The section describes the upgrade of clustered systems.
The operational environment must be prepared prior to upgrading the AdvancedCopy Manager Copy Control Module, as described below.
Check that the CCM Server transactions are stopped on the secondary node.
If not stopped, stop the transaction for AdvancedCopy Manager Copy Control Module.
Refer to the relevant cluster software manuals for stopping the CCM Server transaction.
Stop the CCM Server transaction on the primary node.
The shared disk for shared data of AdvancedCopy Manager Copy Control Module must be mounted.
Refer to the relevant cluster software manuals for stopping the CCM Server transaction.
Back up the environment and data.
On the primary and secondary nodes, back up the operating system.
On the primary node, back up the shared disk for shared data of AdvancedCopy Manager Copy Control Module.
Point
If a failure occurs during the upgrade, you cannot restore the environment to the pre-installation status (rollback). Therefore, it is recommended to back up the following before performing the upgrade.
Operating system
Shared disk for shared data of AdvancedCopy Manager Copy Control Module
If a failure occurs during the upgrade and you want to restore the environment to the pre-installation status, restore the system from the backup.
The following describes the upgrade procedure for the primary node.
Log in to the server as a superuser.
Insert the DVD-ROM "ETERNUS SF SC/ACM Mediapack for Solaris (Manager Program) (2/2)", "ETERNUS SF SC/ACM/Express Mediapack for Linux (Manager Program) (2/2)" or "ETERNUS SF SC/ACM/Express Mediapack for Linux 64bit (Manager Program) (2/2)" for this version into the DVD-ROM drive.
Refer to "DVD-ROM contents" in the ETERNUS SF Installation and Setup Guide for this version for information on the DVD-ROM structure and detailed contents.
Mount the DVD-ROM (if automount is not enabled).
Example:
# mount /mnt/dvd
Change the directory on the DVD-ROM where the installation shell script is stored.
Example:
# cd /mnt/dvd/Manager_unix
Execute the following installation shell script:
# ./esfinstall.sh
The license agreement information will be displayed. Display example is mentioned below.
If the conditions are agreeable, enter "y".
License Agreement
Subject to the acceptance of the terms and conditions contained in this License Agreement
("Agreement"), Fujitsu Limited ("Fujitsu") grants to customers the license to use the obje
ct product as permitted hereunder.
This Agreement certifies the license to the ETERNUS SF Storage Cruiser / AdvancedCopy Mana
ger / Express ("Object Product") as permitted hereunder and your acceptance of the terms a
nd conditions hereof.
1. INSTALLATION
You are allowed to install and use manager module and agent module of the Object Product o
n any computer connected to the Storage Device directly or through network and you are als
o allowed to install and use client module of the Object Product on any computer.
2. ARCHIVAL COPY
You may make one (1) archival copy of the Object Product.
3. EMBEDDING
If the Object Product is expected to be used as embedded in another program, you may embed
the Object Product, in whole or in part, in such other program, in accordance with the pr
ocedure described in the applicable documentation.
4. NO ASSIGNMENT
You may not rent, lease, sublicense, assign, transfer or create lien against the Object Pr
oduct.
5. MODIFICATION
You may not modify or, except to the extent expressly permitted by applicable law, reverse
engineer (including, without limitation, decompile and disassemble) the Object Product, a
nd you may not permit others to do so.
6. LIMITED WARRANTY
(a) You acknowledge that Fujitsu cannot guarantee that your use of the Object Product will
be uninterrupted, that the Object Product will be error free or that all Product errors w
ill be corrected. However, if within ninety (90) days following your acquisition of the Ob
ject Product you notify the reseller from which you have acquired the Object Product of ph
ysical defects of the media containing the Object Product, Fujitsu will, at its sole discr
etion, correct the non-conformance or provide you with information necessary to correct th
e non-conformance, or replace the defective media with a new media. Only if you inform suc
h reseller of your problem with the Object Product during the above mentioned warranty per
iod and provide satisfactory evidence of the date you acquired the Object Product will Fuj
itsu be obligated to honor this warranty.
(b) THIS IS A LIMITED WARRANTY AND IT IS THE ONLY WARRANTY MADE BY FUJITSU. FUJITSU MAKES
NO OTHER WARRANTY, EXPRESS OR IMPLIED, AND EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTY OF MER
CHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT OF THIRD PARTIES' RIGHTS
. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES, SO LIMITATION MAY N
OT APPLY TO YOU. NO FUJITSU RESELLER, AGENT, EMPLOYEE IS AUTHORIZED TO MAKE ANY MODIFICATI
ONS, EXTENSIONS, OR ADDITIONS TO THIS WARRANTY. IF ANY MODIFICATIONS ARE MADE TO THE OBJEC
T PRODUCT BY YOU DURING THE WARRANTY PERIOD, IF THE MEDIA IS SUBJECTED TO ACCIDENT, ABUSE,
OR IMPROPER USE, OR IF YOU VIOLATE THE TERMS AND CONDITIONS HEREOF, THEN THIS WARRANTY SH
ALL IMMEDIATELY BE TERMINATED.
(c) LIMITATION OF LIABILITY. UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL THEORY, TORT, CONTR
ACT, OR OTHERWISE, SHALL FUJITSU BE LIABLE TO YOU OR ANY OTHER PERSON FOR ANY INDIRECT, SP
ECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY CHARACTER, INCLUDING, WITHOUT LIMITATIO
N, DAMAGES FOR LOSS OF GOODWILL, WORK STOPPAGE, OR LOSS OF DATA, OR FOR ANY DAMAGES IN EXC
ESS OF THE LIST PRICE TO THE PRODUCT, EVEN IF FUJITSU SHALL HAVE BEEN INFORMED OF THE POSS
IBILITY OF SUCH DAMAGES, OR FOR ANY CLAIM BY ANY OTHER PARTY. THIS LIMITATION OF LIABILITY
SHALL NOT APPLY TO LIABILITY FOR DEATH OR PERSONNEL INJURY TO THE EXTENT APPLICABLE LAW P
ROHIBITS SUCH LIMITATION. FURTHERMORE, SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LI
MITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THIS LIMITATION AND EXCLUSION MAY NOT
APPLY TO YOU.
(d) The above states the entire liability of Fujitsu in connection with the use, performan
ce or non-performance of the Object Product.
(e) Even if a part of the Object Product has been developed by a third party, the warranty
and remedy for that part of the Object Product are limited to those provided for in this
Section, and the third party developer shall have no liability in connection with the use,
performance or non-conformance of the Object Product.
7. MISCELLANEOUS
(a) The terms and conditions hereof represent the complete agreement concerning this licen
se between the parties and supersede all prior or contemporaneous oral and written communi
cations between them. In the event that any additional terms or conditions are provided in
the accompanied documentation, you must also comply with such terms and conditions.
(b) You agree to comply with all applicable export laws and regulations.
(c) Use, duplication or disclosure of the Object Product by the U.S. Government is subject
to restrictions set forth in subparagraph (a) through (b) of the Commercial Computer-Rest
ricted Rights clause at FAR 52.227 - 19 when applicable, or in subparagraphs (c)(1) and (2
) of the Rights in Technical Data and Computer Software clause at DFAR 252.227 - 7013, and
in similar clauses in the NASA FAR Supplement. Contractor/manufacturer is Fujitsu Limited
, 1-1, Kamikodanaka 4-chome, Nakahara-ku, Kawasaki-shi, Kanagawa-ken 211-8588, Japan.
Do you accept the terms of the above License Agreement? (default: n) [y,n]:The following upgrade message will be displayed.
To continue the upgrade, enter "y". To discontinue, enter "q".
Do you want to upgrade? [y,q]:
If the upgrade completes successfully, the following message is displayed.
INFO: ETERNUS SF was installed successfully.
Change to a directory other than the DVD-ROM.
Example:
# cd
Unmount the DVD-ROM.
Example:
# umount /mnt/dvd
Eject the DVD-ROM.
Point
If the upgrade was terminated abnormally, refer to "Corrective actions to be taken when any error occurs in version upgrade from 15.x (for Solaris, Linux)" in the Software Release Guide, recover the system to the normal status.
When the upgrade has been completed, the tasks below need to be performed:
For the ETERNUS SF Manager Version 15.0B installed environment, perform the following procedure.
Edit the stxs_etcdir information within the AdvancedCopy Manager CCM environment setting file (/opt/FJSVccm/micc/sys/.install.sys) as follows:
Before | After |
|---|---|
stxs_etcdir=previousDir | stxs_etcdir=upgradedDir (*1) |
*1: Specify the value of stxs_etcdir set to the /opt/FJSVccm/noncluster/micc/sys/.install.sys file for upgradedDir.
Note
Do not change anything other than the stxs_etcdir line in the /opt/FJSVccm/micc/sys/.install.sys file.
The /opt/FJSVccm/noncluster/micc/sys/.install.sys file is for reference only, do not edit.
Perform the upgrade for the secondary node.
The upgrade procedure is the same as that for the primary node. Refer to "7.7.2.2 Performing the upgrade (Primary node)".
The required procedure after performing the upgrade for the secondary node is the same as that for the primary node. Refer to "7.7.2.3 Tasks to be performed after the upgrade (Primary node)".
When the upgrade is complete, start the CCM Server transactions.
Refer to the relevant cluster software manuals for starting the CCM Server transaction.