtual machine stack)
Item | Column name | Explanation | Unit | Description |
|---|---|---|---|---|
CPU | sdattim | Collection start time | yyyy/mm/dd HH:mm:ss | |
sysname | System name | |||
resrcid | Resource ID | VMware unique ID is specified before the colon, and the virtual machine name is specified after the colon. | ||
recid | Record ID | VMW_GCPU | ||
consflag | Interval (flag displayed) |
| ||
consintl | Interval | second |
| |
coverage | Data coverage ratio | Displays the ratio of data collected during the interval from 0 through 1 | ||
vmgcusemhz | Virtual machine CPU usage | MHz | ||
vmname | Virtual machine name | |||
Memory | sdattim | Collection start time | yyyy/mm/dd HH:mm:ss | |
sysname | System name | |||
resrcid | Resource ID | VMware unique ID is specified before the colon, and the virtual machine name is specified after the colon. | ||
recid | Record ID | VMW_MEM | ||
consflag | Interval (flag displayed) |
| ||
consintl | Interval |
| ||
coverage | Data coverage ratio | Displays the ratio of data collected during the interval from 0 through 1 | ||
vmgmtm | Estimated size of the working set of a resource pool or a virtual machine | Mbytes | ||
vmmvmname | Virtual machine name | |||
Disk | sdattim | Collection start time | yyyy/mm/dd HH:mm:ss | |
sysname | System name | |||
resrcid | Resource ID | |||
recid | Record ID | VMW_DISK | ||
consflag | Interval (flag displayed) |
| ||
consintl | Interval | second |
| |
coverage | Data coverage ratio | Displays the ratio of data collected during the interval from 0 through 1 | ||
vmdreads | Disk reading count | reads | Physical disk | |
vmdwrites | Disk writing count | writes | Physical disk | |
vmdmbread | Read size | Mbytes | Physical disk | |
vmdmbwrt | Write size | Mbytes | Physical disk | |
vmdvmname | Virtual machine name | |||
Network | sdattim | Collection start time | yyyy/mm/dd HH:mm:ss | |
sysname | System name | |||
resrcid | Resource ID | |||
recid | Record ID | VMW_NET | ||
consflag | Interval (flag displayed) |
| ||
consintl | Interval | second |
| |
coverage | Data coverage ratio | Displays the ratio of data collected during the interval from 0 through 1 | ||
vmnppckttr | No. of outbound packets | packets | Physical or virtual network device port units | |
vmnpmvtr | Send size | Mbits | Physical or virtual network device port units | |
vmnppcktrecv | No. of inbound packets | packets | Physical or virtual network device port units | |
vmnpmbrecv | Receive size | Mbits | Physical or virtual network device port units | |
vmnvmname | Virtual machine name | If it is a virtual NIC, the virtual machine name is included. |
VMware virtual machine relocation simulation
Item | Column name | Explanation | Unit | Description |
|---|---|---|---|---|
CPU | sdattim | Collection start time | yyyy/mm/dd HH:mm:ss | |
sysname | System name | |||
resrcid | Resource ID | |||
recid | Record ID | VMW_GCPU | ||
consflag | Interval (flag displayed) |
| ||
consintl | Interval | second |
| |
coverage | Data coverage ratio | Displays the ratio of data collected during the interval from 0 through 1 | ||
vmgcusemhz | Virtual machine CPU usage | MHz | ||
Memory | sdattim | Collection start time | yyyy/mm/dd HH:mm:ss | |
sysname | System name | |||
resrcid | Resource ID | |||
recid | Record ID | VMW_MEM | ||
consflag | Interval (flag displayed) |
| ||
consintl | Interval | second |
| |
coverage | Data coverage ratio | Displays the ratio of data collected during the interval from 0 through 1 | ||
vmgmtm | Estimated size of the working set of a resource pool or a virtual machine | Mbytes | ||
Disk | sdattim | Collection start time | yyyy/mm/dd HH:mm:ss | |
sysname | System name | |||
resrcid | Resource ID | |||
recid | Record ID | VMW_DISK | ||
consflag | Interval (flag displayed) |
| ||
consintl | Interval | second |
| |
coverage | Data coverage ratio | Displays the ratio of data collected during the interval from 0 through 1 | ||
vmdreads | Disk reading count | reads | Physical disk | |
vmdwrites | Disk writing count | writes | Physical disk | |
vmdmbread | Read size | Mbytes | Physical disk | |
vmdmbwrt | Write size | Mbytes | Physical disk | |
Network | sdattim | Collection start time | yyyy/mm/dd HH:mm:ss | |
sysname | System name | |||
resrcid | Resource ID | |||
recid | Record ID | VMW_NET | ||
consflag | Interval (flag displayed) |
| ||
consintl | Interval | second |
| |
coverage | Data coverage ratio | Displays the ratio of data collected during the interval from 0 through 1 | ||
vmnppckttr | No. of outbound packets | packets | Physical or virtual network device port units | |
vmnpmvtr | Send size | Mbits | Physical or virtual network device port units | |
vmnppcktrecv | No. of inbound packets | packets | Physical or virtual network device port units | |
vmnpmbrecv | Receive size | Mbits | Physical or virtual network device port units |
Note
About the data output as CSV
At the collection start time, information for the analysis period is output. Data for anticipated periods in the future is not output.
This section describes CSV file items for different reports.
VMware rsc. usage cond. (List of virtual machine)
Item | Column name | Explanation | Unit | Description |
|---|---|---|---|---|
CPU | sdattim | Collection start time | yyyy/mm/dd HH:mm:ss | |
sysname | System name | |||
resrcid | Resource ID | VMware unique ID is specified before the colon, and the virtual machine name is specified after the colon. | ||
recid | Record ID | VMW_GCPU | ||
consflag | Interval (flag displayed) |
| ||
consintl | Interval | second |
| |
coverage | Data coverage ratio | Displays the ratio of data collected during the interval from 0 through 1 | ||
vmgcused | CPU utilization | % | ||
vmgcallmin | resource allocation (reserved) of a resource pool or a virtual machine | MHz | ||
vmgcallmax | resource allocation (Limit) of a resource pool or a virtual machine | MHz | If there is no limit, -1 will be displayed. | |
vmgcallshrs | resource allocation (Shared) of a resource pool or a virtual machine | MHz | The value for the shared memory of a VMware virtual machine | |
vmgcnumcpu | CPU number | number | ||
vmgcusemhz | Virtual machine CPU usage | MHz | ||
Memory | sdattim | Collection start time | yyyy/mm/dd HH:mm:ss | |
sysname | System name | |||
resrcid | Resource ID | VMware unique ID is specified before the colon, and the virtual machine name is specified after the colon. | ||
recid | Record ID | VMW_MEM | ||
consflag | Interval (flag displayed) |
| ||
consintl | Interval | second |
| |
coverage | Data coverage ratio | Displays the ratio of data collected during the interval from 0 through 1 | ||
vmgmallim | reserved memory of a resource pool or a virtual machine | Kbytes | ||
vmgmallmax | upper limit memory size of a resource pool or a virtual machine | Kbytes | If there is no limit, -1 will be displayed. | |
vmgmallsh | shared memory of a resource pool or a virtual machine | Kbytes | The value for the shared memory of a VMware virtual machine | |
vmgmmems | Physical memory size | Mbytes | resource pool or virtual machine units | |
vmgmtm | Estimated size of the working set | Mbytes | resource pool or virtual machine units | |
vmgmacest | Ratio of physical memory in use | % | resource pool or virtual machine units (instant value)<VMware ESX> |
Note
About the data output as CSV
At the collection start time, information for the analysis period is output. Data for anticipated periods in the future is not output.
This section describes CSV file items for different reports.
VM pool (CPU) (demand forecast)
Column name | Explanation | Unit | Description |
|---|---|---|---|
sdattim | Collection start time | yyyy/mm/dd HH:mm:ss | |
sysname | System name | ||
resrcid | Resource ID | tenanl name:/pool name | |
recid | Record ID | ROR_VMPOOLCPU | |
consflag | Interval (flag displayed) |
| |
consintl | Interval | second |
|
coverage | Data coverage ratio | Displays the ratio of data collected during the interval from 0 through 1 | |
vmpoolprocused | VMPool CPU usage | GHz | |
vmpoolproctotal | VMPool CPU total size | GHz |
VM pool (Memory) (demand forecast)
Column name | Explanation | Unit | Description |
|---|---|---|---|
sdattim | Collection start time | yyyy/mm/dd HH:mm:ss | |
sysname | System name | ||
resrcid | Resource ID | tenanl name:/pool name | |
recid | Record ID | ROR_VMPOOLMEM | |
consflag | Interval (flag displayed) |
| |
consintl | Interval | second |
|
coverage | Data coverage ratio | Displays the ratio of data collected during the interval from 0 through 1 | |
vmpoolmemused | VMPool memory usage | Gbytes | |
vmpoolmemtotal | VMPool total memory | Gbytes |
Storage pool (demand forecast)
Column name | Explanation | Unit | Description |
|---|---|---|---|
sdattim | Collection start time | yyyy/mm/dd HH:mm:ss | |
sysname | System name | ||
resrcid | Resource ID | tenanl name:/pool name | |
recid | Record ID | ROR_STORAGEPOOL | |
consflag | Interval (flag displayed) |
| |
consintl | Interval | second |
|
coverage | Data coverage ratio | Displays the ratio of data collected during the interval from 0 through 1 | |
vmpoolserverused | StoragePool usage | Gbytes | |
vmpoolservertotal | StoragePool total capacity | Gbytes |
Network pool (demand forecast)
Column name | Explanation | Unit | Description |
|---|---|---|---|
sdattim | Collection start time | yyyy/mm/dd HH:mm:ss | |
sysname | System name | ||
resrcid | Resource ID | tenanl name:/pool name | |
recid | Record ID | ROR_NETWORKPOOL | |
consflag | Interval (flag displayed) |
| |
consintl | Interval | second |
|
coverage | Data coverage ratio | Displays the ratio of data collected during the interval from 0 through 1 | |
vmpoolnetworkused | Number of addresses being used by NetworkPool | number | |
vmpoolnetworktotal | Total number of NetworkPool addresses | number |
Server pool (demand forecast)
Column name | Explanation | Unit | Description |
|---|---|---|---|
sdattim | Collection start time | yyyy/mm/dd HH:mm:ss | |
sysname | System name | ||
resrcid | Resource ID | tenanl name:/pool name | |
recid | Record ID | ROR_SERVERPOOL | |
consflag | Interval (flag displayed) |
| |
consintl | Interval | second |
|
coverage | Data coverage ratio | Displays the ratio of data collected during the interval from 0 through 1 | |
vmpoolserverused | Number of servers used by ServerPool | number | |
vmpoolservertotal | Total number of ServerPool servers | number |
Address pool (demand forecast)
Column name | Explanation | Unit | Description |
|---|---|---|---|
sdattim | Collection start time | yyyy/mm/dd HH:mm:ss | |
sysname | System name | ||
resrcid | Resource ID | tenanl name:/pool name | |
recid | Record ID | ROR_ADDRESSPOOL | |
consflag | Interval (flag displayed) |
| |
consintl | Interval | second |
|
coverage | Data coverage ratio | Displays the ratio of data collected during the interval from 0 through 1 | |
vmpooladdressused | Number of addresses used by AddressPool | number | |
vmpooladdresstotal | Total number of AddressPool addresses | number |
Note
About the data output as CSV
At the collection start time, information for the analysis period is output. Data for anticipated periods in the future is not output.