4.1.4 Tasks to be performed after the upgrade

Refer to the following locations in the ETERNUS SF Storage Cruiser Operation Guide to restore the operational environment that was backed up in "4.1.1.1 Backing up the operational environment of the previous version".

For Windows:
1. Execute the following batch file to stop the service of ETERNUS SF Manager:
```
installDir\Common\bin\Stop_ESFservice.bat
```
2. Perform steps 5 to 11 in "Restoring Windows Manager". In step 5, perform "Upgrade from a previous version".
3. Execute the following batch file to restart the service of ETERNUS SF Manager:
```
installDir\Common\bin\Start_ESFservice.bat
```
For Solaris or Linux:
1. Execute the shell script below to stop the daemon of ETERNUS SF Manager.
  An error will occur if you execute the shell script before the start up of the ETERNUS SF Manager daemon, which is started automatically during installation, is completed. If an error occurs, wait and then try again.
```
/opt/FJSVesfcm/bin/stopesf.sh
```
2. Perform steps 5 to 11 in "Restoring Solaris OS Manager". In step 5, perform "Upgrade from a previous version".
3. Execute the shell script below to restart the daemon of ETERNUS SF Manager.
```
/opt/FJSVesfcm/bin/startesf.sh
```

AdvancedCopy Manager operational environment

When AdvancedCopy Manager is installed, restore the operational environment that was backed up in "4.1.1.1 Backing up the operational environment of the previous version".

Note

For the operational environment restore, start a new window for command execution, and then perform the procedure on the window.

See

Refer to the following table to restore the operational environment.

Server type	OS	Reference
Management Server	Windows	A.9 Restoring the repository data (for Windows)
Management Server	Solaris, Linux	A.10 Restoring the repository data (for Solaris, Linux)
Management Server which also serves as a Managed Server	Windows	Perform the steps in the following order: A.9 Restoring the repository data (for Windows) A.11 Restoring the management information (for Windows)
Management Server which also serves as a Managed Server	Solaris, Linux	Perform the steps in the following order: A.10 Restoring the repository data (for Solaris, Linux) A.12 Restoring the management information (for Solaris, Linux)

AdvancedCopy Manager Copy Control Module operational environment

When AdvancedCopy Manager Copy Control Module is installed, restore the operational environment that was backed up in "4.1.1.1 Backing up the operational environment of the previous version".

See

Refer to "A.14 Restoring the environment setting files" for information on performing a restore.

License information

When AdvancedCopy Manager and/or AdvancedCopy Manager Copy Control Module are installed, restore the definition of the license information.

Restore the license management database of ETERNUS SF License Manager by executing the esflm restore command. Refer to the ETERNUS SF Installation and Setup Guide for this version for information on the command.

Example of executing the command is shown below. The backupFileName is the file name specified when the backup data was created.

> esflm restore backupFileName
Restoration of license database was performed successfully

4.1.4.2 Importing the configuration information

Import the configuration information from the previous version by executing the esfimportdevconf command using Administrator permissions.

Check that the targeted devices can be accessed before executing the esfimportdevconf command.

For Windows (DOS prompt):
```
programDir\Common\bin\esfimportdevconf
```
For Solaris or Linux:
```
# /opt/FJSVesfcm/bin/esfimportdevconf
```

After executing the esfimportdevconf command, confirm that "Complete" is displayed in IMPORT STATUS column in the esfimportdisplay command of the configuration information import.

See

Refer to "9.2 Command references" for information on each import command.

4.1.4.3 Setting up a user account

Set up a user account in order to use the ETERNUS SF Manager functions.

See

Refer to "Setting up user account" in the ETERNUS SF Installation and Setup Guide for this version for information on setup.

4.1.4.4 Setting up the Web Console

If firewalls are used between the PC on which the Web Console is launched and the Management Server, perform firewall settings to allow transmission.

See

Refer to "Setting up for using Web Console" in the ETERNUS SF Installation and Setup Guide for this version for information on firewall setup.

4.1.4.5 Setting the account information for access to ETERNUS Disk storage system

Set the account information, user name and password to access the ETERNUS Disk storage system.

See

Refer to "Set and change the information of the account that can access ETERNUS Disk storage system" in the ETERNUS SF Web Console Guide for information on setup.

4.1.4.6 Registering the license

See

Refer to "License Management" in the ETERNUS SF Installation and Setup Guide for this version for information on the license settings.

4.1.4.7 Redefining missing information

iSCSI HBA information
If iSCSI was defined before the upgrade, perform the following procedure:
1. Log in to the Web Console.
2. Select the server featuring the iSCSI HBA, click Add HBA in the Action pane and then enter the HBA information.
AdvancedCopy Manage Copy Control Module configuration information
To use the AdvancedCopy Manager Copy Control Module, set the device information again in accordance with the following procedure:
See
Refer to "Commands" in the ETERNUS SF Operation Guide for Copy Control Module for this version for information on the commands.
1. Confirm the registered ETERNUS Disk storage system by executing the acarray list command.
```
C:\>C:\ETERNUS_SF\CCM\bin\acarray list
Name BOX-ID IP Address
----- ---------------------------------------- ------------
DX90 00ETERNUSDXL##ET09E24B####LH4311015511## 10.124.6.251
```
2. Confirm the detailed information of the registered ETERNUS Disk storage system by executing the acarray detail command.
```
C:\>C:\ETERNUS_SF\CCM\bin\acarray detail -a DX90
Disk Array Name : DX90
BOX-ID : 00ETERNUSDXL##ET09E24B####LH4311015511##
IP Address : 10.124.6.251
Admin User : ****
Access Volume : X:
```
3. Remove all of the registered ETERNUS Disk storage system by executing the acarray remove command.
```
C:\>C:\ETERNUS_SF\CCM\bin\acarray remove -a DX90
Successful completion.
```
4. Re-register all of the ETERNUS Disk storage systems that were removed in step 3 by executing the acarray add command.
```
C:\>C:\ETERNUS_SF\CCM\bin\acarray add -a DX90 -ip 10.124.6.251 -user **** -password **** -path X:
Successful completion.
```
  Point
  When the ETERNUS Disk storage system was registered by specifying a nonexistent drive letter or device name in the previous version of AdvancedCopy Manager CCM, re-register its ETERNUS Disk storage system as a remote device.
5. Reload the configuration information
  See
  Refer to "Reload ETERNUS Disk storage system configuration information" in the ETERNUS SF Web Console Guide for this version for information on reloading the configuration information.