Top
ETERNUS SF Storage Cruiser V16.1 Operation Guide
FUJITSU Storage
Chapter 13 Command References > 13.1 Manager Commands > 13.1.2 Commands for Storage Management
PreviousNext

13.1.2 Commands for Storage Management

The following sub sections explain the commands for managing the storage device.
In the Windows environment, only a user of the Administrators group can execute this commad.
In the Solaris or Linux environment, only OS administrator (root) user can execute this command.

The following table shows the relationship between commands and the storage devices where they can be used. The storage device must be registered with this software.

Command Name

ETERNUS DX80 S2
ETERNUS DX90 S2
ETERNUS DX100 S3/DX200 S3
ETERNUS DX400 S2 series
ETERNUS DX500 S3/DX600 S3
ETERNUS DX8000 S2 series

ETERNUS DX60/DX60 S2
ETERNUS DX80
ETERNUS DX90
ETERNUS DX400 series
ETERNUS DX8000 series

storageadm disk

Available

Available

storageadm raid

Available (*2)

Available

storageadm volume

Available

Available

storageadm affinity

Available

Available

storageadm ecomode

Available (*3)

Available

storageadm port

Available

Available

storageadm iscsiport

Available

Available (*1)

storageadm progress

Available

Available

*1: For ETERNUS DX60/DX60 S2/DX80, only iSCSI model device is supported.
*2: ecomode operand does not support ETERNUS DX200F.
*3: This command does not support ETERNUS DX200F.

13.1.2.1 storageadm disk (Disk Management Command)

NAME

storageadm disk - Manages disks

SYNOPSIS

storageadm disk info -ipaddr ipaddr [-csv]

COMMAND PATH

Windows Environment
$INS_DIR\ESC\Manager\opt\FJSVssmgr\sbin\storageadm disk

($INS_DIR means "Program Directory" specified at the ETERNUS SF Manager installation.)

Solaris or Linux Environment
/opt/FJSVssmgr/sbin/storageadm disk

DESCRIPTION

This command displays information of disks in the ETERNUS Disk storage system that is registered with this software.

OPERANDS

info

Displays detail information of disks in the ETERNUS Disk storage system that is registered with this software.

OPTIONS

Options of "info" Operand
-ipaddr ipaddr

Specify the IP address of the storage device.

-csv

Displays the disk information in the CSV format.
If this option is omitted, it is displayed in the table format.

EXAMPLES

13.1.2.2 storageadm raid (RAID Management Command)

NAME

storageadm raid - Manages RAID groups

SYNOPSIS

storageadm raid add -ipaddr ipaddr -disk DE_number:slot_number,DE_number:slot_number[,DE_number:slot_number,...] -level RAIDlevel [-name alias_name] [-cm assigned_CM] [-fr-consist diskConfiguration] [-csv]
storageadm raid delete -ipaddr ipaddr -raidgroup RAIDgroup_number [-f] [-s]
storageadm raid info -ipaddr ipaddr [-raidgroup RAIDgroup_number | -expand] [-remote BOX-ID] [-csv]
storageadm raid ecomode -ipaddr ipaddr -raidgroup RAIDgroup_number[,RAIDgroup_number,...] -on [-type eco-mode setting]|-off [-s]

COMMAND PATH

Windows Environment
$INS_DIR\ESC\Manager\opt\FJSVssmgr\sbin\storageadm raid

($INS_DIR means "Program Directory" specified at the ETERNUS SF Manager installation.)

Solaris or Linux Environment
/opt/FJSVssmgr/sbin/storageadm raid

DESCRIPTION

This command is used to create/delete/display and sets the Eco-mode for a RAID group in the ETERNUS Disk storage system that is registered with this software.

OPERANDS

add

Creates a RAID group

delete

Deletes a RAID group

info

Displays a RAID group information

ecomode

Sets the Eco-mode for the RAID group

OPTIONS

Options of "add" Operand
-ipaddr ipaddr

Specify the IP address of the storage device.

-disk DE_number:slot_number,DE_number:slot_number[,DE_number:slot_number,...]

Specify DE numbers and slot numbers for the storage device using either decimal or hexadecimal notation, placing a colon (":") in the middle of each DE number and slot number pair, and using commas (",") to separate pairs. For example, two pairs can be specified as "-disk 1:1,1:2" in decimal notation or "-disk 0x1:0x1,0x1:0x2" in hexadecimal notation.
Be sure to specify at least two DE number/slot number pairs.

-level RAIDlevel

Specify the RAID level by the minuscule as follows.

Characters That Can Be Specified

Created RAID Level

raid0

RAID0

raid1

RAID1

raid1+0

RAID1+0

raid5

RAID5

raid5+0

RAID5+0

raid6

RAID6

raid6-fr

RAID6-FR

-fr-consist diskConfiguration

Specify RAID6-FR disk configuration. If "raid6-fr" is specified by -level option, this option must be specified.

Specifiable String

No. of Disks

RAID6-FR Disk Configuration

(3D+2P)*2+1HS

11

RAID6(3+2)*2, HS*1

(6D+2P)*2+1HS

17

RAID6(6+2)*2, HS*1

(9D+2P)*2+1HS

23

RAID6(9+2)*2, HS*1

(12D+2P)*2+1HS

29

RAID6(12+2)*2, HS*1

(5D+2P)*4+1HS

29

RAID6(5+2)*4, HS*1

(13D+2P)*2+1HS

31

RAID6(13+2)*2, HS*1

(3D+2P)*6+1HS

31

RAID6(3+2)*6, HS*1

-name alias_name

Specify an alias for the RAID group to be created.
Only alphanumeric characters (a to z, A to Z and 0 to 9) and the following symbols can be used for aliases: !@#$%^&*()-= `_+|~[]{};:'"./<>?. However, "?" is not supported for ETERNUS DX80 S2/DX90 S2, DX100 S3/DX200 S3, DX400 S2 series, DX500 S3/DX600 S3 and DX8000 S2 series. If the alias contains a space, enclose the entire alias in double quotes (e.g., -name "123 567").

If this option is omitted, the specification is as follows:

Storage Device

Specification When This Option Is Omitted

ETERNUS DX60/DX60 S2
ETERNUS DX80/DX80 S2
ETERNUS DX90/DX90 S2
ETERNUS DX100 S3/DX200 S3
ETERNUS DX400 S2 series
ETERNUS DX500 S3/DX600 S3
ETERNUS DX8000 S2 series

An alias name is set automatically.

ETERNUS DX400 series
ETERNUS DX8000 series

An alias name is not set.

-cm assigned_CM

Specify the assigned CM number for the RAID group using two digits, as in the following table. If this option is omitted, the assigned CM number will be set up automatically ("auto" will be specified).

Storage Device

Assigned CM

Characters to Be Specified

Remarks

ETERNUS DX60/DX60 S2
ETERNUS DX80/DX80 S2
ETERNUS DX90/DX90 S2
ETERNUS DX100 S3/DX200 S3
ETERNUS DX500 S3/DX600 S3

CM#0

00

For the first digit, enter the assigned CM number.
For the second character, always enter "0".

CM#1

10

ETERNUS DX400 series
ETERNUS DX400 S2 series
ETERNUS DX8000 series
ETERNUS DX8000 S2 series

CM#0 CPU#0

00

For the first digit, enter the assigned CM number.
For the second digit, enter the number of the CPU within the CM entered for the first digit.

CM#0 CPU#1

01

CM#1 CPU#0

10

CM#1 CPU#1

11

:

:

CM#7 CPU#0

70

CM#7 CPU#1

71

-csv

Displays the RAID group number in the CSV format.
If this option is omitted, it is displayed in the table format.

Options of "delete" Operand
-ipaddr ipaddr

Specify the IP address of the storage device.

-raidgroup RAIDgroup_number

Specify the RAID group number to be deleted, using either decimal or hexadecimal notation. For example, RAID group number 16 can be specified as "-raidgroup 16" in decimal notation or "-raidgroup 0x10" in hexadecimal notation.

-s

Processing continues without the output of a confirmation message.

-f

If there are volumes within the RAID group, the volumes will be deleted before the RAID group is deleted. However, the command will terminate with an error without deleting the volumes if any of the following conditions apply to the RAID group:

  • The volumes in the RAID group have been mapped

  • There are volumes other than open volumes

  • There are LUN concatenated volumes

  • There are ODX Buffer Volumes

Options of "info" Operand
-ipaddr ipaddr

Specify the IP address of the storage device.

-raidgroup RAIDgroup_number

Specify the RAID group number for which detailed information is to be displayed, using either decimal or hexadecimal notation. For example, RAID group number 16 can be specified as "-raidgroup 16" in decimal notation or "-raidgroup 0x10" in hexadecimal notation.

-expand

Add and display the following matters to RAID group information:

Item

Explanation

STRIPE_SIZE

Displays the stripe size of RAID group.

STRIPE_DEPTH

Displays the stipe depth of RAID group.

FAST_RECOVERY_CONFIGURATION

Displays RAID6-FR disk configuration.

Displayed information depends on the version of ETERNUS SF system. If the version of ETERNUS SF system is upgraded, displayed information may be increased.

If this option is specified, -raidgroup option cannot be specified.

-remote BOX-ID

Specify a Box ID for the remote site ETERNUS Disk storage system. Specify it when you display the RAID group information of the remote site ETERNUS Disk storage system.

-csv

Displays the RAID group information in the CSV format.
If this option is omitted, it is displayed in the table format.

Options of "ecomode" Operand
-ipaddr ipaddr

Specify the IP address of the storage device.

-raidgroup RAIDgroup_number[,RAIDgroup_number,...]

Specify the RAID group number for which detailed information is to be displayed, using decimal and/or hexadecimal notations. For example, RAID group number 16 can be specified as "-raidgroup 16" in decimal notation or "-raidgroup 0x10" in hexadecimal notation.
The more than one RAID group number can be specified.

-on

Set the Eco-mode to ON for the specified RAID group.
This option cannot be specified at the same time as the -off option.
This option cannot be set if the Eco-mode cannot be set for any one of the specified RAID groups.

-type eco-mode setting

If -on option is specified, this option can be specified.

If -on option is specified and -type option is omitted, set Eco-mode that stops spindle rotation of disk drives to ON.

Enter Eco-mode in lower-case letters as shown below:

Specifiable String

Explanation

motoroff

Sets Eco-mode that stops spindle rotation of disk drives to ON.

poweroff

Sets Eco-mode that powers off disk drives to ON.

-off

Set the Eco-mode to OFF for the specified RAID group.
This option cannot be specified at the same time as the -on option.

-s

Continues processing without asking for confirmation.

EXAMPLES

NOTES

13.1.2.3 storageadm volume (Volume Management Command)

NAME

storageadm volume - Manages volumes

SYNOPSIS

storageadm volume add -ipaddr ipaddr -size capacity -raidgroup RAIDgroup_number [-name alias_name] [-csv]
storageadm volume delete -ipaddr ipaddr [-volume volume_number[,volume_number,...]] [-remote BOX-ID -remote-volume volume_number [-remote-force]] [-s]
storageadm volume format -ipaddr ipaddr -volume volume_number[,volume_number,...] [-s]
storageadm volume info -ipaddr ipaddr [-volume volume_number,...] [-remote BOX-ID] [-csv]
storageadm volume nomapping -ipaddr ipaddr [-volume volume_number,...] [-remote BOX-ID] [-csv]

COMMAND PATH

Windows Environment
$INS_DIR\ESC\Manager\opt\FJSVssmgr\sbin\storageadm volume

($INS_DIR means "Program Directory" specified at the ETERNUS SF Manager installation.)

Solaris or Linux Environment
/opt/FJSVssmgr/sbin/storageadm volume

DESCRIPTION

This command is used to create/delete/format/display volumes in the ETERNUS Disk storage system that is registered with this software.

OPERANDS

add

Creates a volume.

delete

Deletes volumes.

format

Formats volumes.

info

Displays volume information.

nomapping

Displays the information of volumes that are not mapped to affinity group.

OPTIONS

Options of "add" Operand
-ipaddr ipaddr

Specify the IP address of the storage device.

-size capacity

Specify the size of the volume to be created in MB or GB. 1 GB is equivalent to 1024 MB. For example, 1024 MB is specified as "-size 1024MB" or "-size 1GB".

-raidgroup RAIDgroup_number

Specify the RAID group number for which a volume is to be created, using either decimal or hexadecimal notation. For example, RAID group number 16 can be specified as "-raidgroup 16" in decimal notation or "-raidgroup 0x10" in hexadecimal notation.

-name alias_name

Specify an alias for the volume to be created.
Only alphanumeric characters (a to z, A to Z and 0 to 9) and the following symbols can be used for aliases: !@#$%^&*()-= `_+|~[]{};:'"./<>?. However, "?" is not supported for ETERNUS DX80 S2/DX90 S2, DX100 S3/DX200 S3, DX400 S2 series, DX500 S3/DX600 S3 and DX8000 S2 series. If the alias contains a space, enclose the entire alias in double quotes (e.g., -name "123 567").

If this option is omitted, the specification is as follows:

Storage Device

Specification When This Option Is Omitted

ETERNUS DX60/DX60 S2
ETERNUS DX80/DX80 S2
ETERNUS DX90/DX90 S2
ETERNUS DX100 S3/DX200 S3
ETERNUS DX400 S2 series
ETERNUS DX500 S3/DX600 S3
ETERNUS DX8000 S2 series

An alias name is set automatically.

ETERNUS DX400 series
ETERNUS DX8000 series

An alias name is not set.

-csv

Displays the created volume number in the CSV format.
if this option is omitted, it is displayed in the table format.

Options of "delete" or "format" Operand
-ipaddr ipaddr

Specify the IP address of the storage device.

-volume volume_number[,volume_number,...]

Specify the numbers for the volumes to be deleted or formatted, using either decimal or hexadecimal notation.
If multiple volume numbers are specified, use commas (",") to separate volume numbers. For example, specify volumes 10 and 16 as either "-volume 10,16" in decimal notation or "-volume 0xa,0x10" in hexadecimal notation.

-remote BOX-ID

Specify a Box ID for the remote site ETERNUS Disk storage system. Specify it when you display the RAID group information of the remote site ETERNUS Disk storage system.

-remote-volume volume_number

Specify the number for the volume to be deleted from the remote site ETERNUS Disk storage system using either a decimal or hexadecimal number. Multiple volume numbers cannot be specified. If multiple volume numbers are specified, only the first one will be used.
Volumes which may be currently used cannot be deleted.

-remote-force

Specify this option to forcibly delete volumes, which may be currently used, from the remote site ETERNUS Disk storage system.

-s

Processing continues without the output of a confirmation message.

Options of "info" or "nomapping" Operand
-ipaddr ipaddr

Specify the IP address of the storage device.

-volume volume_number[,volume_number,...]

Specify the numbers for the volumes to be output for which information is to be output, using either decimal or hexadecimal notation.
If multiple volume numbers are specified, use commas (",") to separate volume numbers. For example, specify volumes 10 and 16 as either "-volume 10,16" in decimal notation or "-volume 0xa,0x10" in hexadecimal notation.

If this option is omitted, information will be displayed for all target volumes.

-remote BOX-ID

Specify a Box ID for the remote site ETERNUS Disk storage system. Specify it when you display the RAID group information of the remote site ETERNUS Disk storage system.

-csv

Displays the volume information in the CSV format.
If this option is omitted, it is displayed in the table format.

EXAMPLES

NOTES

13.1.2.4 storageadm affinity (AffinityGroup Management Command)

NAME

storageadm affinity - Manages affinity groups

SYNOPSIS

storageadm affinity add -ipaddr ipaddr -volume volume_number[,volume_number,...] [-lun LUN_number] [-affinitygroup affinitygroup_number] [-name alias_name] [-csv]
storageadm affinity delete -ipaddr ipaddr -affinitygroup affinitygroup_number [-s]
storageadm affinity update -ipaddr ipaddr -affinitygroup affinitygroup_number {-add -volume volume_number[,volume_number,...] [-lun LUN_number[,LUN_number,...]] | -delete [-volume volume_number[,volume_number,...] | -lun LUN_number[,LUN_number,...]]} [-s]
storageadm affinity info -ipaddr ipaddr [-affinitygroup affinitygroup_number] [-csv]

COMMAND PATH

Windows Environment
$INS_DIR\ESC\Manager\opt\FJSVssmgr\sbin\storageadm affinity

($INS_DIR means "Program Directory" specified at the ETERNUS SF Manager installation.)

Solaris or Linux Environment
/opt/FJSVssmgr/sbin/storageadm affinity

DESCRIPTION

This command is used to create/delete/modify/display affinity groups in the ETERNUS Disk storage system that is registered with this software.

OPERANDS

add

Creates an affinity group.

delete

Deletes an affinity group.

update

Updates the configuration of an affinity group.

info

Displays the affinity group information.

OPTIONS

Options of "add" Operand
-ipaddr ipaddr

Specify the IP address of the storage device.

-volume volume_number[,volume_number,...]

Specify the numbers of the volumes to be set to an affinity group, using either decimal or hexadecimal notation.
If multiple volume numbers are specified, use commas (",") to separate volume numbers. For example, specify volumes 16, 17 and 18 as either "-volume 16,17,18" in decimal notation or "-volume 0x10,0x11,0x12" in hexadecimal notation.

-lun LUN_number,...

Specify the LUN number to be allocated to the volume, using either decimal or hexadecimal notation. The number of LUN numbers specified must be the same as the number of volumes specified using the -volume option, and the LUN numbers must also be listed in the same order as their corresponding volume numbers.
If multiple LUN numbers are specified, use commas (",") to separate LUN numbers. For example, specify LUN numbers 16, 17 and 18 as either "-lun 16,17,18" in decimal notation or "-lun 0x10,0x11,0x12" in hexadecimal notation.

If this option is omitted, LUN numbers will be allocated in order, starting from 0.

-affinitygroup affinitygroup_number

Specify the affinity group number to be created, using either decimal or hexadecimal notation. For example, specify affinity group number 16 as either "-affinitygroup 16" in decimal or "-affinitygroup 0x10" in hexadecimal.

If this option is omitted, the affinity group numbers that can be created within the target storage device will be allocated automatically.

-name alias_name

Specify an alias for the AffinityGroup to be created.
Only alphanumeric characters (a to z, A to Z and 0 to 9) and the following symbols can be used for aliases: !@#$%^&*()-= `_+|~[]{};:'"./<>?. However, "?" is not supported for ETERNUS DX80 S2/DX90 S2, DX100 S3/DX200 S3, DX400 S2 series, DX500 S3/DX600 S3 and DX8000 S2 series. If the alias contains a space, enclose the entire alias in double quotes (e.g., -name "123 567").

This option must be specified for ETERNUS DX60/DX60 S2/DX80/DX90.

This option can be omitted for ETERNUS DX80 S2/DX90 S2, DX100 S3/DX200 S3, DX400/DX400 S2 series, DX500 S3/DX600 S3 and DX8000/DX8000 S2 series.
If this option is omitted for ETERNUS DX400 series and DX8000 series, alias names are not set.
If this option is omitted for ETERNUS DX80 S2/DX90 S2, DX100 S3/DX200 S3, DX400 S2 series, DX500 S3/DX600 S3 and DX8000 S2 series, alias names are set automatically.

-csv

Displays the created affinity group number in the CSV format.
If this option is omitted, it is displayed in the table format.

Options of "delete" Operand
-ipaddr ipaddr

Specify the IP address of the storage device.

-affinitygroup affinitygroup_number

Specify the number of the affinity group to be deleted, using either decimal or hexadecimal notation. For example, specify affinity group number 16 as either "-affinitygroup 16" in decimal or "-affinitygroup 0x10" in hexadecimal.

-s

Processing continues without the output of a confirmation message.

Options of "update" Operand
-ipaddr ipaddr

Specify the IP address of the storage device.

-affinitygroup affinitygroup_number

Specify the number of the affinity group whose configuration is to be changed, using either decimal or hexadecimal notation. For example, specify affinity group number 16 as either "-affinitygroup 16" in decimal or "-affinitygroup 0x10" in hexadecimal.

-add

Adds volumes in the affinity group.
When the number for the allocated volume/LUN is specified, this command terminates abnormally.

-delete

Deletes volumes from an affinity group.
The command will terminate abnormally if a volume number or LUN number of a volume that has not been mapped is specified, or if deleting the specified mapping will mean that there are no more mappings.

-volume volume_number[,volume_number,...]

Specify the volume number of the volume to be added to or deleted from an affinity group, using either decimal or hexadecimal notation.
If multiple volume numbers are specified, use commas (",") to separate volume numbers. For example, specify volumes 16, 17 and 18 as either "-volume 16,17,18" in decimal notation or "-volume 0x10,0x11,0x12" in hexadecimal notation.

This option cannot be specified together with the -lun option when deleting volumes from an affinity group. Delete volumes by specifying either this option or the -lun option, not both together.

-lun LUN_number[,LUN_number,...]

Specify the LUN number to be allocated to a volume or released from a volume, using either decimal or hexadecimal notation. The number of LUN numbers specified must be the same as the number of volumes specified using the -volume option, and the LUN numbers must also be listed in the same order as their corresponding volume numbers.
If multiple LUN numbers are specified, use commas (",") to separate LUN numbers. For example, specify LUN numbers 16, 17 and 18 as either "-lun 16,17,18" in decimal notation or "-lun 0x10,0x11,0x12" in hexadecimal notation.

If this option is omitted when LUN numbers are being allocated, LUN numbers will be automatically allocated, starting with the smallest free LUN number.

When LUN numbers are being released from volumes, this option cannot be specified together with the -volume option. Release LUN numbers by specifying either this option or the -volume option, but not both together.

-s

Processing continues without the output of a confirmation message.

Options of "info" Operand
-ipaddr ipaddr

Specify the IP address of the storage device.

-affinitygroup affinitygroup_number

Specify the number of the affinity group for which detailed information is to be displayed, using either decimal or hexadecimal notation. For example, specify affinity group number 16 as either "-affinitygroup 16" in decimal or "-affinitygroup 0x10" in hexadecimal.

If this option is omitted, a list of affinity groups will be displayed.

-csv

Displays the affinity group information in the CSV format.
If this option is omitted, it is displayed in the table format.

EXAMPLES

NOTES

13.1.2.5 storageadm ecomode (Eco-mode Management Command)

NAME

storageadm ecomode - Operates the Eco-mode

SYNOPSIS

storageadm ecomode on -ipaddr ipaddr
storageadm ecomode off -ipaddr ipaddr [-s]
storageadm ecomode info -ipaddr ipaddr [-csv]

COMMAND PATH

Windows Environment
$INS_DIR\ESC\Manager\opt\FJSVssmgr\sbin\storageadm ecomode

($INS_DIR means "Program Directory" specified at the ETERNUS SF Manager installation.)

Solaris or Linux Environment
/opt/FJSVssmgr/sbin/storageadm ecomode

DESCRIPTION

This command toggles and displays Eco-mode information for ETERNUS Disk storage systems registered with this product.

OPERANDS

on

Sets the Eco-mode to ON.

off

Sets the Eco-mode to OFF.

info

Displays the Eco-mode status.

OPTIONS

Options of "on" Operand
-ipaddr ipaddr

Specify the IP address of the storage device.

Options of "off" Operand
-ipaddr ipaddr

Specify the IP address of the storage device.

-s

Continues processing without asking for confirmation.

Options of "info" Operand
-ipaddr ipaddr

Specify the IP address of the storage device.

-csv

Displays the Eco-mode status of the ETERNUS Disk storage system in the CSV format.
if this option is omitted, it is displayed in the table format.

EXAMPLES

NOTES

13.1.2.6 storageadm port (Port Management Command)

NAME

storageadm port - Collects a list of port information

SYNOPSIS

storageadm port info -ipaddr ipaddr [-tfo] [-csv]

COMMAND PATH

Windows Environment
$INS_DIR\ESC\Manager\opt\FJSVssmgr\sbin\storageadm port

($INS_DIR means "Program Directory" specified at the ETERNUS SF Manager installation.)

Solaris or Linux Environment
/opt/FJSVssmgr/sbin/storageadm port

DESCRIPTION

This command displays the port information of the ETERNUS Disk storage systems registered with this software.

OPERANDS

info

Displays a list of port information.

OPTIONS

Options of "info" Operand
-ipaddr ipaddr

Specify the IP address of the storage device.

-tfo

Additionally output the following items regarding Storage Cluster:

  • Response address

  • TFO status

-csv

Displays the port information in the CSV format.
If this option is omitted, it is displayed in the table format.

EXAMPLES

NOTES

13.1.2.7 storageadm iscsiport (iSCSI Port Management Command)

NAME

storageadm iscsiport - Operates iSCSI ports

SYNOPSIS

storageadm iscsiport set -ipaddr ipaddr -port portID {[-portipaddr port_ipaddr] [-netmask port_netmask] [-gateway gateway_ipaddr] [-isns iSNS_server_ipaddr] [-iscsi iSCSI name] [-alias alias] [-affinity {on | off}] [-ipv4 {on | off}] [-ipv6localip local_ipaddr] [-ipv6connip connect_ipaddr] [-ipv6gateway v6gateway_ipaddr] [-ipv6 {on | off}]} [-s]
storageadm iscsiport info -ipaddr ipaddr [-port portID [-expand]] [-csv]
storageadm iscsiport ping -ipaddr ipaddr -port portID -target target_ipaddr [-count ping_count] [-csv]

COMMAND PATH

Windows Environment
$INS_DIR\ESC\Manager\opt\FJSVssmgr\sbin\storageadm iscsiport

($INS_DIR means "Program Directory" specified at the ETERNUS SF Manager installation.)

Solaris or Linux Environment
/opt/FJSVssmgr/sbin/storageadm iscsiport

DESCRIPTION

This command displays the iSCSI port settings and information of the ETERNUS Disk storage systems registered with this software.

Specify the storage device IP address and the iSCSI port setting information in the command parameters in order to set the iSCSI port settings and to display the set iSCSI port information and the IP reachability status of the iSCSI network to which the storage device is connected.

OPERANDS

set

Sets iSCSI port information.

info

Displays a list of iSCSI port information.
If -port is specified, detailed information concerning the specified iSCSI port is displayed.
If both -port option and -expand option are specified at the same time, the extended information for iSCSI port is displayed.

ping

Issues a ping to check the IP reachability status of the iSCSI network to which the storage device is connected and displays the result.

OPTIONS

Options of "set" Operand
-ipaddr ipaddr

Specify the IP address of the storage device.

-port portID

Specify the port ID of the iSCSI port.

For ETERNUS DX60/DX60 S2/DX80/DX90, the port ID is the CM number and the port number entered, and for ETERNUS DX80 S2/DX90 S2, DX100 S3/DX200 S3, DX400/DX400 S2 series, DX500 S3/DX600 S3 and DX8000/DX8000 S2 series, the port ID is the CM number, the CA number and the port number entered.

-portipaddr port_ipaddr

Specify the IP address of the iSCSI port.

-netmask port_netmask

Specify the subnet mask of the iSCSI port.

-gateway gateway_ipaddr

Specify the IP address of the gateway server for the iSCSI port.

Specify the following if delete the gateway server setting.

-gateway ""
-isns iSNS_server_ipaddr

Specify the IP address of the iSNS server for the iSCSI port.

Specify the following if delete the iSNS server settings.

-isns ""

If IPv4 configuration for the iSCSI port is invalid, IPv4 address cannot be specified.
If IPv6 configuration for the iSCSI port is invalid, IPv6 address cannot be specified.

-iscsi iSCSI_name

Specify the iSCSI name of the iSCSI port.

Specify the following if you want to set default iSCSI name.

-iscsi ""
-alias alias_name

Specify the alias of the iSCSI port.

-affinity {on | off}

Specify the security setting for the iSCSI port. If set to ON, specify as "-affinity on". If set to OFF, specify as "-affinity off".

-ipv4 {on | off}

Specify IPv4 setting for the iSCSI port. To enable IPv4 setting, specify "-ipv4 on" and to disable it, specify "-ipv4 off". If "-ipv4 off" is specified, IP address, subnet mask and gateway server settings are all deleted from the iSCSI port.

"-ipv4 off" cannot be specified together with the following options and their values:

  • -portipaddr

  • -netmask

  • -gateway

  • -ipv6 off

-ipv6localip local_ipaddr

Set the IPv6 link local address of the iSCSI port.

-ipv6connip connect_ipaddr

Specify the IPv6 connection IP address of the iSCSI port.

When deleting the IPv6 connection IP address setting, specify as below:

-ipv6connip ""
-ipv6gateway v6gateway_ipaddr

Specify the IPv6 gateway address of the iSCSI port.

When deleting the IPv6 gateway address setting, specify as below:

-ipv6gateway ""
-ipv6 {on | off}

Specify IPv6 settings of the iSCSI port. To enable IPv6 settings, specify "-ipv6 on" and to disable it, specify "-ipv6 off". If "-ipv6 off" is specified, IPv6 link local address, IPv6 connected IP address and IPv6 gateway address settings are all deleted from the iSCSI port.

"-ipv6 off" cannot be specified together with the following options and their values:

  • -ipv6localip

  • -ipv6connip

  • -ipv6gateway

  • -ipv4 off

-s

Causes processing to continue without output of a confirmation message.

Options of "info" Operand
-ipaddr ipaddr

Specify the IP address of the storage device.

-port port ID

Displays detailed information concerning the iSCSI ports. If this option is omitted, a list of iSCSI ports is displayed.

For ETERNUS DX60/DX60 S2/DX80/DX90, the port ID is the CM number and the port number entered, and for ETERNUS DX80 S2/DX90 S2, DX100 S3/DX200 S3, DX400/DX400 S2 series, DX500 S3/DX600 S3 and DX8000/DX8000 S2 series, the port ID is the CM number, the CA number and the port number entered.

-csv

Displays the port information in the CSV format.
If this option is omitted, it is displayed in the table format.

-expand

Add the following to iSCSI port information to display:

  • IPv6 link local address

  • IPv6 connection IP address

  • IPv6 gateway

Added information depends on the version of the ETERNUS SF system. Upgrading the version of the ETERNUS SF system may increase displayed information.
This option can be specified only when the -port option is specified.

Options of "ping" Operand
-ipaddr ipaddr

Specify the IP address of the storage device.

-port port ID

Specify the port ID of the iSCSI port.

For ETERNUS DX60/DX60 S2/DX80/DX90, the port ID is the CM number and the port number entered, and for ETERNUS DX80 S2/DX90 S2, DX100 S3/DX200 S3, DX400/DX400 S2 series, DX500 S3/DX600 S3 and DX8000/DX8000 S2 series, the port ID is the CM number, the CA number and the port number entered.

-target target_ipaddr

Specify the IP address of the server that checks the IP reachability status.

-count ping_count

Specify a value between 1 and 10 for the number of pings issued to check the IP reachability status. A failure will be displayed if an error response is returned at least once. A success will be displayed if normal responses are returned for all pings.

If this option is omitted, the ping execution count is 1.

-csv

Displays the port information in the CSV format.
If this option is omitted, it is displayed in the table format.

EXAMPLES

NOTES

13.1.2.8 storageadm progress (Progress Display Command)

NAME

storageadm progress - Displays progress information

SYNOPSIS

storageadm progress volumeformat -ipaddr ipaddr { [-volume volume_number[,volume_number...]] | [-all] } [-csv]

COMMAND PATH

Windows Environment
$INS_DIR\ESC\Manager\opt\FJSVssmgr\sbin\storageadm progress

($INS_DIR means "Program Directory" specified at the ETERNUS SF Manager installation.)

Solaris or Linux Environment
/opt/FJSVssmgr/sbin/storageadm progress

DESCRIPTION

This command displays progress information concerning the formatting of volumes on ETERNUS Disk storage systems registered with this software.

Specify the storage device IP address and the volume number in the command parameters in order to display volume formatting progress information.

OPERANDS

volumeformat

Displays the formatting progress.

OPTIONS

Options of "volumeformat" Operand
-ipaddr ipaddr

Specify the storage device IP address.

-volume volume number[,volume number,...]

Specify the numbers for the volumes to be output, using either decimal or hexadecimal notation.
If multiple volume numbers are specified, use commas (",") to separate volume numbers. For example, specify volumes 10 and 16 as either "-volume 10,16" in decimal notation or "-volume 0xa,0x10" in hexadecimal notation.

This displays formatting progress information (including format completion and formatting not yet being implemented) concerning the specified volume.

An error does not occur if the specified volume does not exist, but information is not displayed for that volume.

If this is omitted, progress information is displayed for all volumes for which formatting is in progress. However, if the -all option is specified, the progress information will include volumes not currently being formatted (formatting completed or not yet implemented).

This option cannot be specified at the same time as the -all option.

-all

Includes information concerning volumes not currently being formatted (formatting completed or not yet implemented) in the display.
If this option is omitted, progress information is displayed only for volumes for which formatting is in progress.

This option cannot be specified at the same time as the -volume option.

-csv

This option displays the formatting progress information in the CSV format.
If this option is omitted, it is displayed in the table format.

The table below shows the contents displayed when different combinations of -volume and -all options are specified.

-volume Option

-all Option

Specified

Not Specified

Specified

(Cannot be specified.)

The display target is the specified volume, and volumes for which formatting is completed or not yet executed are included in the display.

Not specified

The display target is all volumes on the device, and volumes for which formatting is completed or not yet executed are included in the display.

The display target is all volumes on the device, but the display includes only the volumes for which formatting is in progress.

EXAMPLES

NOTES

13.1.2.9 storageadm perfctl (Performance Monitoring Command)

NAME

storageadm perfctl - Performs monitoring operations

SYNOPSIS

storageadm perfctl start -ipaddr ipaddr [-interval time]
storageadm perfctl stop -ipaddr ipaddr
storageadm perfctl status -ipaddr ipaddr

COMMAND PATH

Windows Environment
$INS_DIR\ESC\Manager\opt\FJSVssmgr\sbin\storageadm perfctl

($INS_DIR means "Program Directory" specified at the ETERNUS SF Manager installation.)

Solaris or Linux Environment
/opt/FJSVssmgr/sbin/storageadm perfctl

DESCRIPTION

This command starts and stops performance monitoring for the NetApp FAS Series and displays the performance monitoring status.

OPERANDS

start

Starts performance monitoring.

stop

Stops performance monitoring.

status

Displays the performance monitoring status.

OPTIONS

Options of "start" Operand
-ipaddr ipaddr

Specify the IP address of the storage device.

-interval time

Specify either 10, 30, 60, or 300 (seconds unit) as the performance monitoring interval.
If a value other than 10, 30, 60, or 300 is set, the actual interval is set according to the table below (an error will occur if it is set to a negative value or a value greater than or equal to 2147483648):

Specified Value

Monitoring Interval (in secs)

time = 0

30

0 < time <= 10

10

10 < time <= 30

30

30 < time <= 60

60

60 < time

300

If this option is omitted, monitoring is performed at 30 second intervals.

Options of "stop" Operand
-ipaddr ipaddr

Specify the IP address of the storage device.

Options of "status" Operand
-ipaddr ipaddr

Specify the IP address of the storage device.

EXAMPLES

NOTES

13.1.2.10 storageadm device (Device Management Command)

NAME

storageadm device - Operation of devices

SYNOPSIS

storageadm device unlock -ipaddr ipaddr [-s]

COMMAND PATH

Windows Environment
$INS_DIR\ESC\Manager\opt\FJSVssmgr\sbin\storageadm device

($INS_DIR means "Program Directory" specified at the ETERNUS SF Manager installation.)

Solaris or Linux Environment
/opt/FJSVssmgr/sbin/storageadm device

DESCRIPTION

This command unlocks the storage device.

OPERANDS

unlock

Unlocks the storage device.

OPTIONS

Options of "unlock" Operand
-ipaddr ipaddr

Specify the IP address of the storage device.

-s

Continues the processing without a confirmation message being output.

EXAMPLES

NOTES

PreviousNext
Copyright 2013-2014 FUJITSU LIMITED