This chapter explains the outline, details, and the part changed with PRIMECLUSTER 4.3.
No | Version / Level | Change Location | Details |
|---|---|---|---|
1 | 4.3 | The supported hard device was changed as follows. | |
2 | 4.3 | Supported OS was changed to RHEL4.6 and RHEL5.1. | |
3 | 4.3 | The exit code of Check script was added. | |
4 | 4.3 | The setup value of RMS automatic startup (HV_RCSTART) was changed from "Does not start up automatically" to "Start up automatically". | |
5 | 4.3 | The procedure which nullified the setting of the Hot Plug in the RHEL5.1 environment was added to the operational procedure. | |
6 | 4.3 | Attention by the configuration setting of GDS was added. | |
7 | 4.3 Second edition | RX600 S4 was added for the supported hardware device. | |
8 | 4.3 Second edition | RHEL5.2 has been added for the supported OS. | |
9 | 4.3 Third edition |
| Changed company name to "Fujitsu Technology Solutions" |
10 | 4.3 Fourth edition | RHEL AS 4.7 and RHEL5.3 have been added for the supported OS. | |
11 | 4.3 Fourth edition | The supported hardware device was added as follows. | |
12 | 4.3 Fifth edition | Descriptions of "7.2.2.6 Entering maintenance mode for Cluster Application" were added. | |
13 | 4.3 Fifth edition | The supported OS was added as follows. | |
14 | 4.3 Fifth edition | RX300 S5 was added. | |
15 | 4.3 Fifth edition |
| The function to operate guest operating systems in the virtual machine function as a cluster system was added. |
16 | 4.3 Sixth edition | BX960 was added for the supported hardware device. | |
17 | 4.3 Sixth edition | Supported OS was changed to RHEL5.3 or later, and RHEL6.X. | |
18 | 4.3 Sixth edition | Descriptions about RHEL6 were added for the supported OS. | |
19 | 4.3 Sixth edition | Descriptions when the cluster is operated between guest OSes on multiple host OSes with the virtual machine function were added and changed. | |
20 | 4.3 Sixth edition | The file name of the GFS shared file system was changed. | |
21 | 4.3 Sixth edition | The explanation of "physical machine" was added. | |
22 | 4.3 Sixth edition | Descriptions of Configuration Update Service for SA were added. | |
23 | 4.3 Sixth edition | Descriptions for using the VMware environment with the virtual machine function were added. | |
24 | 4.3 Sixth edition | Settings for the CF node name were changed. | |
25 | 4.3 Sixth edition | Notes were added. | |
26 | 4.3 Sixth edition | Procedures to change the MMB IP address were added. | |
27 | 4.3 Sixth edition | Procedures to change IPMI settings were added. | |
28 | 4.3 Sixth edition | Procedures to change Blade settings were added. | |
29 | 4.3 Sixth edition | Procedures to add, delete, and change hardware were added. | |
30 | 4.3 Sixth edition | Procedures to change the startup priority of a state transition procedure were added. | |
31 | 4.3 Sixth edition | The test for forced shutdown of cluster nodes was added. | |
32 | 4.3 Sixth edition | Descriptions of Diskdump were deleted. | |
33 | 4.3 Sixth edition | Descriptions of check for the cluster environment were added. | |
34 | 4.3 Sixth edition | The name of Installation Guide was changed to Software Release Guide. | |
35 | 4.3 Sixth edition | Procedures to register a state transition procedure were added. | |
36 | 4.3 Sixth edition |
| Descriptions about PRIMEQUEST 500/400 series were deleted. |
37 | 4.3 Sixth edition | Descriptions about NetScape were deleted. | |
38 | 4.3 Sixth edition | Incompatibilities for the client environment for Web-Based Admin View were added. | |
39 | 4.3 Sixth edition | Changed the number of supported nodes. | |
40 | 4.3 Sixth edition | Descriptions for using a KVM environment with the virtual machine function were added and chanted. | |
41 | 4.3 Sixth edition | Changed PSA to PSA/SVmco. | |
42 | 4.3 Sixth edition | Added the description to recover the cluster interconnect when an error occurs. | |
43 | 4.3 Sixth edition | Added the supported server models. | |
44 | 4.3 Sixth edition | Added the description on how to collect the SVmco information. | |
45 | 4.3 Sixth edition | Added incompatible messages. | |
46 | 4.3 Sixth edition | Added incompatible functions for the Changes of the Behavior of CF Startup. | |
47 | 4.3 Seventh edition | Added notes to the explanation of the test for forced shutdown of cluster nodes. | |
48 | 4.3 Seventh edition | Changed the use when building a cluster system between guest OSes on one host OS. | |
49 | 4.3 Seventh edition | Added "Single-Node Cluster Operation." | |
50 | 4.3 Seventh edition | Changed titles and procedures in Chapter 3. | |
51 | 4.3 Seventh edition | Added notes on umask. | |
52 | 4.3 Seventh edition | Added notes on immediate cluster failover when an I/O device where the system volume is allocated fails. | |
53 | 4.3 Seventh edition | Deleted descriptions for "Behavior setup of recovery function." | |
54 | 4.3 Seventh edition | Changed "Attached Driver Guide" to "PRIMEQUEST 1000 SERIES HBA blockage function USER'S GUIDE." | |
55 | 4.3 Seventh edition | Changed the setting procedure of virtual SCSI devices in a KVM environment. | |
56 | 4.3 Seventh edition | Changed the setting procedure of virtual bridges in a Xen environment. | |
57 | 4.3 Seventh edition | Added the setting procedure for the guest OS in the host OS. | |
58 | 4.3 Seventh edition | Added the reference when changing the settings in /etc/sysconfig/libvirt-guests. | |
59 | 4.3 Seventh edition | Added notes on setting up the virtual bridge for the administrative LAN in a KVM environment. | |
60 | 4.3 Seventh edition | Added notes when setting /etc/sysconfig/libvirt-guests. | |
61 | 4.3 Seventh edition | Added explanation of IPv6. | |
62 | 4.3 Seventh edition | Changed the procedure of Host OS failover function. | |
63 | 4.3 Seventh edition | Added "Installation and Setup of Related Software." | |
64 | 4.3 Seventh edition | Added notes on Firewall. | |
65 | 4.3 Seventh edition | Added notes when sharing the administrative LAN and the cluster interconnect on the same NIC. | |
66 | 4.3 Seventh edition | Changed the explanation about the user name and password for logging in to the host OS or hypervisor. | |
67 | 4.3 Seventh edition | Added notes on the operation check after setting up the shutdown agent. | |
68 | 4.3 Seventh edition | Added explanations of examples and notes on setting the configuration file for the shutdown agent. | |
69 | 4.3 Seventh edition | Added information to be checked when "TestFailed" or "InitFailed" is displayed in Information "About the displayed results." | |
70 | 4.3 Seventh edition | Changed descriptions when "TestFailed" or " InitFailed" is displayed in Information. | |
71 | 4.3 Seventh edition | Changed descriptions for "Preparation prior to displaying fault resource identification and operator intervention request messages." | |
72 | 4.3 Seventh edition | Changed notes on setting up the host OS in Note. | |
73 | 4.3 Seventh edition | Changed the explanation of the environment variable HV_AUTORECOVER. | |
74 | 4.3 Seventh edition | Added "PartialCluster" to the attribute of userApplication. | |
75 | 4.3 Seventh edition |
| Delete the explanation for associating resources to a cluster service instance for PRIMECLUSTER-compatible products. |
76 | 4.3 Seventh edition | Added "Setting Up the RMS Environment." | |
77 | Seventh edition | Deleted the explanation if faults are cleared while the cluster application is Online. | |
78 | 4.3 Seventh edition | Added notes on use of maintenance mode. | |
79 | 4.3 Seventh edition | Added "Changing the Settings in /etc/sysconfig/libvirt-guests." | |
80 | 4.3 Seventh edition | Changed the structure of this section to add explanations to change the user name and password for iRMC. | |
81 | 4.3 Seventh edition | Changed the structure of this section to add explanations to change the slot number of server blades. | |
82 | 4.3 Seventh edition | Added conditions where stopping RMS is not necessary to Information. | |
83 | 4.3 Seventh edition | Added explanations of when setting Gds resources is not necessary. | |
84 | 4.3 Seventh edition | Described the procedure required after execution of the cldelrsc command. | |
85 | 4.3 Seventh edition | Added notes on the GDS configuration file. | |
86 | 4.3 Seventh edition | Added the procedure "5. Change the device name of the resource of the shared disk device." | |
87 | 4.3 Seventh edition | Changed the explanation for executing failover of the cluster application. | |
88 | 4.3 Seventh edition | Added notes when using message queues on applications. | |
89 | 4.3 Seventh edition | Added the item of RMS shutdown wait time. | |
90 | 4.3 Seventh edition | Added notes for the maximum numbers of resources and detectors. | |
91 | 4.3 Seventh edition | Changed the contents in "Setting value" of "Use" in "Item." | |
92 | 4.3 Seventh edition | Changed the Gds Resource. | |
93 | 4.3 Seventh edition | Delete the following commands from the list of the online manual page for RMS:
| |
94 | 4.3 Seventh edition | Changed the description in Note. | |
95 | 4.3 Seventh edition | Added notes on environments and functions which PRIMECLUSTER supports. | |
96 | 4.3 Seventh edition | Added notes when using a switchover file system on the shared disk. | |
97 | 4.3 Seventh edition | Added functions which are not available on the virtual machine where PRIMECLUSTER is to be installed. | |
98 | 4.3 Seventh edition | Changed notes on the Native Multipathing (NMP). | |
99 | 4.3 Seventh edition | Changed points when installing VMware vSphere. | |
100 | 4.3 Seventh edition | Changed descriptions of the setting for SCSI controllers. | |
101 | 4.3 Seventh edition | Added the step to set up the /etc/hostid file. | |
102 | 4.3 Seventh edition | Changed step 1. | |
103 | 4.3 Seventh edition | Added the appendix. | |
104 | 4.3 Seventh edition | Added the appendix. | |
105 | 4.3 Seventh edition | Added "HV_CONNECT_TIMEOUT" in all versions as an incompatible function. | |
106 | 4.3 Seventh edition | Added "Changes in PRIMECLUSTER 4.3A20 from 4.2A30." |
