Create userApplication and NAS resources using the CUI hvw command (RMS Configuration Wizard).
See
Refer to "PRIMECLUSTER Installation and Administration Guide" for details of making userApplication.
Scalable operation
userApplication is configured as shown in the illustration.
Standby operation
userApplication is configured as shown in the illustration.
RMS Configuration Wizard Start
Start the RMS Configuration Wizard by executing the following command on any one of nodes in a cluster system:
hvw -n <RMS configuration name>
You can specify any configuration name for the hvw command.
userApplication creation
When the RMS Configuration Wizard is started, the following menu is displayed. Select Application-Create to create userApplication.
node1: Main configuration menu, current configuration: nas_config No RMS active in the cluster 1) HELP 10) Configuration-Remove 2) QUIT 11) Configuration-Freeze 3) Application-Create 12) Configuration-Thaw 4) Application-Edit 13) Configuration-Edit-Global-Settings 5) Application-Remove 14) Configuration-Consistency-Report 6) Application-Clone 15) Configuration-ScriptExecution 7) Configuration-Generate 16) RMS-CreateMachine 8) Configuration-Activate 17) RMS-RemoveMachine 9) Configuration-Copy Choose an action: 3
When the selection menu of the turnkey wizard is displayed, select NAS. When the environment definition file made with PRIMECLUSTER Wizard for NAS 4.2A30/4.3A10/4.3A20/4.3A30 is continuously used, NETAPP is used.
Creation: Application type selection menu: 1) HELP 2) QUIT 3) RETURN 4) OPTIONS 5) CRM 6) DEMO 7) GENERIC 8) NAS 9) NETAPP 10) SYMFOWARE Application Type: 8
Select Machines+Basics.
Settings of turnkey wizard "NAS" 1) HELP 2) NO-SAVE+EXIT 3) SAVE+EXIT 4) REMOVE+EXIT 5) ApplicationName=APP1 6) BeingControlled=no 7) Machines+Basics(-) Choose the setting to process: 7
Machines+Basics wizard is displayed.
Machines+Basics (app1:consistent) 1) HELP 14) (AutoStartUp=no) 2) - 15) (AutoSwitchOver=No) 3) SAVE+EXIT 16) (PreserveState=no) 4) REMOVE+EXIT 17) (PersistentFault=0) 5) AdditionalMachine 18) (ShutdownPriority=) 6) AdditionalConsole 19) (OnlinePriority=) 7) Machines[0]=node1RMS 20) (StandbyTransitions=) 8) (PreCheckScript=) 21) (LicenseToKill=no) 9) (PreOnlineScript=) 22) (AutoBreak=yes) 10) (PostOnlineScript=) 23) (AutoBreakMaintMode=no) 11) (PreOfflineScript=) 24) (HaltFlag=no) 12) (OfflineDoneScript=) 25) (PartialCluster=0) 13) (FaultScript=) 26) (ScriptTimeout=) Choose the setting to process:
Configure userApplication according to environments.
Information
The recommended values are as follows. The other attributes not described below are optional.
Scalable operation
Attributes | Values |
|---|---|
AutoSwitchOver | No |
PersistentFault | 1 |
Standby operation
Attributes | Values |
|---|---|
AdditionalMachine | Add a standby node. (required) |
AutoSwitchOver | HostFailure|ResourceFailure|ShutDown |
PersistentFault | 1 |
HaltFlag | yes |
When configuration is completed, save it pressing SAVE+EXIT.
Register the NAS resource by the following procedures. The NAS resource registration procedure is different according to the NAS device used. When NetApp Filer(7-Mode) is used, refer to "2.5.3 NAS resource creation (NetApp Filer(7-Mode) is used)". When NetApp Filer(cDOT) is used, refer to "2.5.4 NAS resource creation (NetApp Filer (cDOT) is used)". When ETERNUS DX device is used, refer to "2.5.5 NAS resource creation (ETERNUS DX is used)".
