2.2 Command-related Messages

CFMGC00001 You do not have the privileges required to execute this command.

Message Type

ERROR

Event Log

Yes

Description

You do not have the privileges required to execute this command.

Corrective Action

Execute the command as a user with administrator privileges.

CFMGC00002 An environment for Systemwalker Software Configuration Manager has not been created.

Message Type

ERROR

Event Log

Yes

Description

An environment for Systemwalker Software Configuration Manager has not been created.

Corrective Action

Systemwalker Software Configuration Manager has not been set up. Perform the setup or, if it is underway, wait for it to finish and then execute the command again.

CFMGC00003 Processing cannot be executed because another command is executing.

Message Type

ERROR

Event Log

Yes

Description

Processing cannot be executed because another command is executing.

Corrective Action

Wait until the command finishes, and then execute it again.

CFMGC00004 The specified command options are invalid.
USAGE :swcfmg_retry_sendmail [-f <Output file path>]

Message Type

ERROR

Event Log

Yes

Description

The specified command options are invalid.

Corrective Action

Enter the command correctly.

CFMGC00007 The file cannot be opened. File path={0}

Message Type

ERROR

Event Log

Description

The file cannot be opened.

Parameter

{0}: File path

Corrective Action

Check the file at the path displayed.

CFMGC00011 An error has occurred with the startup processing.

Message Type

ERROR

Event Log

Description

An error has occurred with the startup processing.

Corrective Action

Contact Fujitsu technical support.

CFMGC00016 An error has occurred with the stop processing.

Message Type

ERROR

Event Log

Description

An error has occurred with the stop processing.

Corrective Action

Contact Fujitsu technical support.

CFMGC00020 Systemwalker Software Configuration Manager has not been set up.

Message Type

ERROR

Event Log

Yes

Description

Systemwalker Software Configuration Manager has not been set up.

Corrective Action

Systemwalker Software Configuration Manager has not been set up. Perform the setup or, if it is underway, wait for it to finish and then execute the command again.

CFMGC00021 Systemwalker Software Configuration Manager is not running.

Message Type

INFO or ERROR

Event Log

Yes

Description

Systemwalker Software Configuration Manager is not running.

Corrective Action

If the Status Display Command (swcfmg_status) has been executed, no action is required.

If this message is displayed with a command other than the Status Display Command, execute the Start Command (swcfmg_start) to start Systemwalker Software Configuration Manager.

CFMGC00025 The specified output destination path is incorrect.

Message Type

ERROR

Event Log

Description

The specified output destination path is incorrect.

Corrective Action

Either create the output path or review the privileges.

When specifying the output path that includes the current directory, specify the current directory as ".\" in Windows or "./" in Linux.

CFMGC00026 The specified output destination path already contains files or directories.

Message Type

ERROR

Event Log

Description

The specified output destination path already contains files or directories.

Corrective Action

Delete the file or directory at the output path.

CFMGC00027 The specified output destination path is not writable.

Message Type

ERROR

Event Log

Description

The specified output destination path is not writable.

Corrective Action

Change the privileges for the output path.

CFMGC00028 An error has occurred during product information collection.
Creating a directory has failed.

Message Type

ERROR

Event Log

Description

An error has occurred during product information collection.
Creating a directory has failed.

Corrective Action

Check the disk capacity and the write privileges for the output path.

If the user does not have write privileges, change the privileges. If there is not enough free space, delete any unnecessary files before executing the command again.

If the problem persists, contact Fujitsu technical support.

CFMGC00029 An error has occurred during log information collection.
Creating a directory failed.

Message Type

ERROR

Event Log

Description

An error has occurred during log information collection.

Creating a directory failed.

Corrective Action

Check the disk capacity and the write privileges for the output path.

If the user does not have write privileges, change the privileges. If there is not enough free space, delete any unnecessary files before executing the command again.

If the problem persists, contact Fujitsu technical support.

CFMGC00031 There is not enough free space at the specified output destination path.

Message Type

ERROR

Event Log

Description

There is not enough free space at the specified output destination path.

Corrective Action

Delete any unnecessary files, and then try again.

CFMGC00034 An error has been detected while information about the execution infrastructure was being collected.

Message Type

ERROR

Event Log

Description

An error has been detected while information about the execution infrastructure was being collected.

Corrective Action

Check the disk capacity for the output path. If there is not enough free space, delete any unnecessary files and then execute the command again.

If the problem persists, contact Fujitsu technical support.

CFMGC00035 An error has been detected during product information collection.

Message Type

ERROR

Event Log

Description

An error has been detected during product information collection.

Corrective Action

Check the disk capacity for the output path. If there is not enough free space, delete any unnecessary files and then execute the command again.

If the problem persists, contact Fujitsu technical support.

CFMGC00038 An error has been detected during log information collection.

Message Type

ERROR

Event Log

Description

An error has been detected during log information collection.

Corrective Action

Check the disk capacity for the output path. If there is not enough free space, delete any unnecessary files and then execute the command again.

If the problem persists, contact Fujitsu technical support.

CFMGC00050 An error has occurred with the backup processing.

Message Type

ERROR

Event Log

Description

An error has occurred with the backup processing.

Corrective Action

Check the disk capacity for the output path. If there is not enough free space, delete any unnecessary files and then execute the command again.

If the problem persists, contact Fujitsu technical support.

CFMGC00051 An error has occurred with the restoration processing.

Message Type

ERROR

Event Log

Description

An error has occurred with the restoration processing.

Corrective Action

Check the disk capacity for the output path. If there is not enough free space, delete any unnecessary files and then execute the command again.

If the problem persists, contact Fujitsu technical support.

CFMGC00052 The retry folder does not exist. Folder path={0}

Message Type

ERROR

Event Log

Description

The retry folder does not exist.

Parameter

{0}: Folder path

Corrective Action

Check the settings in the email transmission configuration file.

CFMGC00053 The failure folder does not exist. Folder path={0}

Message Type

ERROR

Event Log

Description

The failure folder does not exist.

Parameter

{0}: Folder path

Corrective Action

Check the settings in the email transmission configuration file.

CFMGC00057 Failed to move the files. Source={0} Destination={1}

Message Type

ERROR

Event Log

Description

Failed to move the files.

Parameter

{0}: Path to the file to move from

{1}: Path to the file to move to

Corrective Action

Contact Fujitsu technical support.

CFMGC00062 The process of resending an email has failed.

Message Type

ERROR

Event Log

Description

The process of resending an email has failed.

Corrective Action

Contact Fujitsu technical support.

CFMGC00064 An error has occurred during the collection of investigation data for Systemwalker Software Configuration Manager.

Message Type

ERROR

Event Log

Description

An error has occurred during the collection of investigation data for Systemwalker Software Configuration Manager.

Corrective Action

Check the disk capacity for the output path. If there is not enough free space, delete any unnecessary files and then execute the command again.

If the problem persists, contact Fujitsu technical support.

CFMGC00072 The disk has run out of free space during the restoration processing.

Message Type

ERROR

Event Log

Description

The disk has run out of free space during the restoration processing.

Corrective Action

Delete any unnecessary files and then try again.

CFMGC00079 Failed to move some files.

Message Type

WARNING

Event Log

Description

Failed to move some files.

Corrective Action

If this problem occurs frequently, contact Fujitsu technical support.

CFMGC00080 A system error has occurred.

Message Type

ERROR

Event Log

Description

A system error has occurred.

Corrective Action

Contact Fujitsu technical support.

CFMGC00081 Failed to copy the files.

Message Type

ERROR

Event Log

Description

Failed to copy the files.

Corrective Action

Check the disk capacity for the output path. If there is not enough free space, delete any unnecessary files and then execute the command again.

If the problem persists, contact Fujitsu technical support.

CFMGC00082 Failed to copy the file. File={0}

Message Type

ERROR

Event Log

Description

Failed to copy the file.

Parameter

{0}: File

Corrective Action

Check the disk capacity for the output path. If there is not enough free space, delete any unnecessary files and then execute the command again.

If the problem persists, contact Fujitsu technical support.

CFMGC00083 Failed to execute the command.

Message Type

ERROR

Event Log

Description

Failed to execute the command.

Corrective Action

Check the disk capacity for the output path. If there is not enough free space, delete any unnecessary files and then execute the command again.

If the problem persists, contact Fujitsu technical support.

CFMGC00084 Failed to execute the command. Command={0}

Message Type

ERROR

Event Log

Description

Failed to execute the command.

Parameter

{0}: Command

Corrective Action

Check the disk capacity for the output path. If there is not enough free space, delete any unnecessary files and then execute the command again.

If the problem persists, contact Fujitsu technical support.

CFMGC00085 The specified path to the folder containing backup data is incorrect.

Message Type

ERROR

Event Log

Description

The specified path to the folder containing backup data is incorrect.

Corrective Action

Specify an existing path as the folder containing backup data.

CFMGC00086 The specified path to the folder for backup data does not contain files or directories.

Message Type

ERROR

Event Log

Description

The specified path to the folder for backup data does not contain files or directories.

Corrective Action

Specify the path to the files obtained by the backup command as the folder containing backup data.

CFMGC00087 The specified path to the folder containing backup data is not readable.

Message Type

ERROR

Event Log

Description

The specified path to the folder containing backup data is not readable.

Corrective Action

Assign read permissions to the backup path.

CFMGC00090 The specified command options are invalid.
USAGE : swcfmg_patch_importrpmpolicy -f <Input file path> [-e <Character encoding for the input file>]

Message Type

ERROR

Event Log

Description

The specified command options are invalid.

Corrective Action

Enter the command correctly.

CFMGC00091 The specified input file path is incorrect.

Message Type

ERROR

Event Log

Description

The specified input file path is incorrect.

Corrective Action

Specify an existing path for the input file.

CFMGC00092 The specified character encoding is incorrect.

Message Type

ERROR

Event Log

Description

The specified character encoding is incorrect.

Corrective Action

Specify the correct character encoding.

CFMGC00093 Failed to read the file.

Message Type

ERROR

Event Log

Description

Failed to read the file.

Corrective Action

Contact Fujitsu technical support.

CFMGC00094 The definition in line {0} is incorrect. (Cause: {1})

Message Type

ERROR

Event Log

Description

The definition in line {0} is incorrect.

Parameter

{0}: Line number

{1}: Cause

Corrective Action

The syntax of the line indicated in the input file is incorrect.

Take one of the following actions, depending on the cause of the problem.

For "Number of elements", review the number of elements in the line indicated.
For "Rpm-name required.", specify the value of rpm-name in the line indicated.
For "Rpm-version required in case rpm-release is defined.", specify the value of rpm-version in the line indicated.

CFMGC00095 The following definition has been disabled by a priority judgment.

Message Type

WARNING

Event Log

Description

The following definition has been disabled by a priority judgment.

Corrective Action

Check the data.

CFMGC00096 Failed to write the Linux patch management target configuration file.

Message Type

ERROR

Event Log

Description

Failed to write the Linux patch management target configuration file.

Corrective Action

Check the disk capacity and the write privileges for the output path directory.

If the user does not have write privileges, change the privileges. If there is not enough free space, delete any unnecessary files before executing the command again.

If the problem persists, contact Fujitsu technical support.

CFMGC00097 The specified command options are invalid.
USAGE : swcfmg_patch_exportrpmpolicy [-back] [-f <Output file path>] [-e <Character encoding for the output file>]

Message Type

ERROR

Event Log

Description

The specified command options are invalid.

Corrective Action

Enter the command correctly.

CFMGC00098 Failed to write the file.

Message Type

ERROR

Event Log

Description

Failed to write to the file.

Corrective Action

Contact Fujitsu technical support.

CFMGC00111 The specified command options are invalid.
USAGE : swcfmg_uam_update -f <Path to the update application management registry configuration file>

Message Type

ERROR

Event Log

Corrective Action

Enter the command correctly.

CFMGC00112 The specified registration file path is incorrect.

Message Type

ERROR

Event Log

Description

The specified registration file path is incorrect.

Corrective Action

Specify the path to an existing registration file.

CFMGC00113 The specified update application management registry configuration file is incorrect.

Message Type

ERROR

Event Log

Description

The specified update application management registry configuration file is incorrect.

Corrective Action

Specify the correct update application management registry configuration file.

Do not change the name of the update application management registry configuration file that has been downloaded from the UpdateSite.

When specifying the path of update application management registry configuration file that includes the current directory, specify the current directory as ".\" in Windows or "./" in Linux.

CFMGC00114 The UpdateAdvisor asset registration processing has failed.

Message Type

ERROR

Event Log

Description

The UpdateAdvisor asset registration processing has failed.

Corrective Action

The UpdateAdvisor asset registration processing has failed. The failure could have been caused by exclusive control, so execute the processing again. If it fails again, contact Fujitsu technical support.

CFMGC00115 The specified command options are invalid.
USAGE : swcfmg_fjmwpatch_update -f <Path to the released patches storage directory>

Message Type

ERROR

Event Log

Description

The specified command options are invalid.

Corrective Action

Enter the command correctly.

CFMGC00116 The specified input directory path is incorrect.

Message Type

ERROR

Event Log

Description

The specified input directory path is incorrect.

Corrective Action

Specify the path to an existing directory.

CFMGC00117 There is no information about released patches for Fujitsu middleware.

Message Type

ERROR

Event Log

Description

There is no information about released patches for Fujitsu middleware.

Corrective Action

Specify the correct path to the released patches storage directory as a command option.

CFMGC00118 Registering released patches for Fujitsu middleware has failed.

Message Type

ERROR

Event Log

Description

Registering released patches for Fujitsu middleware has failed.

Corrective Action

The processing that registers released patches for Fujitsu middleware has failed. The failure could have been caused by exclusive control, so execute the processing again. If it fails again, contact Fujitsu technical support.

CFMGC00119 The specified command options are invalid.
USAGE : swcfmg_fjmwpatch_getinfo -o <Path to the patch management information storage folder>

Message Type

ERROR

Event Log

Description

The specified command options are invalid.

Corrective Action

Enter the command correctly.

CFMGC00120 The processing that gets patch management information has failed.

Message Type

ERROR

Event Log

Description

The processing that gets patch management information has failed.

Corrective Action

The processing that gets patch management information has failed. The failure could have been caused by either insufficient disk space at the output destination or exclusive control. Check the disk capacity at the output destination and then execute the processing again. If it fails again, contact Fujitsu technical support.

CFMGC00121 Systemwalker Software Configuration Manager Management Console will start.

Message Type

INFO

Event Log

Description

The Systemwalker Software Configuration Manager management console will start.

Corrective Action

No action is required.

CFMGC00122 Systemwalker Software Configuration Manager Management Console will stop.

Message Type

INFO

Event Log

Description

The Systemwalker Software Configuration Manager management console will stop.

Corrective Action

No action is required.

CFMGC00123 Systemwalker File Transfer Library Control (SWCFMG) will start.

Message Type

INFO

Event Log

Description

Startup processing for the file transfer infrastructure will start.

Corrective Action

No action is required.

CFMGC00124 Systemwalker File Transfer Library Control (SWCFMG) will stop.

Message Type

INFO

Event Log

Description

Stop processing for the file transfer infrastructure will start.

Corrective Action

No action is required.

CFMGC00125 The following update numbers have been unregistered:

Message Type

WARNING

Event Log

Description

The following update numbers have been unregistered:

Corrective Action

Execute the released patch acquisition tool and this command again. If this problem still occurs, contact Fujitsu technical support.

CFMGC00126 Unable to send an email to [user:{0}]. [Details:{1}]

Message Type

ERROR

Event Log

Description

Unable to send an email to the user.

Parameter

{0}: User ID

{1}: Message ID for the email transmission function

Corrective Action

The message ID (CFMGMxxxxx) for the email transmission function will be output in the message details. Take the appropriate action based on this message ID.

CFMGC00127 The disk has run out of space.

Message Type

ERROR

Event Log

Description

The disk has run out of space.

Corrective Action

Resolve the lack of disk space for the media library according to the procedure in "Moving the Media Library" in the Operation Guide.

CFMGC00135 The specified command options are invalid.
USAGE : swcfmg_define_serverinfo [-import <path of the input file> [-e <character encoding of the input file>] [-t] | -export <path of the output file> [-e <character encoding of the output file>] | -delete <IP address>]

Message Type

ERROR

Event Log

Description

The specified command options are invalid.

Corrective Action

Enter the command correctly.

CFMGC00136 The information in line {0} is incorrect. (Cause: [{1}])

Message Type

ERROR

Event Log

Description

The information is incorrect.

Parameter

{0}: Line number

{1}: Cause

Corrective Action

The syntax of the given line is incorrect in the input file.

Review the file, depending on the cause of the problem.

CFMGC00137 Failed to write to the managed server information configuration file.

Message Type

ERROR

Event Log

Description

Failed to write to the managed server information configuration file.

Corrective Action

Check the permission for the managed server information configuration file storage directory, and the disk capacity.

CFMGC00138 Failed to delete the managed server information. (Cause: {0})

Message Type

ERROR

Event Log

Description

Failed to delete the managed server information.

Parameter

{0}: Cause

Corrective Action

The managed server information could not be deleted.

CFMGC00142 Unable to communicate ({0}).

Message Type

ERROR

Event Log

Description

Unable to communicate.

Parameter

{0}: IP address

Corrective Action

Check whether the Systemwalker Software Configuration Manager agent has been installed correctly.
This function cannot be used for an earlier version of the agent. Check the version of the installed agent.
Check whether the admin server and managed server are connected.
This message displays the IP address of the managed server. Check whether the admin server can connect to the given IP address.
Review the firewall settings of the admin server and the managed server.
To communicate with the managed server, port 9764 for the file transfer infrastructure must be open.
Restart Systemwalker Software Configuration Manager.
Refer to "Starting and Stopping Systemwalker Software Configuration Manager" in the Systemwalker Software Configuration Manager Operation Guide for information on how to start Systemwalker Software Configuration Manager.
If the cause of the problem is other than the above, contact Fujitsu technical support.

CFMGC00143 Failed to transfer the collected information ({0}).

Message Type

ERROR

Event Log

Description

Failed to transfer the collected information.

Parameter

{0}: IP address

Corrective Action

Check whether the Systemwalker Software Configuration Manager agent has been installed correctly.
Check whether the admin server and managed server are connected.
This message displays the IP address of the managed server. Check whether the admin server can connect to the given IP address.
Review the firewall settings of the admin server and the managed server.
To communicate with the managed server, port 9764 for the file transfer infrastructure must be open.
Restart Systemwalker Software Configuration Manager.
Refer to "Starting and Stopping Systemwalker Software Configuration Manager" in the Systemwalker Software Configuration Manager Operation Guide for information on how to start Systemwalker Software Configuration Manager.
If the cause of the problem is other than the above, contact Fujitsu technical support.

CFMGC00144 Failed to receive the basic information ({0}).

Message Type

ERROR

Event Log

Description

Failed to receive the basic information.

Parameter

{0}: IP address

Corrective Action

Check whether Systemwalker Software Configuration Manager has been installed correctly.

CFMGC00145 Failed to receive the platform information ({0}).

Message Type

ERROR

Event Log

Description

Failed to receive the platform information.

Parameter

{0}: IP address

Corrective Action

Check whether it is a WSUS managed server.

CFMGC00146 Failed to register the collected information ({0}).

Message Type

ERROR

Event Log

Description

Failed to register the collected information.

Parameter

{0}: IP address

Corrective Action

Contact Fujitsu technical support.

CFMGC00147 A system error has occurred ({0}).

Message Type

ERROR

Event Log

Description

A system error has occurred.

Parameter

{0}: IP address

Corrective Action

Contact Fujitsu technical support.

CFMGC00148 An error has occurred while searching CMDB.

Message Type

ERROR

Event Log

Description

An error has occurred while searching CMDB.

Corrective Action

Contact Fujitsu technical support.

CFMGC00149 An error has occurred while registering CMDB.

Message Type

ERROR

Event Log

Description

An error has occurred while registering CMDB.

Corrective Action

Contact Fujitsu technical support.

CFMGC00150 An error has occurred while deleting CMDB.

Message Type

ERROR

Event Log

Description

An error has occurred while deleting CMDB.

Corrective Action

Contact Fujitsu technical support.

CFMGC00151 Failed to delete the platform information.

Message Type

INFO

Event Log

Description

Failed to delete the platform information.

Corrective Action

No action is required.

CFMGC00152 This is not the managed server managed by Systemwalker Software Configuration Manager ({0}).

Message Type

ERROR

Event Log

Description

The given IP address does not belong to the managed server managed by Systemwalker Software Configuration Manager.

Parameter

{0}: IP address

Corrective Action

Run the command by specifying the IP address of the managed server managed by Systemwalker Software Configuration Manager.

CFMGC00153 An error has occurred while connecting to CMDB.

Message Type

ERROR

Event Log

Description

An error has occurred while connecting to CMDB.

Corrective Action

Restart Systemwalker Software Configuration Manager.
If the problem is not resolved after restarting, and if linked to ServerView Resource Orchestrator, restart the OS.
If the cause of the problem is other than the above, contact Fujitsu technical support.

CFMGC00154 Failed to receive the user information.

Message Type

ERROR

Event Log

Description

Failed to receive the user information.

Corrective Action

Ensure the service for ServerView Operations Manager is running.
If linked to ServerView Resource Orchestrator, ensure the service for ServerView Resource Orchestrator is running.
If this message is output after executing swcfmg_define_serverinfo (Managed Server Information Definition Command), check whether the owner specified in the managed server information configuration file has one of the following permissions:
- Tenant-name (tenant) administrator specified in the managed server information configuration file
- Tenant-name (tenant) user specified in the managed server information configuration file
- Dual-role administrator
Specify tenant-name (tenant) administrator or user, or dual-role administrator for the owner.
If the cause of the problem is other than the above, contact Fujitsu technical support.

CFMGC00155 Some managed server information could not be output.

Message Type

ERROR

Event Log

Description

Some managed server information could not be output.

Corrective Action

Contact Fujitsu technical support.

CFMGC00156 There are multiple instances of server information with the same client ID. (Client ID={0}, Server={1})

Message Type

ERROR

Event Log

Description

There are multiple instances of server information with the same client ID.

Parameter

{0}: Client ID

{1}: List of IP addresses

Corrective Action

Delete unnecessary servers using the "delete" command, which is included in the Managed Server Information Definition Command.

CFMGC00157 The file settings are invalid. ({0})

Message Type

ERROR

Event Log

Description

The file settings are invalid.

Parameter

{0}: File name

Corrective Action

Check the given file at the displayed path.

CFMGC00158 The connection test failed.

Message Type

ERROR

Event Log

Description

The connection test failed.

Corrective Action

Specify the IP address of the relevant managed server managed by Systemwalker Software Configuration Manager.

If the cause of the problem is other than the above, contact Fujitsu technical support.

CFMGC00159 An error has occurred with the startup processing from being stopped.

Message Type

ERROR

Event Log

Description

All functions have been stopped in order to start Systemwalker Software Configuration Manager. An error has occurred when stopping all of the functions.

Corrective Action

Execute the stop command, and then execute the startup command again.

CFMGC00160 Failed to register the automated operation process file. [Details:{0}]

Message Type

ERROR

Event Log

Description

Failed to register the automated operation process file with Systemwalker Software Configuration Manager.

Parameter

{0}: Details

Corrective Action

Check whether Systemwalker Software Configuration Manager can be started successfully. Execute the restore command again.

CFMGC00221 The disk has run out of space in the media library.

Message Type

ERROR

Event Log

Description

The disk has run out of space in the media library.

Corrective Action

Resolve the lack of disk space for the media library according to the procedure in "Moving the Media Library" in the Operation Guide.

CFMGC10001 The parameter is illegal. param={0}

Message Type

ERROR

Event Log

Description

The parameter is illegal.

Parameter

{0}: Item number for the invalid parameter

Corrective Action

Parameter {0} is incorrect. Review the specified parameters and then execute the command again.

CFMGC10002 An indispensable parameter is not specified. param={0}

Message Type

ERROR

Event Log

Description

An indispensable parameter is not specified.

Parameter

{0}: Mandatory parameter

Corrective Action

Specify the mandatory parameter and then execute the command again.

CFMGC10003 Failed to set the value to the registry. key={0}

Message Type

ERROR

Event Log

Description

Failed to set the value to the registry.

Parameter

{0}: Key name

Corrective Action

Check whether the user that executed the command has the privileges required to set up registries. Review the privileges and then try again.

CFMGC20001 The specified file path is incorrect.

Message Type

ERROR

Event Log

Description

The specified file path is incorrect.

Corrective Action

Specify a valid input file path and execute again.

CFMGC20002 The specified output file is not writable.

Message Type

ERROR

Event Log

Description

The specified output file is not writable.

Corrective Action

Change the privileges for the output file.

CFMGC20003 Failed to read the file.

Message Type

ERROR

Event Log

Description

Failed to read the file.

Corrective Action

Ensure that the file is not being operated by other software and that it can be opened.

CFMGC20004 Failed to write to the file.

Message Type

ERROR

Event Log

Description

Failed to write to the file.

Corrective Action

Check the privileges and disk capacity of the file output directory.

CFMGC20005 The file description is incorrect. [Line number:{0}][Cause:{1}]

Message Type

ERROR

Event Log

Description

The file description is incorrect.

Parameter

{0}: Line number

{1}: Cause

Corrective Action

Check the file description details. Revise the error displayed in the message "Cause" and execute again.

CFMGC20101 Starting to register software information.

Message Type

INFO

Event Log

Description

The registration of software information will start.

CFMGC20102 Finished registering software information.

Message Type

INFO

Event Log

Description

The software information has been registered.

CFMGC20103 Starting to update software information.

Message Type

INFO

Event Log

Description

The update of software information will start.

CFMGC20104 Finished updating software information.

Message Type

INFO

Event Log

Description

The software information has been updated.

CFMGC20105 Starting to delete software information.

Message Type

INFO

Event Log

Description

The deletion of software information will start.

CFMGC20106 Finished deleting software information.

Message Type

INFO

Event Log

Description

The software information has been deleted.

CFMGC20107 Starting to output software information.

Message Type

INFO

Event Log

Description

The output of software information will start.

CFMGC20108 Finished the output of software information.

Message Type

INFO

Event Log

Description

The software information has been output.

CFMGC20109 The specified command options are invalid.
USAGE: swcfmg_software
'{ -add [-sourceid <Information collection source ID>] -file <Software information file path> [-e <Character encoding>]|
-update [-sourceid <Information collection source ID>] -file <Software information file path> [-e <Character encoding>] |
-delete -id <software ID>,... |
-list [-sourceid <Information collection source ID>] [-file <Output file path>] [-e <Character encoding>] }

Message Type

ERROR

Event Log

Description

The specified command options are invalid.

Corrective Action

Configure the options correctly, and execute the command.

CFMGC20111 The specified software ID does not exist. [Software ID:{0}]

Message Type

ERROR

Event Log

Description

The specified software ID does not exist.

Parameter

{0}: Software ID

Corrective Action

Ensure that the correct software ID is specified.

CFMGC20112 Unable to delete the specified software information because it is set as installed software information. [Software ID:{0}]

Message Type

ERROR

Event Log

Description

The specified software information is set as installed software information and cannot be deleted.

Parameter

{0}: Software ID

Corrective Action

Delete all installed software information for the target software before deleting the software information.

CFMGC20113 Unable to delete the specified software information. [Software ID:{0}]

Message Type

ERROR

Event Log

Description

The specified software information cannot be deleted.

Parameter

{0}: Software ID

Corrective Action

The specified software ID is software information predefined by this product so cannot be deleted.

CFMGC20121 Starting to register installed software information.

Message Type

INFO

Event Log

Description

The registration of installed software information will start.

CFMGC20122 Finished registering installed software information.

Message Type

INFO

Event Log

Description

The installed software information has been registered.

CFMGC20123 Starting to delete installed software information.

Message Type

INFO

Event Log

Description

The deletion of installed software information will start.

CFMGC20124 Finished deleting installed software information.

Message Type

INFO

Event Log

Description

The installed software information has been deleted.

CFMGC20125 Starting to output installed software information.

Message Type

INFO

Event Log

Description

The output of installed software information will start.

CFMGC20126 Finished outputting installed software information.

Message Type

INFO

Event Log

Description

The installed software information has been output.

CFMGC20127 The specified command options are invalid.
USAGE : swcfmg_installedsoftware
'{ -add -file "<path of the installed software information file>" [-e "<character encoding>"]|
-delete -file "<path of the installed software information file>" [-e "<character encoding>"] |
-list [{-serverid "<server ID>",... | -ip "<IP address>",...}] [ -file "<output file path>"] [-e "<character encoding>"] [-all] '}

Message Type

ERROR

Event Log

Description

The specified command options are invalid.

Corrective Action

Configure the options correctly, and execute the command.

CFMGC20202 The specified command options are invalid.
USAGE : swcfmg_param_settingdef
{ -add -file <parameter settings definition file path> |
-update -id <parameter settings definition id> -file <parameter settings definition file path> |
-delete -id <parameter settings definition id>,... |
-list [-file <output file path>] [-e <character encoding>] |
-get -id <parameter settings definition id> -file <output file path> |
-upload -id <parameter settings definition id> -file <script package file path> |
-download -id <parameter settings definition id> -dir <output directory path> }

Message Type

ERROR

Event Log

Description

The specified command options are invalid.

Corrective Action

Specify options correctly and execute again.

CFMGC20203 The root elements or version attributes of the XML file do not exist.

Message Type

ERROR

Event Log

Description

The root elements or version attributes of the XML file do not exist.

Corrective Action

The specified XML file format is incorrect. Review the details and execute again.

CFMGC20204 The format version specified in the version attributes of the root element is not supported. [Version:{0}]

Message Type

ERROR

Event Log

Description

The format version specified in the version attributes of the root element is not supported.

Parameter

{0}: Version

Corrective Action

The version attributes of the root element in the specified XML file are incorrect. Review the details and execute again.

CFMGC20205 An error occurred during XML file validation. [Details:{0}]

Message Type

ERROR

Event Log

Description

An error occurred during XML file validation.

Parameter

{0}: Details

Corrective Action

Check the description details of the specified XML file. Revise the error displayed in "Details" and execute again.

CFMGC20206 A parameter key is duplicated. [Key:{0}]

Message Type

ERROR

Event Log

Description

A parameter key is duplicated.

Parameter

{0}: Key

Corrective Action

Check the description details of the specified XML file. Revise the duplication of the key displayed in "Key" and execute again.

CFMGC20207 A parameter key does not conform to the rules [Key:{0}]

Message Type

ERROR

Event Log

Description

A parameter key does not conform to the rules.

Parameter

{0}: Key

Corrective Action

Check the description details of the specified XML file. Revise the key displayed in "Key" so that it conforms to the rules and execute again.

CFMGC20208 A parameter value is not valid as a type. [Key:{0} Type:{1} Value:{2}]

Message Type

ERROR

Event Log

Description

A parameter value is not valid as a type.

Parameter

{0}: Key

{1}: Type

{2}: Value

Corrective Action

Check the description details of the specified XML file. Revise the type and value of the key displayed in "Key" and execute again.

CFMGC20209 The parameter value is incorrect. [Key:{0} Type:{1} Value:{2}]

Message Type

ERROR

Event Log

Description

The parameter value is incorrect.

Parameter

{0}: Key

{1}: Type

{2}: Value

Corrective Action

Check the description details of the specified XML file. Revise the value of the key displayed in "Key" and execute again.

CFMGC20210 The key name cannot be changed because the parameter key is being used in the predefined parameters. [Key:{0}]

Message Type

ERROR

Event Log

Description

The key name cannot be changed because the parameter key is being used in the predefined parameters.

Parameter

{0}: Key

Corrective Action

Check the description details of the specified XML file. Revise the key displayed in "Key" and execute again.

CFMGC20211 The parameter type cannot be changed because it will cause parameter values in the predefined parameters to become invalid. [Parameter information ID:{0} Key:{1} Type:{2} Value:{3}]

Message Type

ERROR

Event Log

Description

The parameter type cannot be changed because it will cause parameter values in the predefined parameters to become invalid.

Parameter

{0}: Parameter information

{1}: Key

{2}: Type

{3}: Value

Corrective Action

Check the description details of the specified XML file. Revise the type displayed in "Key" and execute again.

CFMGC20212 The package file extension is incorrect.

Message Type

ERROR

Event Log

Description

The package file extension is incorrect.

Corrective Action

Check the extension of the specified package file. Revise and execute again.

CFMGC20213 The package file size has exceeded the upper limit.

Message Type

ERROR

Event Log

Description

The package file size has exceeded the upper limit.

Corrective Action

Check the size of the specified package file. Revise and execute again.

CFMGC20214 The package file format is incorrect.

Message Type

ERROR

Event Log

Description

The package file format is incorrect.

Corrective Action

Check whether the specified package file is in ZIP format and whether the file content is correct. Revise and execute again.

CFMGC20215 The specified ID does not exist. [ID:{0}]

Message Type

ERROR

Event Log

Description

The specified ID does not exist.

Parameter

{0}: ID

Corrective Action

The specified definition ID does not exist. Specify an existing definition ID and execute again.

CFMGC20216 The specified ID is already predefined in the product. [ID:{0}]

Message Type

ERROR

Event Log

Description

The specified ID is already predefined in the product.

Parameter

{0}: ID

Corrective Action

The specified ID is already predefined in the product. Therefore, it cannot be updated or deleted.

CFMGC20217 The specified ID does not have a registered package. [ID:{0}]

Message Type

ERROR

Event Log

Description

The specified ID does not have a registered package.

Parameter

{0}: ID

Corrective Action

The specified definition ID does not have a registered package. Specify a definition ID with a registered package and execute again.

CFMGC20218 The specified ID does not have a correctly registered package. [ID:{0}]

Message Type

ERROR

Event Log

Description

The specified ID does not have a correctly registered package.

Parameter

{0}: ID

Corrective Action

The specified definition ID does not have a correctly registered package. Upload a package.

CFMGC20219 The specified parameter settings definition is associated with the predefined parameters and cannot be deleted.

Message Type

ERROR

Event Log

Description

The specified parameter settings definition is associated with the predefined parameters and cannot be deleted.

Corrective Action

To delete the parameter settings definition, first delete all associated predefined parameters and then execute.

CFMGC20220 Failed to copy to the temporary directory. [Path:{0}]

Message Type

ERROR

Event Log

Description

Failed to copy to the temporary directory.

Parameter

{0}: Path

Corrective Action

Failed to copy to the temporary directory. Check the disk size in "Path".

CFMGC20221 The disk has run out of space in the media library.

Message Type

ERROR

Event Log

Description

The disk has run out of space in the media library.

Corrective Action

Resolve the lack of disk space for the media library according to the procedure in "Moving the Media Library" in the Operation Guide.

CFMGC20222 A system error has occurred in CMDB. [ID:{0} Message:{1}]

Message Type

ERROR

Event Log

Description

A system error has occurred in CMDB.

Parameter

{0}: Message

Corrective Action

Ensure that Systemwalker Software Configuration Manager is running. Refer to "Starting and Stopping Systemwalker Software Configuration Manager" in the "Operation Guide" for information on how to start Systemwalker Software Configuration Manager.
If the cause of the problem is something other than the above, contact Fujitsu technical support.

CFMGC20223 A system error has occurred in the media library. [Return value:{0}]

Message Type

ERROR

Event Log

Description

A system error has occurred in the media library.

Parameter

{0}: Return value

Corrective Action

When the return code is 255, an inconsistency may have occurred in the media library. Stop Systemwalker Software Configuration Manager, then restart it and perform the operation again. If the problem persists after taking the corrective action above, contact Fujitsu technical support.
If the cause of the problem is something other than the above, contact Fujitsu technical support.

CFMGC20224 The specified ID is not predefined in the product. [ID:{0}]

Message Type

ERROR

Event Log

Description

The specified ID is not predefined in the product.

Parameter

{0}: ID

Corrective Action

The specified definition ID is not predefined in the product. It cannot be updated or deleted by specifying the -force option.

CFMGC20225 Failed to move the files from the temporary directory. [Path:{0}]

Message Type

ERROR

Event Log

Description

Failed to move the files from the temporary directory.

Parameter

{0}: Path

Corrective Action

Failed to move the files from the temporary directory. Check the privileges and disk size in "Path".

CFMGC20226 The method cannot be changed if the software and a parameter definition are associated or a script package is registered.

Message Type

ERROR

Event Log

Description

The method cannot be changed if the software and a parameter definition are associated or a script package is registered.

Corrective Action

The method cannot be changed if the software and a parameter definition are associated or a script package is registered. Check if the contents of the file are correct. If not, correct the file and then execute it.

CFMGC20227 You cannot specify a duplicate key if multiple parameter collection definitions are associated with the software. [Software ID:{0} Parameter collection definition ID:{1}]

Message Type

ERROR

Event Log

Description

You cannot specify a duplicate key if multiple parameter collection definitions are associated with the software.

Parameter

{0}: ID of the software associated with the parameter collection definition that has a duplicate key

{1}: ID of the parameter collection definition (not associated) for which a duplicate key exists

Corrective Action

You cannot specify a duplicate key if multiple parameter collection definitions are associated with the software. Check if the parameter collection definition is correct. If not, correct it and then execute it.

CFMGC20252 The specified command options are invalid.
USAGE : swcfmg_param_collectingdef
{ -add -file <parameter collection definition file path> |
-update -id <parameter collection definition id> -file <parameter collection definition file path> |
-delete -id <parameter collection definition id>,... |
-list [-file <output file path>] [-e <character encoding>] |
-get -id <parameter collection definition id> -file <output file path> |
-upload -id <parameter collection definition id> -file <script package file path> |
-download -id <parameter collection definition id> -dir <output directory path> }

Message Type

ERROR

Event Log

Description

The specified command options are invalid.

Corrective Action

Specify options correctly and execute again.

CFMGC20302 The specified command options are invalid.
USAGE : swcfmg_param_defassoc.{ -attach -softid <software id> -sdefid <parameter settings definition id> |
-attach -softid <software id> -cdefid <parameter collection definition id> |
-detach -softid <software id> -sdefid <parameter settings definition id> |
-detach -softid <software id> -cdefid <parameter collection definition id> |
-list [-sdef] [-cdef] [-file <output file path>] [-e <character encoding>] }

Message Type

ERROR

Event Log

Description

The specified command options are invalid.

Corrective Action

Specify options correctly and execute again.

CFMGC20303 The specified software is associated with a different parameter definition.

Message Type

ERROR

Event Log

Description

The specified software is associated with a different parameter definition.

Corrective Action

The specified software ID is associated with a different definition ID. Check the specified ID.

CFMGC20304 The parameter definition format is not compatible with the OS type of the software.

Message Type

ERROR

Event Log

Description

The parameter definition format is not compatible with the OS type of the software.

Corrective Action

The parameter definition format is not compatible with the OS type of the software. Check the specified ID.

CFMGC20305 The software is not associated with the parameter definition.

Message Type

ERROR

Event Log

Description

The software is not associated with the parameter definition.

Corrective Action

The specified software ID is not associated with the definition ID. Check the specified ID.

CFMGC20306 The software is already associated with the parameter definition.

Message Type

ERROR

Event Log

Description

The software is already associated with the parameter definition.

Corrective Action

The specified software ID is already associated with the definition ID.

CFMGC20307 You cannot specify a duplicate key if multiple parameter collection definitions are associated with the software. [Software ID:{0} Parameter collection definition ID:{1}]

Message Type

ERROR

Event Log

Description

You cannot specify a duplicate key if multiple parameter collection definitions are associated with the software.

Parameter

{0}: ID of the software associated with the parameter collection definition that has a duplicate key

{1}: ID of the parameter collection definition (not associated) for which a duplicate key exists

Corrective Action

You cannot specify a duplicate key if multiple parameter collection definitions are associated with the software. Check if the associated parameter collection definition is correct. If not, correct it and then execute it.

CFMGC20352 The specified command options are invalid.
USAGE : swcfmg_param_predef
{ -add -sdefid <parameter settings definition id> -file <parameter information csv file path> [-e <character encoding>] |
-add -sdefid <parameter settings definition id> -xml <parameter information xml file path> |
-update -id <parameter information id> -file <parameter information csv file path> [-e <character encoding>] |
-update -id <parameter information id> -xml <parameter information xml file path> |
-delete -id <parameter information id>,... |
-list [-sdefid <parameter settings definition id>] [-file <output file path>] [-e <character encoding>] |
-get -id <parameter information id> -file <output file path> [-e <character encoding>] |
-get -id <parameter information id> -xml <output file path> |
-upload -id <parameter information id> -file <parameter package file path> |
-download -id <parameter information id> -dir <output directory path> }

Message Type

ERROR

Event Log

Description

The specified command options are invalid.

Corrective Action

Specify options correctly and execute again.

CFMGC20353 A key that does not exist in the parameter settings definition has been specified. [Key:{0}]

Message Type

ERROR

Event Log

Description

A key that does not exist in the parameter settings definition has been specified.

Corrective Action

Check the description details of the specified XML file. Revise the key displayed in "Key" to one that exists in the parameter settings definition and execute again.

CFMGC20402 The specified command options are invalid.
USAGE : swcfmg_param_export{ -csv { -serverid "<server ID>" | -ip "<IP address>" } [-snap "<snapshot name>"] -file "<output file path>" [-e "<character encoding>"] |
-csv { -serverid "<server ID>" | -ip "<IP address>" } -softid "software ID" [-snap "<snapshot name>"] -file "<output file path>" [-e "<character encoding>"] |
-pkg { -serverid "<server ID>" | -ip "<IP address>" } [-snap "<snapshot name>"] -dir "<output directory path>" |
-pkg { -serverid "<server ID>" | -ip "<IP address>" } -softid "<software ID>" [-snap "<snapshot name>"] -dir "<output directory path>" }

Message Type

ERROR

Event Log

Description

The specified command options are invalid.

Corrective Action

Specify options correctly and execute again.

CFMGC20403 The specified snapshot does not exist.

Message Type

ERROR

Event Log

Description

The specified snapshot does not exist.

Corrective Action

The specified snapshot does not exist. Specify an existing snapshot name and execute again.

CFMGC20404 Systemwalker Software Configuration Manager DataBase Service(SWCFMGDB) will start.

Message Type

INFO

Event Log

Description

Startup processing for Systemwalker Software Configuration Manager DataBase Service (SWCFMGDB) will start.

Corrective Action

No action is required.

CFMGC20405 Systemwalker Software Configuration Manager DataBase Service(SWCFMGDB) will stop.

Message Type

INFO

Event Log

Description

Stop processing for Systemwalker Software Configuration Manager DataBase Service (SWCFMGDB) will start.

Corrective Action

No action is required.

CFMGC20406 Systemwalker Software Configuration Manager Web Server (Apache) will start.

Message Type

INFO

Event Log

Description

Startup processing for Systemwalker Software Configuration Manager Web Server (Apache) will start.

Corrective Action

No action is required.

CFMGC20407 Systemwalker Software Configuration Manager Web Server (Apache) will stop.

Message Type

INFO

Event Log

Description

Stop processing for Systemwalker Software Configuration Manager Web Server (Apache) will start.

Corrective Action

No action is required.

CFMGC20408 Systemwalker Software Configuration Manager Sub Web Server (Mongrel) will start.

Message Type

INFO

Event Log

Description

Startup processing for Systemwalker Software Configuration Manager Sub Web Server (Mongrel) will start.

Corrective Action

No action is required.

CFMGC20409 Systemwalker Software Configuration Manager Sub Web Server (Mongrel) will stop.

Message Type

INFO

Event Log

Description

Stop processing for Systemwalker Software Configuration Manager Sub Web Server (Mongrel) will start.

Corrective Action

No action is required.

CFMGC20410 Systemwalker Software Configuration Manager Sub Web Server (Mongrel2) will start.

Message Type

INFO

Event Log

Description

Startup processing for Systemwalker Software Configuration Manager Sub Web Server (Mongrel2) will start.

Corrective Action

No action is required.

CFMGC20411 Systemwalker Software Configuration Manager Sub Web Server (Mongrel2) will stop.

Message Type

INFO

Event Log

Description

Stop processing for Systemwalker Software Configuration Manager Sub Web Server (Mongrel2) will start.

Corrective Action

No action is required.

CFMGC20412 Systemwalker Software Configuration Manager Application Server will start.

Message Type

INFO

Event Log

Description

Startup processing for Systemwalker Software Configuration Manager Application Server will start.

Corrective Action

No action is required.

CFMGC20413 Systemwalker Software Configuration Manager Application Server will stop.

Message Type

INFO

Event Log

Description

Stop processing for Systemwalker Software Configuration Manager Application Server will start.

Corrective Action

No action is required.

CFMGC20414 Systemwalker Software Configuration Manager CMDB will start.

Message Type

INFO

Event Log

Description

Startup processing for Systemwalker Software Configuration Manager CMDB will start.

Corrective Action

No action is required.

CFMGC20415 Systemwalker Software Configuration Manager CMDB will stop.

Message Type

INFO

Event Log

Description

Stop processing for Systemwalker Software Configuration Manager CMDB will start.

Corrective Action

No action is required.

CFMGC20416 Systemwalker Software Configuration Manager Workflow will start.

Message Type

INFO

Event Log

Description

Startup processing for Systemwalker Software Configuration Manager Workflow will start.

Corrective Action

No action is required.

CFMGC20417 Systemwalker Software Configuration Manager Workflow will stop.

Message Type

INFO

Event Log

Description

Stop processing for Systemwalker Software Configuration Manager Workflow will start.

Corrective Action

No action is required.

CFMGC20418 Systemwalker Software Configuration Manager Runbook Automation will start.

Message Type

INFO

Event Log

Description

Startup processing for Systemwalker Software Configuration Manager Automated Operation Process will start.

Corrective Action

No action is required.

CFMGC20419 Systemwalker Software Configuration Manager Runbook Automation will stop.

Message Type

INFO

Event Log

Description

Stop processing for Systemwalker Software Configuration Manager Automated Operation Process will start.

Corrective Action

No action is required.

CFMGC20452 The specified command options are invalid.
USAGE : swcfmg_param_startsetting -userid <User ID> -ip <IP address> -softid <Software ID>,... -predefid <Parameter information ID>,... [-monitor <Monitoring period>] [-prescript <Pre-execution script file path>] [-postscript <Post-execution file path>] [-reboot] [-force] [-wait]

Message Type

ERROR

Event Log

Description

The specified command options are invalid.

Corrective Action

Configure the options correctly, and then execute the command.

CFMGC20453 The specified software is not set as the installed software. [Server ID:{0}][IP address:{1}][Software ID:{2}]

Message Type

ERROR

Event Log

Description

The specified software is not set as the installed software.

Parameter

{0}: Server ID

{1}: IP address

{2}: Software ID

Corrective Action

The indicated software is not set as the installed software. Specify the software that has been set as the installed software.

CFMGC20454 The specified predefined parameter cannot be used. [Software ID:{0}][Parameter information ID:{1}]

Message Type

ERROR

Event Log

Description

The specified predefined parameter cannot be used.

Parameter

{0}: Software ID

{1}: Parameter information ID of the predefined parameter

Corrective Action

Check if the parameter setting definition associated with the indicated predefined parameter is associated with the indicated software.

You can check parameter setting definitions associated with predefined parameters in the list displayed by swcfmg_param_predef (predefined parameter management command). View the list displayed by swcfmg_param_settingdef (parameter setting definition management command) to check if the parameter setting definition and the software are associated.

CFMGC20455 The script package is not registered. [Parameter information ID:{0}]

Message Type

ERROR

Event Log

Description

The script package is not registered.

Parameter

{0}: Parameter information ID of the predefined parameter

Corrective Action

The script package is not registered in the parameter setting definition associated with the indicated predefined parameter.

Check the parameter setting definitions associated with predefined parameters in the list displayed by swcfmg_param_predef (predefined parameter management command).

CFMGC20456 You do not have the privileges required to set parameters. [User ID:{0}][Server ID:{1}][IP address:{2}]

Message Type

ERROR

Event Log

Description

You do not have the privileges required to set parameters.

Parameter

{0}: User ID

{1}: Server ID

{2}: IP address

Corrective Action

The indicated user does not have the privileges required to set parameters. Take the following action:

Refer to "Login Users" in the Operator's Guide, and check if the indicated user has the privileges required to set parameters.
If the indicated user is a tenant user, check if the user owns the server group of the indicated server. If the indicated user is a tenant administrator, check if the server group of the indicated server in the managed tenant belongs to the user.

CFMGC20457 The specified script file path is incorrect. [Script file path:{0}]

Message Type

ERROR

Event Log

Description

The specified script file path is incorrect.

Parameter

{0}: Script file path

Corrective Action

Specify an existing file path.

CFMGC20458 The specified script file is incorrect. [Script file:{0}]

Message Type

ERROR

Event Log

Description

The specified script file is incorrect.

Parameter

{0}: Script file

Corrective Action

Ensure that only printable ASCII code characters are used in the script file name.
If the OS type of the server for which the script will be run is "Windows", ensure that the extension of the script file is "bat" or "cmd".

CFMGC20459 A combination with the same IDs is already specified. [Software ID:{0}][Parameter information ID:{1}]

Message Type

ERROR

Event Log

Description

A combination with the same IDs is already specified.

Parameter

{0}: Software ID

{1}: Parameter information ID of the predefined parameter

Corrective Action

The combination of the indicated software and the predefined parameter is specified more than once. Specify a different combination.

CFMGC20460 Operation not permitted for admin server. [Server ID:{0}][IP address:{1}]

Message Type

ERROR

Event Log

Description

The operation is not permitted for the admin server.

Parameter

{0}: Server ID

{1}: IP address

Corrective Action

The indicated server is the admin server. Execute the command for a different server.

CFMGC30002 The specified command is invalid.
USAGE : swcfmg_account
{ -add -file "<user information file>" [-e "<character encoding>"] |
-update -file "<user information file>" [-e "<character encoding>"] |
-move -file "<user information file>" [-e "<character encoding>"] |
-chpasswd -file "<user information file>" [-e "<character encoding>"] |
-delete -id "<user ID>",... |
-list [-file "<output file path>"] [-e "<character encoding>"] [-sort tenant-id | tenant-name] }

Message Type

ERROR

Event Log

Description

The specified command options are invalid.

Corrective Action

Configure the options correctly, and then execute the command.

CFMGC30003 The specified user does not exist. [User ID:{0}]

Message Type

ERROR

Event Log

Description

The specified user does not exist.

Parameter

{0}: User ID

Corrective Action

Check if the indicated user exists on the directory service.
You cannot delete a process control user. Do not specify a process control user.
You cannot delete a user who is not registered using Systemwalker Software Configuration Manager.

CFMGC30004 A server group owned by the specified user exists. [User ID:{0}]

Message Type

ERROR

Event Log

Description

A server group owned by the specified user exists.

Parameter

{0}: User ID

Corrective Action

Delete the server group owned by the indicated user, and then execute the command.

CFMGC30005 The Systemwalker Software Configuration Manager role corresponding to the ServerView Resource Orchestrator role cannot be found. [Role:{0}]

Message Type

ERROR

Event Log

Description

The Systemwalker Software Configuration Manager role corresponding to the ServerView Resource Orchestrator role cannot be found.

Parameter

{0}: Role of ServerView Resource Orchestrator

Corrective Action

Refer to "Login Users" in the Operator's Guide, and check if the indicated ServerView Resource Orchestrator role corresponds to the Systemwalker Software Configuration Manager role.

CFMGC30052 The specified command is invalid.
USAGE : swcfmg_tenant
{ -add -file "<tenant information file>" [-e "<character encoding>"] |
-update -file "<tenant information file>" [-e "<character encoding>"] |
-delete { -id | -name } "<tenant ID>",... |
-list [-file "<output file path>"] [-e "<character encoding>"] }

Message Type

ERROR

Event Log

Description

The specified command options are invalid.

Corrective Action

Configure the options correctly, and then execute the command.

CFMGC30053 The specified tenant does not exist. [Tenant ID:{0}]

Message Type

ERROR

Event Log

Description

The specified tenant does not exist.

Parameter

{0}:Tenant ID

Corrective Action

The indicated tenant does not exist. Specify an existing tenant.
The default tenant cannot be deleted. Specify another tenant.

CFMGC30054 A user or a server group exists in the specified tenant. [Tenant ID:{0}]

Message Type

ERROR

Event Log

Description

A user or a server group exists in the specified tenant.

Parameter

{0}:Tenant ID

Corrective Action

Delete the user or server group belonging to the indicated tenant, and then execute the command.

CFMGC30102 The specified command is invalid.
USAGE : swcfmg_servergroup
{ -add -file "<server group information file>" [-e "<character encoding>"] |
-update -file "<server group information file>" [-e "<character encoding>"] |
-move -file "<server group information file>" [-e "<character encoding>"] |
-delete -id "<server group ID>",... |
-list [-file "<output file path>"] [-e "<character encoding>"] [-sort tenant-id | tenant-name] [-site] [-all] }

Message Type

ERROR

Event Log

Description

The specified command options are invalid.

Corrective Action

Configure the options correctly, and then execute the command.

CFMGC30103 The specified server group does not exist. [Server group ID:{0}]

Message Type

ERROR

Event Log

Description

The specified server group does not exist.

Parameter

{0}: Server group ID

Corrective Action

The indicated server group does not exist. Specify an existing server group.

CFMGC30104 A server exists in the specified server group. [Server group ID:{0}]

Message Type

ERROR

Event Log

Description

A server exists in the specified server group.

Parameter

{0}: Server group ID

Corrective Action

Delete the server belonging to the indicated server group, and then execute the command.

CFMGC30105 The operation is not permitted for a server group managed by other server management software. [Server group ID:{0}]

Message Type

ERROR

Event Log

Description

The operation is not permitted for a server group managed by other server management software.

Parameter

{0}: Server group ID

Corrective Action

The operation is not permitted for the indicated server group. Execute the operation for the server group that was manually registered.

CFMGC30152 The specified command is invalid.
USAGE : swcfmg_server
{ -add -file "<server information file>" [-e "<character encoding>"] [-t] |
-update -file "<server information file>" [-e "<character encoding>"] [-t] |
-delete -serverid "<serverID>",... | -ip "<IP address>",... |
-list [-file "<output file path>"] [-e "<character encoding>"] [-servername "<server name>"] [-servergroupid "<server group ID>"] [-siteid "<site ID>" | -all] [-site | -getserverid] [-sort servergroup-id | lplatform-id] }

Message Type

ERROR

Event Log

Description

The specified command options are invalid.

Corrective Action

Configure the options correctly, and then execute the command.

CFMGC30153 The specified server does not exist. [Server:{0}]

Message Type

ERROR

Event Log

Description

The specified server does not exist.

Parameter

{0}: Server ID or IP address

Corrective Action

The indicated server does not exist. Execute for an existing server.

CFMGC30154 The operation is not permitted for a server managed by other server management software. [Server:{0}]

Message Type

ERROR

Event Log

Description

The operation is not permitted for a server managed by other server management software.

Parameter

{0}: Server ID or IP address

Corrective Action

The operation is not permitted for the indicated server. Execute the operation for the server that was manually registered.

CFMGC30155 The specified IP address is incorrect. [IP address:{0}]

Message Type

ERROR

Event Log

Parameter

{0}: IP address

CFMGC30201 The operation is not permitted during linkage to ServerView Resource Orchestrator.

Message Type

ERROR

Event Log

Description

The operation is not permitted during linkage to ServerView Resource Orchestrator.

Corrective Action

Perform the operation using ServerView Resource Orchestrator.

CFMGC30202 Failed to connect to ServerView Resource Orchestrator.

Message Type

ERROR

Event Log

Description

Connection to ServerView Resource Orchestrator failed.

Corrective Action

Check if ServerView Resource Orchestrator is running.

If the cause of the problem is other than the above, contact Fujitsu technical support.

CFMGC30203 Failed authentication to the directory service.

Message Type

ERROR

Event Log

Description

Directory service authentication failed.

Corrective Action

Check if the directory service is operating normally.
Check if the password of the directory service administrator is set correctly. Refer to "Changing the Password of an LDAP Administrator DN" in the Operation Guide for information on how to change the password of the directory service administrator.
If the cause of the problem is other than the above, contact Fujitsu technical support.

CFMGC30204 Failed to connect to the directory service.

Message Type

ERROR

Event Log

Description

Connection to the directory service failed.

Corrective Action

Check if the directory service is operating normally.

If the cause of the problem is other than the above, contact Fujitsu technical support.

CFMGC30252 The specified command is invalid.
USAGE : swcfmg_job
{ -list [-file "<job information file path>"] [-e "<character encoding>"] [-type <job type>] [-status "<status>"] [-owner "<user ID>"] [-tenant "<tenant ID>"] [-startdate "<start date>"] [-enddate "<end date>"] [-targettype "<target type>"] [-target "<target>"] |
-get -id "<job ID>" [-getstatus] -file "<output file path>" |
-select -id "<job ID>" -action "<action>" |
-delete -id "<job ID>" }

Message Type

ERROR

Event Log

Description

The specified command options are invalid.

Corrective Action

Specify the options correctly, and then execute the command.

CFMGC30253 Failed to connect to the database.

Message Type

ERROR

Event Log

Description

Connection to the database failed.

Corrective Action

Ensure that Systemwalker Software Configuration Manager is running. Refer to "Starting and Stopping Systemwalker Software Configuration Manager" in the Operation Guide for information on how to start Systemwalker Software Configuration Manager.
If the cause of the problem is other than the above, contact Fujitsu technical support.

CFMGC30254 The specified job does not exist. [Job ID:{0}]

Message Type

ERROR

Event Log

Description

The specified job does not exist.

Parameter

{0}: Job ID

Corrective Action

The indicated job does not exist. Specify an existing job.

CFMGC30255 The specified action does not exist. [Job ID:{0}][Action:{1}]

Message Type

ERROR

Event Log

Description

The specified action does not exist.

Parameter

{0}: Job ID

{1}: Action

Corrective Action

You cannot execute the indicated action for the indicated job. Specify an executable action.

CFMGC30256 The specified job cannot be deleted. [Job ID:{0}][Status:{1}]

Message Type

ERROR

Event Log

Description

The specified job cannot be deleted.

Parameter

{0}: Job ID

{1}: Status

Corrective Action

The indicated job cannot be deleted. Specify a job that can be deleted.

CFMGC30257 Failed to obtain detailed information about the job. [Job ID:{0}]

Message Type

ERROR

Event Log

Description

Acquisition of detailed information about the job failed.

Parameter

{0}: Job ID

Corrective Action

Ensure that Systemwalker Software Configuration Manager is running. Refer to "Starting and Stopping Systemwalker Software Configuration Manager" in the Operation Guide for information on how to start Systemwalker Software Configuration Manager.
If the cause of the problem is other than the above, contact Fujitsu technical support.

CFMGC30258 Failed to update job information.

Message Type

ERROR

Event Log

Description

Updating of job information failed.

Corrective Action

Ensure that Systemwalker Software Configuration Manager is running. Refer to "Starting and Stopping Systemwalker Software Configuration Manager" in the Operation Guide for information on how to start Systemwalker Software Configuration Manager.
If the cause of the problem is other than the above, contact Fujitsu technical support.

CFMGC30259 The specified parameter value is invalid. [Parameter:{0}]

Message Type

ERROR

Event Log

Description

The specified parameter value is invalid.

Parameter

{0}: Parameter

Corrective Action

The value specified for the indicated parameter is invalid. Specify the correct value.

CFMGC30260 Failed to execute the action. [Job ID:{0}][Action:{1}]

Message Type

ERROR

Event Log

Description

Execution of the action failed.

Parameter

{0}: Job ID

{1}: Action

Corrective Action

Ensure that Systemwalker Software Configuration Manager is running. Refer to "Starting and Stopping Systemwalker Software Configuration Manager" in the Operation Guide for information on how to start Systemwalker Software Configuration Manager.
If the cause of the problem is other than the above, contact Fujitsu technical support.

CFMGC30261 Failed to delete the job. [Job ID:{0}]

Message Type

ERROR

Event Log

Description

Deletion of the job failed.

Parameter

{0}: Job ID

Corrective Action

Ensure that Systemwalker Software Configuration Manager is running. Refer to "Starting and Stopping Systemwalker Software Configuration Manager" in the Operation Guide for information on how to start Systemwalker Software Configuration Manager.
If the cause of the problem is other than the above, contact Fujitsu technical support.

CFMGC30302 The specified command is invalid.
USAGE : swcfmg_environment -set -key <parameter> -value <value>

Message Type

ERROR

Event Log

Description

The specified command options are invalid.

Corrective Action

Configure the options correctly, and then execute the command.

CFMGC30303 The parameter cannot be changed during linkage to ServerView Resource Orchestrator. [Parameter:{0}]

Message Type

ERROR

Event Log

Description

The parameter cannot be changed during linkage to ServerView Resource Orchestrator.

Parameter

{0}: Parameter

Corrective Action

You cannot change the indicated parameter if linking to ServerView Resource Orchestrator. Specify a different parameter.

CFMGC30304 The specified parameter does not exist. [Parameter:{0}]

Message Type

ERROR

Event Log

Description

The specified parameter does not exist.

Parameter

{0}: Parameter

Corrective Action

Specify an existing parameter.

CFMGC30352 The specified command is invalid.
USAGE : swcfmg_patch_info
{ -list -t <Patch type> [-sourceid <Information collection source ID>] [-file <Output file path>] [-e <Character encoding>] |
-server -t <Patch type> [-sourceid <Information collection source ID>] [-snap <Snapshot name>] [-file <Output file path>] [-e <Character encoding>] [-ip <IP address>] [-status <Application status>] }

Message Type

ERROR

Event Log

Description

The specified command is invalid.

Corrective Action

Specify the options correctly, and then execute the command.

CFMGC30402 The specified command is invalid.
USAGE : swcfmg_server_info -lastupdate [{ -serverid "<serverID>" | -ip "<IP address>" }] [-snap "<snapshot name>"] [-file "<output file path>"] [-e "<character encoding>"]

Message Type

ERROR

Event Log

Description

The specified command is invalid.

Corrective Action

Specify the options correctly, and then execute the command.

CFMGC30452 The specified command is invalid.
USAGE : swcfmg_patch_apply -userid "<user ID>" { -serverid "<serverID>" | -ip "<IP address>" } -t "<patch type>" { -patch "<patch>",... | -file "<input file path>" [-e "<character encoding>"] } [-monitor "<monitoring period>"] [-prescript "<pre-execution script path>"] [-postscript "<post-execution script path>" [-postsgluser]] [-reboot] [-force] [-wait]

Message Type

ERROR

Event Log

Description

The specified command is invalid.

Corrective Action

Specify the options correctly, and then execute the command.

CFMGC30453 You do not have the privileges required to execute the patch. [User ID:{0}][Server ID:{1}][IP address:{2}]

Message Type

ERROR

Event Log

Description

You do not have the privileges required to execute the patch.

Parameter

{0}: User ID

{1}: Server ID

{2}: IP address

Corrective Action

Refer to "Login Users" in the Operator's Guide, and check if the indicated user has the privileges required to execute patches.
If the indicated user is a tenant user, check if the user owns the server group of the indicated server. If the indicated user is a tenant administrator, check if the server group of the indicated server in the managed tenant belongs to the user.

CFMGC30454 The specified patch cannot be applied. [Server ID:{0}][IP address:{1}][Patch:{2}]

Message Type

ERROR

Event Log

Description

The specified patch cannot be applied.

Parameter

{0}: Server ID

{1}: IP address

{2}:Patch

Corrective Action

Check that the displayed patch is one that has no been applied to the displayed server.
When deploying Fujitsu middleware with the "-force" option specified, check if the displayed patches are patches managed by Systemwalker Software Configuration Manager.

Refer to patch information display in the swcfmg_patch_info (Patch Information Output command) to check if the patches are managed by Systemwalker Software Configuration Manager.

CFMGC30455 The specified patch type is invalid. [Patch type:{0}]

Message Type

ERROR

Event Log

Description

The specified patch type is invalid.

Parameter

{0}:Patch type

Corrective Action

Patches of the displayed patch type cannot be applied to the specified server. When applying OS patches, specify the patch type that fits the OS type of the server.

CFMGC30456 The number of patches specified has exceeded the upper limit.

Message Type

ERROR

Event Log

Description

The number of patches specified has exceeded the upper limit.

Corrective Action

Check the number of patches specified, and then execute again.

CFMGC30457 The specified patch is duplicated. [Patch:{0}]

Message Type

ERROR

Event Log

Description

The specified patch is duplicated.

Parameter

{0}:Patch

Corrective Action

Correct the duplicity of the displayed patch and then execute again.

CFMGC30458 The process is already being executed in single-user mode. [Job ID:{0}]

Message Type

ERROR

Event Log

Description

The process is already being executed in single-user mode.

Parameter

{0}: Job ID

Corrective Action

A script or a command is being executed in single user-mode on the target server. Wait until the displayed job is completed, and then execute the process again. To complete the job, perform the following operation according to the status of the relevant job.

Running
Wait until the status changes and then execute the process again.
Selecting (abnormal)
To complete the job immediately, perform the Cancel action.
Waiting
To complete the job immediately, perform the Cancel action.

CFMGC30502 The specified command is invalid.
USAGE : swcfmg_script_execute -userid "<user ID>" { -serverid "<server ID>" | -ip "<IP address>" } -script "<script path>" [-monitor "<monitoring period>"] [-sgluser] [-reboot] [-wait]

Message Type

ERROR

Event Log

Description

The specified command is invalid.

Corrective Action

Specify the options correctly, and then execute the command.

CFMGC30503 You do not have the privileges required to execute the script. [User ID:{0}][Server ID:{1}][IP address:{2}]

Message Type

ERROR

Event Log

Description

You do not have the privileges required to execute the script.

Parameter

{0}: User ID

{1}: Server ID

{2}: IP address

Corrective Action

Refer to "Login Users" in the Operator's Guide, and check if the indicated user has the privileges required to execute scripts.
If the indicated user is a tenant user, check if the user owns the server group of the indicated server. If the indicated user is a tenant administrator, check if the server group of the indicated server in the managed tenant belongs to the user.

CFMGC30551 The command for managing hardware information has completed normally.

Message Type

INFO

Event Log

Description

The command for managing hardware information has completed normally.

Corrective Action

No action is required.

CFMGC30552 The specified command is invalid.
USAGE : swcfmg_hardware { -add -file "hardware information file" [-e "character encoding"] [-t] | -update -file "hardware information file" [-e "character encoding"] [-t] | -delete [-ip "IP address"] -serialno "serial number" | -list [-file "output file path"] [-e "character encoding"] }

Message Type

ERROR

Event Log

Description

The specified command is invalid.

Corrective Action

Specify options correctly and execute again.

CFMGC30553 The specified hardware does not exist. [IP address: {0}, Serial number: {1}]

Message Type

ERROR

Event Log

Description

A non-existent IP address or serial number was specified.

Parameter

{0}: IP address

{1}: Serial number

Corrective Action

Check whether the IP address or the serial number is correct.

CFMGC30554 Failed to register the account information.

Message Type

ERROR

Event Log

Description

The database is not running.

Corrective Action

Ensure that Systemwalker Software Configuration Manager is running. Refer to "Starting and Stopping Systemwalker Software Configuration Manager" in the "Operation Guide" for information on how to start Systemwalker Software Configuration Manager.
If the cause of the problem is other than the above, contact Fujitsu technical support.

CFMGC30555 Failed to update the account information.

Message Type

ERROR

Event Log

Description

The database is not running.

Corrective Action

Ensure that Systemwalker Software Configuration Manager is running. Refer to "Starting and Stopping Systemwalker Software Configuration Manager" in the "Operation Guide" for information on how to start Systemwalker Software Configuration Manager.
If the cause of the problem is other than the above, contact Fujitsu technical support.

CFMGC30556 Failed to delete the account information.

Message Type

ERROR

Event Log

Description

The database is not running.

Corrective Action

Ensure that Systemwalker Software Configuration Manager is running. Refer to "Starting and Stopping Systemwalker Software Configuration Manager" in the "Operation Guide" for information on how to start Systemwalker Software Configuration Manager.
If the cause of the problem is other than the above, contact Fujitsu technical support.

CFMGC30558 Failed to display the account information.

Message Type

ERROR

Event Log

Description

The database is not running.

Corrective Action

Ensure that Systemwalker Software Configuration Manager is running. Refer to "Starting and Stopping Systemwalker Software Configuration Manager" in the "Operation Guide" for information on how to start Systemwalker Software Configuration Manager.
If the cause of the problem is other than the above, contact Fujitsu technical support.

CFMGC30559 The IP address of the specified OS is already associated with another server.

Message Type

ERROR

Event Log

Description

An attempt is being made to associate the same OS with multiple physical servers.

Corrective Action

Either specify a different IP address or delete the association with the other server.

CFMGC30602 The specified command is invalid.
USAGE : swcfmg_configuration_change -userid <User ID> -templateid <Template ID> [-jobname <Job name>] [ -file <Parameter file path> [-e <Character encoding>] [-wait] | -batch <Batch parameter file path> [-e <Character encoding>] | -parameter <Parameter name>=<Parameter value>...[-wait] ]

Message Type

ERROR

Event Log

Description

The specified command is invalid.

Corrective Action

Specify the options correctly, and then execute the command.

CFMGC30603 You do not have the privileges required to use the specified creation modification template. [User ID:{0}][Configuration modification template ID:{1}]

Message Type

ERROR

Event Log

Description

The user does not have the privileges required to use the specified creation modification template.

Parameter

{0}: User ID

{1}: Configuration modification template ID

Corrective Action

After checking the scope of the displayed template, check if the displayed user can use the template.

CFMGC30604 The specified creation modification template does not exist. [Configuration modification template ID:{0}]

Message Type

ERROR

Event Log

Description

The specified configuration modification template does not exist.

Parameter

{0}: Configuration modification template ID

Corrective Action

The specified configuration modification template does not exist. Specify an existing configuration modification template.

CFMGC30605 The specified settings information is incorrect. [Process name:{0}][Settings information:{1}][Value:{2}][Cause:{3}]

Message Type

ERROR

Event Log

Description

There are errors in the specified setting information.

Parameter

{0}: Process name

{1}: Setting information

{2}: Value

{3}: Cause

Corrective Action

Revise the error displayed in the "Cause" of the message, checking the displayed the process name, setting information, and values, referring to "Definition of Setting Information" in the Operator's Guide.

CFMGC30606 The parameter value is not specified. [Parameter:{0}]

Message Type

ERROR

Event Log

Description

A parameter value has not been specified.

Parameter

{0}: Parameter name

Corrective Action

No value has been specified for the displayed parameter. Specify a value.

CFMGC30607 The specified parameter has not been defined. [Parameter:{0}]

Message Type

ERROR

Event Log

Description

The specified parameter has not been defined.

Parameter

{0}: Parameter name

Corrective Action

The displayed parameter has not been defined in the configuration modification template. Do not specify parameters which have not been defined in the configuration modification template.

CFMGC30608 The specified parameter is duplicated. [Parameter:{0}]

Message Type

ERROR

Event Log

Description

A parameter has been specified in duplicate.

Parameter

{0}: Parameter name

Corrective Action

Correct the duplicity of the displayed parameter.

CFMGC30609 The parameter value is not the value stipulated for the parameter type. [Parameter:{0}]

Message Type

ERROR

Event Log

Description

The parameter value is not the value stipulated for the parameter type.

Parameter

{0}: Parameter name

Corrective Action

Check if the parameter values are the values stipulated in the Parameter type, referring to "Definition of Parameters" in the Operator's Guide.

Server
Check if the specified server is managed by Systemwalker Software Configuration Manager.
File
- Asset
  Check that the specified asset or version exists. Check that the files have been uploaded to the asset.
- Files on the admin server
  Check that the name of the specified file is a character string composed of up to 255 printable ASCII characters. Check that the file specified for the file path exists, and the file size is 2MB or smaller.
Numerical value
Check that the specified value is a number between "-2,147,483,648" and "2,147,483,647".
Truth-value
Check that the specified truth-value is "true" or "false".

CFMGC30610 Acquisition of the job status failed. [Job ID:{0}]

Message Type

ERROR

Event Log

Description

Acquisition of the job status failed.

Parameter

{0}: Job ID

Corrective Action

Use the Job management window of the management console or the "-get" option of the Job Information Management command to check the status of the displayed job.

CFMGC30652 The specified command is invalid.
USAGE : swcfmg_changetemplate
{ -add [-id <Configuration modification template ID>] -name <Configuration modification template name> -userid <Administrator> -scope <Scope> [-description <Description>] -file <Path of the configuration modification template definition file> |
-update -id <Configuration modification template ID> [-name <Configuration modification template name>] [-userid <Administrator>] [-scope <Scope>] [-description <Description>] [-file <Path of the configuration modification template information file>] |
-batchupdate -csv <Path of the configuration modification template information file> [-e <Character encoding>] } |
-delete -id <Configuration modification template ID>, ...|
-list [-csv <Path for the output file>] [-e <Character encoding>] [-scope <Scope>] |
-get -id <Configuration modification template ID> [-file <Path for the output file>] | }

Message Type

ERROR

Event Log

Description

The specified command is invalid.

Corrective Action

Specify the options correctly, and then execute the command.

CFMGC30653 The specified ID is already in use. [ID:{0}]

Message Type

ERROR

Event Log

Description

The specified ID has been already used.

Parameter

{0}:ID

Corrective Action

Specify an ID that is not being used.

CFMGC30654 There is a parameter not used in settings information. [Parameter:{0}]

Message Type

ERROR

Event Log

Description

There is a parameter that is not being used for the setting information.

Parameter

{0}: Parameter name

Corrective Action

Take either of the following actions:

Use the displayed parameter for either of the setting information.
Delete the displayed parameter from the definition of the configuration modification template.

CFMGC30655 Unnecessary settings information has been set. [Process type:{0}][Settings information:{1}]

Message Type

ERROR

Event Log

Description

An unnecessary piece of setting information has been configured.

Parameter

{0}: Process type

{1}: Setting information

Corrective Action

Setting information that cannot be configured for the displayed process type has been configured. Delete the displayed setting information.

CFMGC30656 Necessary settings information has not been set. [Process type:{0}][Settings information:{1}]

Message Type

ERROR

Event Log

Description

A necessary piece of setting information has not been configured.

Parameter

{0}: Process type

{1}: Setting information

Corrective Action

Setting information required for the displayed process types has not been configured. Configure the displayed setting information.

CFMGC30657 The parameter has duplicate definitions. [Parameter:{0}]

Message Type

ERROR

Event Log

Description

A parameter has been defined in duplicate.

Parameter

{0}: Parameter name

Corrective Action

Correct the duplicity of the displayed parameter.

CFMGC30658 A value in the settings information of the configuration modification template is incorrect. [Settings information:{0}][Value:{1}][Cause:{2}]

Message Type

ERROR

Event Log

Description

The setting information of the configuration modification template is incorrect.

Parameter

{0}: Setting information

{1}: Value

{2}: Cause

Corrective Action

Revise the error displayed in the "Cause" of the message, checking the displayed setting information and values, referring to "Definition of Setting Information" in the Operator's Guide.

CFMGC30659 An invalid type of parameter has been specified in settings information. [Settings information:{0}][Parameter name:{1}]

Message Type

ERROR

Event Log

Description

An invalid type of parameter has been specified for the setting information.

Parameter

{0}: Setting information

{1}: Parameter name

Corrective Action

A parameter type that cannot be specified for the displayed setting information has been specified. Review the values of the displayed setting information, referring to "Definition of Parameters" in the Operator's Guide.

CFMGC30660 A value specified in the configuration modification template is incorrect. [Item:{0}][Value:{1}]

Message Type

ERROR

Event Log

Description

The value specified for the configuration modification template is incorrect.

Parameter

{0}: Item

{1}: Value

Corrective Action

Check the values of the displayed items, referring to "Configuration Modification Template Definition Files" in the Reference Guide.

CFMGC30702 The specified command is invalid.
USAGE : swcfmg_repository
{ -add -file <Path of the asset information file> [-e <Character encoding>] |
-update -file <Path of the asset information file> [-e <Character encoding>] |
-delete -id <Asset ID> |
-list [-file <Path of the asset information file>] [-e <Character encoding>] [-scope <Scope of the asset] |
-history -id <Asset ID> [-file <Output file path>] [-e <Character encoding>] |
-upload -id <Asset ID> -file <File path> [-comment <Comment>] |
-download -id <Asset ID> [-revision <Asset version>] -dir <Path of the output directory> | }

Message Type

ERROR

Event Log

Description

The specified command is invalid.

Corrective Action

Specify the options correctly, and then execute the command.

CFMGC30703 The specified asset does not exist. [Asset ID:{0}]

Message Type

ERROR

Event Log

Description

The specified asset does not exist.

Parameter

{0}: Asset ID

Corrective Action

Specify an existing asset.

CFMGC30704 The specified asset version does not exist. [Asset ID:{0}][Asset version:{1}]

Message Type

ERROR

Event Log

Description

The specified version of the asset does not exist.

Parameter

{0}: Asset ID

{1}: Asset version

Corrective Action

Specify an existing version of the asset. Check the version of the asset in the history display of the swcfmg_repository (Asset Information Management command).

CFMGC30705 As it is being used by an unfinished job, it cannot be deleted. [Job ID:{0}]

Message Type

ERROR

Event Log

Description

The asset cannot be deleted, as it is being used for a job that has not finished yet.

Parameter

{0}: Job ID

Corrective Action

As the asset is being used for the displayed job, it cannot be deleted. Wait until the displayed job finishes, and then execute the process again.

CFMGC30706 As it is being used by a configuration modification template, it cannot be deleted. [Configuration modification template ID:{0}]

Message Type

ERROR

Event Log

Description

The asset cannot be deleted, as it is used for the configuration modification template.

Parameter

{0}: Configuration modification template ID

Corrective Action

As the asset is used for the displayed configuration modification template, it cannot be deleted. Delete the displayed configuration modification template, and then execute the operation again.

CFMGC30707 Another operation is being performed on the specified asset. [Asset ID:{0}][Operation:{1}]

Message Type

ERROR

Event Log

Description

Another process is being executed for the specified asset.

Parameter

{0}: Asset ID

{1}: Operation

Corrective Action

The process cannot be executed, as another process is being executed for the displayed asset. After the operation being executed is completed, execute the operation again.

CFMGC30708 The file name is incorrect.

Message Type

ERROR

Event Log

Description

The file name is incorrect.

Corrective Action

Check that the name of the file is a character string composed of up to 255 printable ASCII characters.

CFMGC30709 No file has been uploaded for the specified asset. [Asset ID:{0}]

Message Type

ERROR

Event Log

Description

The files have not been uploaded to the specified asset.

Parameter

{0}: Asset ID

Corrective Action

Take either of the following actions:

Specify an asset for which the file has been uploaded.
Upload the files to the displayed asset.

CFMGC30710 Recovery of data failed. [Details:{0}]

Message Type

ERROR

Event Log

Description

Data recovery has failed.

Parameter

{0}: Details

Corrective Action

Contact Fujitsu technical support.

CFMGC30802 The specified command is invalid.
USAGE : swcfmg_hardware_info
{ -list [-file <Output file path>] [-e <Character encoding>] [-all]}

Message Type

ERROR

Event Log

Description

The specified command is invalid.

Corrective Action

Specify options correctly and execute again.

CFMGC30852 The specified command is invalid.
USAGE : swcfmg_patch_def
'{ -add [-sourceid <Information collection source ID>] -file <Patch information file path> [-e <Character encoding>] |
-update [-sourceid <Information collection source ID>] -file <Patch information file path> [-e <Character encoding>] |
-delete -id <Patch ID>,...|
-list [-sourceid <Information collection source ID>] [-file <Output file path>] [-e <Character encoding>] }

Error Type

ERROR

Output to Event Logs or Syslogs

Description

The specified command is invalid.

Corrective Action

Specify the options correctly, and then execute the command.

CFMGC30853 The specified patch information cannot be deleted because it is set as applied patch information. [Patch ID:{0}]

Error Type

ERROR

Output to Event Logs or Syslogs

Description

The specified patch information cannot be deleted because it is set as applied patch information.

Parameters

{0}: Patch ID

Corrective Action

To delete patch information, first delete all the applied patch information of the target patches and then execute.

CFMGC30902 The specified command is invalid.
USAGE : swcfmg_patch_applied
{ -add -file "<applied patch information file>" [-e "<character encoding>"]|
-delete -file "<applied patch information file>" [-e "<character encoding>"] |
-list [{-serverid "<server ID>",... | -ip "<IP address>",...}] [ -file "<output file path>"] [-e "<character encoding>"] [-all] }

Error Type

ERROR

Output to Event Logs or Syslogs

Description

The specified command is invalid.

Corrective Action

Specify the options correctly, and then execute the command.

CFMGC30952 The specified command is invalid.
USAGE : swcfmg_source_def
{ -add  -id <Information collection source ID> -softitem <Path of the collection item information file for Software> [-patchitem <Path of the collection item information file for patches>] -file <Script package file path> [-e <Character encoding>]  |
-update -id <Information collection source ID> [-softitem <Path of the collection item information file for Software>] [-patchitem <Path of the collection item information file for patches>] [-e <Character encoding>]  |
-batchupdate -file <Path of the information collection source file> [-e <Character encoding>]  |
-delete -id <Information collection source ID> |
-list [-file <Output file path>] [-e <Character encoding>]  |
-get -id <Information collection source ID> [-softitem <Path of the collection item information file>] [-patchitem <Path of the collection item information file>] [-e <Character encoding>]  |
-upload -id <Information collection source ID> -file <Script package file path>  |
-download -id <Information collection source ID> -dir <Output directory path> }

Error Type

ERROR

Output to Event Logs or Syslogs

Description

The specified command is invalid.

Corrective Action

Specify the options correctly, and then execute the command.

CFMGC31002 USAGE : swcfmg_report_view
{ -add [ -id <View ID> ] -name <View name> -file <View definition file path> |
-update -id <View ID> [ -name <View name> ] [ -file <View definition file path> ] |
-delete -id <View ID> |
-list [-file <Output file path> ] [-e <Character encoding>] |
-get -id <View ID> [ -file <Output file path> |
-report -id <View ID> [ -policyid <Policy ID> ] -file <Output file path> [-e <Character encoding>] }

Error Type

ERROR

Output to Event Logs or Syslogs

Description

The specified command is invalid.

Corrective Action

Specify the options correctly, and then execute the command.

CFMGC31003 The specified view cannot be updated because there are enabled policies. [Policy ID: {0}]

Error Type

ERROR

Output to Event Logs or Syslogs

Description

The specified view cannot be updated because there are enabled policies.

Parameters

{0}: Policy ID

Corrective Action

Disable all policies that are displayed and then update the view.

CFMGC31004 The layer information in the view definition is incorrect. [Layer number:{0}][Tag name:{1}]

Error Type

ERROR

Output to Event Logs or Syslogs

Description

The layer information in the view definition is incorrect.

Parameters

{0}: Layer number

{1}: Element name

Corrective Action

Review the value of the layer which has the displayed layer number.

CFMGC31005 The condition information in the view definition is incorrect. [Layer number:{0}][Tag name:{1}]

Error Type

ERROR

Output to Event Logs or Syslogs

Description

The condition information in the view definition is incorrect.

Parameters

{0}: Layer number

{1}: Element name

Corrective Action

Review the value of the condition for the layer which has the displayed layer number.

CFMGC31006 The column information in the view definition is incorrect. [Column number:{0}][Tag name:{1}]

Error Type

ERROR

Output to Event Logs or Syslogs

Description

The column information in the view definition is incorrect.

Parameters

{0}: Column number

{1}: Element name

Corrective Action

Review the value of the column which has the displayed column number.

CFMGC31007 The number of layers or columns specified in the view definition has exceeded the upper limit.

Error Type

ERROR

Output to Event Logs or Syslogs

Description

The number of layers or columns specified in the view definition has exceeded the upper limit.

Corrective Action

The upper limits of layers and columns that can be defined are 5 layers and 10 columns, respectively.

CFMGC31008 The specified view cannot be deleted. [Policy ID: {0}]

Error Type

ERROR

Output to Event Logs or Syslogs

Description

The specified view cannot be deleted.

Parameters

{0}: Policy ID

Corrective Action

Delete the displayed policy and then delete the view.

CFMGC31052 The specified command is invalid.
USAGE : swcfmg_report_policy
{ -add -file <Policy information file path> [-e <Character encoding>] |
-update -file <Policy information file path> [-e <Character encoding>] |
-delete -id <Policy ID> |
-list [ -file <Output file path>] [-e <Character encoding>] |
-report [ -file "Output file path"] [-e "Character encoding"] }

Error Type

ERROR

Output to Event Logs or Syslogs

Description

The specified command is invalid.

Corrective Action

Specify the options correctly, and then execute the command.