There are incompatibilities of a setup of the shutdown facility and the shutdown configuration wizard in the following models:
Details on incompatibilities
Changed the screen of the shutdown configuration wizard to set up the shutdown facility for SPARC Enterprise M3000, M4000, M5000, M8000, or M9000.
Changes
There were selection items of SCON from the selection screen of a shutdown agent.
Select RCI Panic, XSCF Panic, Console Break, RCI Reset, and XSCF Reset from the selection screen of a shutdown agent and make settings.
In the setup screen of Wait for PROM, the check box of Wait for PROM has checked by default.
Set a timeout value of a shutdown agent in the setup screen of the timeout value.
One IP address of XSCF can be set.
Deleted SCON from the selection screen of the shutdown agent.
Added XSCF (SPARC M10) to the selection screen of the shutdown agent.
Changed to XSCF (SPARC Enterprise M-series) from XSCF on the selection screen of the shutdown agent.
When XSCF (SPARC M10) is selected from the selection screen of a shutdown agent, XSCF Domain Panic, XSCF Domain Reset, and XSCF PPAR Reset are automatically set according to the hardware state.
When XSCF (SPARC Enterprise M-series) is selected from the selection screen of a shutdown agent, XSCF Panic, XSCF Break, and XSCF Reset are automatically set.
When XSCF (SPARC Enterprise M-series) and Use RCI are selected from the selection screen of a shutdown agent, RCI Panic, XSCF Panic, XSCF Break, RCI Reset, and XSCF Reset are automatically set.
In the setup screen of Wait for PROM, the checkbox of Wait for PROM is not checked by default.
Timeout value of a shutdown agent is automatically set.
Up to two IP addresses of XSCF can be set.
Note
The XSCF supported in 4.2A00 is changed to XSCF (SPARC Enterprise M-series).
Details on incompatibilities
The shutdown configuration wizard is available to set up the shutdown facility for SPARC Enterprise T1000 or T2000.
Changes
Setup of the shutdown facility for SPARC Enterprise T1000 or T2000 is performed by CLI.
Setup of the shutdown facility for SPARC Enterprise T1000 or T2000 is performed by the shutdown configuration wizard.
Note
None.
Details on incompatibilities
The shutdown configuration wizard is available to set up the shutdown facility for SPARC Enterprise T5120, T5220, T5140, T5240, T5440, or SPARC T3 series.
Changes
Setup of the shutdown facility for SPARC Enterprise T5120, T5220, T5140, T5240, T5440, or SPARC T3 series is performed by CLI.
Setup of the shutdown facility for SPARC Enterprise T5120, T5220, T5140, T5240, T5440, or SPARC T3 series is performed by the shutdown configuration wizard.
Note
None.
