Folder name
The L-Platform deployed by ROR console are in a 1:1 correspondence with folders.
By changing the method for setting folder names, the L-Platform or tenant deployed by ROR console can be made to correspond to folders more easily.
L-Platform ID
This method sets the L-Platform ID as the name of the folder corresponding to the L-Platform to be deployed.
The L-Platform ID will be a string with 9 digits of random alphanumeric characters added to the first 8 characters of the tenant name.
Example
The result will be the following kind of string:
sosiki1-WCJFRUH6L
This setting is the default setting for ROR console It is recommended that this setting method be used in operational situations where there is no need to have the L-Platform deployed by this product correspond to r folders.
Tenant name + serial number
The folder name corresponding to the L-Platform deployed will be the first eight letters of the tenant name and a four-digit serial number.
Example
The result will be the following kind of string:
sosiki1-0001
This string is not displayed in the [L-Platforms] tab for ROR console, and so in order to maintain correspondence between the L-Platform deployed by this product and folders it is necessary to look up the system name and other information that have been set in the comment field for the folder.
It is recommended that this setting method be used when the correspondence between folders and each organization needs only to be maintained for operational purposes.
Note
Do not use this setting method in environments where a cumulative total of 10,000 or more systems are expected to be deployed within a single tenant.
If a cumulative total of 10,000 or more systems are deployed, the deployment will be executed normally, but a serial number with five or more digits will be added to the folder name.
Tenant name + L-Platform name
This method sets the tenant name followed by the L-Platform name specified with the [L-Platforms] tab of the ROR console as the name of the folder corresponding to the L-Platform to be deployed.
Example
The result will be the following kind of string:
sosiki1-system1
Because the L-Platform name specified by the user is included within the folder name as shown above, it is easier to find the system within the ROR console than the "L-Platform ID".
However, with this setting method, the string specified for the L-Platform name must consist of no more than 23 characters (alphanumeric characters, underscores and hyphens).
L-Platform name
The L-Platform name specified in the [Subscription] page of the [L-Platforms] tab will be the name of the folder of the deployed L-Platform.
As the folder name will use the L-Platform name specified by the user, it will be easier to find the L-Platform in the [Resources] tab of the ROR console than the "L-Platform ID".
To use this setting, however, ensure that the L-Platform name starts with an alphanumeric, and uses up to 32 characters consisting of alphanumerics, underscores, and hyphens.
It is recommended that this setting method be used if there is no operational requirement to specify Japanese text for system names.
L-Server name
The servers deployed by this product correspond to the L-Servers.
By changing the method for setting L-Server names, the servers deployed by ROR console can be made to correspond to L-Servers more easily.
Server ID
This method sets the server ID as the name of the L-Server that corresponds to the server to be deployed.
The server ID is a string where a four-digit serial number has been added to the L-Platform ID.
Example
The result will be the following kind of string:
sosiki1-WCJFRUH6L-S-0001
The server ID is not displayed in the [L-Platforms] tab of the ROR console, and so in order to maintain correspondence between L-Servers and the servers deployed by ROR console it is necessary to check the IP address and so on.
This setting method is the default setting for this product. It is recommended that this setting method be used in operational situations such as when there is no need to have the servers deployed by ROR console correspond to L-Servers.
Host name
This method sets the host name (computer name) as the name of the L-Server that corresponds to the server to be deployed.
The host name can be looked up in the operation window for the server virtualization software (such as VMware) and in guest operating systems. For this reason, it is recommended that this setting method be used when it is necessary to maintain server correspondence between this product and the server virtualization software.
Note
If this setting is performed using server virtualization software other than VMware or a virtual server, it is not possible to change the host name of a server when that server is active.
Alternatively, if the "server name"(Setting Method:2) has been set in "9.4 Setting the Host Names for Virtual Servers", the server name will not be able to be changed using L-Platform configuration modification when the server is active.
Server name
This method sets the server name specified with the [L-Platforms] tab of the ROR console as the name of the L-Server that corresponds to the server to be deployed.
It is recommended that this setting method be used in situations such as when there is a need to have the servers deployed by this product correspond to L-Servers.
However, with this setting method, the string specified for the server name must consist of no more than 64 characters (alphanumeric characters, underscores and hyphens) that start with an alphanumeric character.
Note
Do not specify names starting with "SUNW" for Solaris Zones server names.
If this setting is performed using server virtualization software other than VMware or a virtual server, it is not possible to change the server name when that server is active.
