This chapter explains the registration of resources to resource pools.
Use the following procedure to register a resource to a resource pool:
Register Physical Server Resources
Register physical servers to the server pool.
For details, refer to "14.2 Physical Server Resources" in the "User's Guide for Infrastructure Administrators (Resource Management) CE".
Register Network Resources
If network resources are connected when creating an L-Server, LAN switch blades will be registered automatically as the physical server that the L-Server will operate on. If an image is specified, the IP address is configured.
For details, refer to "B.3.1 Automatic Network Configuration".
In the ROR console orchestration tree, right-click the target network pool, and select [Create Network Resource].
When creating a new network resource, select [New].
When creating a resource using an already registered admin LAN subnet, select [Using existing admin subnet].
The [Create a network resource] dialog is displayed.
Enter the items necessary for network resources.
For details, refer to "14.3 Network Resources" in the "User's Guide for Infrastructure Administrators (Resource Management) CE".
Note
When the destination of a physical L-Server is a PRIMERGY BX920 series or BX922 series server and LAN switch blades PY-SWB104 (PG-SW109) or PY-SWB101 (PG-SW201) are mounted in CB1 and CB2, only NIC1 and NIC2 can be used.
Register Network Device Resources
For details on how to register network device resources, refer to "14.4 Network Devices" in the "User's Guide for Infrastructure Administrators (Resource Management) CE".
Register Storage Resources
The procedure differs depending on the storage resources to use.
When using virtual storage resources or disk resources created in advance
For details, refer to "14.5 Storage Resources" in the "User's Guide for Infrastructure Administrators (Resource Management) CE".
When using iSCSI boot
Execute the operation command for iSCSI boot (rcxadm iscsictl register) to register the resources.
For details on the rcxadm iscsictl register command, refer to "5.10 rcxadm iscsictl" in the "Reference Guide (Command/XML) CE".
Register Address Set Resources
For WWNs and MAC addresses, address set resources must be created and registered to the address pool.
Execute the rcxadm addrset create command to register WWNs and MAC addresses to the address pool.
For details on the rcxadm addrset create command, refer to "3.1 rcxadm addrset" in the "Reference Guide (Command/XML) CE".
