Install the HBA address rename setup service using the following procedure.
Before installation, check if "2.4.1 Preparations" have been performed.
Log in to the system as the OS administrator (root).
Boot the managed server that the HBA address rename setup service is to be installed on in multi-user mode, and then log in to the system using root.
Set the first Resource Orchestrator DVD-ROM.
Execute the following command to mount the DVD-ROM.
# mount -t iso9660 -r /dev/hdc DVD-ROM_mount_point <RETURN>
Note
If the auto-mounting daemon (autofs) is used for starting the mounted DVD-ROM, the installer will fail to start due to its "noexec" mount option.
Execute the following installation command:
# cd DVD-ROM_mount_point <RETURN> # ./RcSetup.sh <RETURN>
Select "Cloud Edition".
Select "HBA address rename setup service installation".
Perform installation according to the installer's interactive instructions.
Settings when SELinux is Used
When enabling SELinux, it is necessary to perform configuration of SELinux after installing Resource Orchestrator.
For details on configuration, refer to "J.1.3 HBA address rename Setup Service".
Note
Corrective Action for Installation Failure
Execute the following command, delete the packages from the environment in which installation failed, and then perform installation again.
# cd DVD-ROM_mount_point/DISK1/HBA/Linux/hbaar <RETURN> |
Nullifying Firewall Settings for Ports to be used by Resource Orchestrator
When installing Resource Orchestrator on systems with active firewalls, in order to enable correct communication between the manager, agents, and clients, disable the firewall settings for the port numbers to be used for communication.
For the port numbers used by Resource Orchestrator and required software, refer to "Appendix A Port List" in the "Design Guide CE".
However, when port numbers have been changed by editing the services file during installation of Resource Orchestrator, replace the default port numbers listed in "Appendix A Port List" in the "Design Guide CE" with the port numbers changed to during installation.
