Registration of resources when creating a physical L-Server using a blade server is explained.
Register using the following procedure:
Registering VIOM Coordination
Refer to "5.1 Registering VIOM Coordination" in the "User's Guide for Infrastructure Administrators (Resource Management) CE".
Note
It is not necessary to register a VIOM server profile.
When creating a physical L-Server, VIOM server profiles are automatically created.
Register Storage Management Software
When storage management software is registered, RAID groups or aggregates that were created during pre-setup preparations are automatically registered in Resource Orchestrator as virtual storage resources.
Execute the rcxadm storagemgr register command to register storage management software with Resource Orchestrator.
For details on the rcxadm storagemgr register command, refer to "5.17 rcxadm storagemgr" in the "Reference Guide (Command/XML) CE".
Register Chassis
Refer to "5.4.1 Registering Chassis" in the "User's Guide for Infrastructure Administrators (Resource Management) CE".
Register Managed Servers (within Chassis)
Refer to "5.4.2 Registering Blade Servers" or "5.5.1 Registering Rack Mount or Tower Servers" in the "User's Guide for Infrastructure Administrators (Resource Management) CE".
When performing admin LAN NIC redundancy and registering a physical server, check the [Use Admin LAN redundancy] checkbox in the "Register Server" dialog when registering the server.
When directly specifying an IP address during physical L-Server creation, do not configure the same IP address on a managed server.
An error will occur during the following operations, if there are managed servers configured with the same IP addresses as those allocated to physical L-Servers, in other than physical servers.
Creation of physical L-Servers
Starting of a physical L-Server for which only the configuration definition has been created
Note
When not using the default NIC, specify the NIC for admin LAN during the physical server registration.
For details, refer to the "[Apply Admin LAN NIC settings] checkbox" in "5.4.2 Registering Blade Servers" in the "User's Guide for Infrastructure Administrators (Resource Management) CE".
Register LAN Switch Blades
Refer to "5.4.3 Registering LAN Switch Blades" and "5.13 Registering LAN Switches" in the "User's Guide for Infrastructure Administrators (Resource Management) CE".
Register Network Device Resources
For details on how to register network device resources, refer to "5.7.2 Registering Network Devices" in the "User's Guide for Infrastructure Administrators (Resource Management) CE".
Register Power Monitoring Devices (when Using Devices)
Refer to "5.10 Registering Power Monitoring Devices" in the "User's Guide for Infrastructure Administrators (Resource Management) CE".
To register a network resource or an address set resource, specify a resource pool when creating the resource.
Refer to "B.3 Registering Resources in Resource Pools".
