Top
PRIMECLUSTER  Installation and Administration Guide4.3

8.11.3 Replacing XSCF

This section describes the necessary procedure for replacing XSCF.

  1. Replacing XSCF

    Follow the procedure in "10.2 Maintenance Flow" to ask field engineers to replace XSCF. (Perform the stop maintenance.)

  2. Checking the XSCF information

    Check the XSCF settings. For SPARC Enterprise M3000, M4000, M5000, M8000, and M9000, see "5.1.2.1.1 Checking Console Configuration."

  3. Setting the IP address of XSCF

    Perform this step only when changing the IP address of XSCF.

    Follow Steps 11 and 12 in "8.2 Changing an IP Address on the Public LAN" to set the IP address of XSCF again.