3.3 Installation procedure of ETERNUS SF Manager (for Solaris)

The following two installation methods of ETERNUS SF Manager for Solaris are available:

Default install
Install ETERNUS SF Manager by using the default values described in "D.2 Install parameters (for ETERNUS SF Manager)".
Custom install
Install ETERNUS SF Manager by using the modified default values of the installation information (port number for the communications service, character code, and so on).
Define the installation information to the install parameter file. Specify the install parameter file to which the installation information has been defined when executing the install shell.
Refer to "D.1 Install parameter file (for ETERNUS SF Manager)" for information on the install parameter file.
Refer to "D.2 Install parameters (for ETERNUS SF Manager)" for information on the install parameter.

The installation procedure of ETERNUS SF Manager for Solaris is performed as follows:

Note

Perform the following operation before installing ETERNUS SF Manager.
- Check and make sure that the system is set to use a shadow password.
- Register the user who performs the database access for repository to the operation system.
  Refer to "3.1.5 Registering the repository access user (for Solaris and Linux)" for details.
You cannot change the install directory during the installation.
Do not rename, change, and delete the install directory after the installation.
When Symfoware has already been installed, perform the following procedure:
1. Stop the process of Symfoware/RDB, WebDBtools, and RDA-SV temporarily.
2. Install ETERNUS SF Manager (for Solaris).
3. Restart the process of Symfoware/RDB, WebDBtools, and RDA-SV.
In the process of the installation, a user account "esfpostgres" is created on the operating system. This account is internally used by the ETERNUS SF system.
Do not change and delete this account because it is necessary to operate the ETERNUS SF system.

Log in to the server as a superuser.
Make sure that the local file system is mounted.
If the local file system is not mounted, execute the following command to mount the local file system:
```
# /usr/sbin/mountall -l
```
Insert the DVD-ROM "ETERNUS SF SC/ACM Mediapack for Solaris (Manager Program) (2/2)" for this version into the DVD-ROM drive.
Mount the DVD-ROM.
In the following command execution example, the device name of DVD-ROM drive is /dev/dsk/c0t4d0s0. The device name for the DVD-ROM drive, however, may be different for your particular device.
```
# mount -F hsfs -o ro /dev/dsk/c0t4d0s0 dvdromMountPoint
```
Change directory in which the install shell is stored.
```
# cd dvdromMountPoint/Manager_unix
```
Execute the install shell.
- For default install:
```
# ./esfinstall.sh
```
- For custom install:
  Specify the absolute path name of the install parameter file edited in advance for installParamFile.
```
# ./esfinstall.sh -s installParamFile
```

The license agreement information will be displayed. Display example is mentioned below.
If the conditions are agreeable, enter "y".

+--------------------------------------------------------------+
| ETERNUS SF V15.3 |
| |
| All Rights Reserved, Copyright (C) FUJITSU LIMITED 2012-2013 |
+--------------------------------------------------------------+

License Agreement

Subject to the acceptance of the terms and conditions contained in this License Agreement
("Agreement"), Fujitsu Limited ("Fujitsu") grants to customers the license to use the obje
ct product as permitted hereunder.

This Agreement certifies the license to the ETERNUS SF Storage Cruiser / AdvancedCopy Mana
ger / Express ("Object Product") as permitted hereunder and your acceptance of the terms a
nd conditions hereof.

1. INSTALLATION
You are allowed to install and use manager module and agent module of the Object Product o
n any computer connected to the Storage Device directly or through network and you are als
o allowed to install and use client module of the Object Product on any computer.

2. ARCHIVAL COPY
You may make one (1) archival copy of the Object Product.

3. EMBEDDING
If the Object Product is expected to be used as embedded in another program, you may embed
the Object Product, in whole or in part, in such other program, in accordance with the pr
ocedure described in the applicable documentation.

4. NO ASSIGNMENT
You may not rent, lease, sublicense, assign, transfer or create lien against the Object Pr
oduct.

5. MODIFICATION
You may not modify or, except to the extent expressly permitted by applicable law, reverse
engineer (including, without limitation, decompile and disassemble) the Object Product, a
nd you may not permit others to do so.

6. LIMITED WARRANTY
(a) You acknowledge that Fujitsu cannot guarantee that your use of the Object Product will
be uninterrupted, that the Object Product will be error free or that all Product errors w
ill be corrected. However, if within ninety (90) days following your acquisition of the Ob
ject Product you notify the reseller from which you have acquired the Object Product of ph
ysical defects of the media containing the Object Product, Fujitsu will, at its sole discr
etion, correct the non-conformance or provide you with information necessary to correct th
e non-conformance, or replace the defective media with a new media. Only if you inform suc
h reseller of your problem with the Object Product during the above mentioned warranty per
iod and provide satisfactory evidence of the date you acquired the Object Product will Fuj
itsu be obligated to honor this warranty.

(b) THIS IS A LIMITED WARRANTY AND IT IS THE ONLY WARRANTY MADE BY FUJITSU. FUJITSU MAKES
NO OTHER WARRANTY, EXPRESS OR IMPLIED, AND EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTY OF MER
CHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT OF THIRD PARTIES' RIGHTS
. SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES, SO LIMITATION MAY N
OT APPLY TO YOU. NO FUJITSU RESELLER, AGENT, EMPLOYEE IS AUTHORIZED TO MAKE ANY MODIFICATI
ONS, EXTENSIONS, OR ADDITIONS TO THIS WARRANTY. IF ANY MODIFICATIONS ARE MADE TO THE OBJEC
T PRODUCT BY YOU DURING THE WARRANTY PERIOD, IF THE MEDIA IS SUBJECTED TO ACCIDENT, ABUSE,
OR IMPROPER USE, OR IF YOU VIOLATE THE TERMS AND CONDITIONS HEREOF, THEN THIS WARRANTY SH
ALL IMMEDIATELY BE TERMINATED.

(c) LIMITATION OF LIABILITY. UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL THEORY, TORT, CONTR
ACT, OR OTHERWISE, SHALL FUJITSU BE LIABLE TO YOU OR ANY OTHER PERSON FOR ANY INDIRECT, SP
ECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY CHARACTER, INCLUDING, WITHOUT LIMITATIO
N, DAMAGES FOR LOSS OF GOODWILL, WORK STOPPAGE, OR LOSS OF DATA, OR FOR ANY DAMAGES IN EXC
ESS OF THE LIST PRICE TO THE PRODUCT, EVEN IF FUJITSU SHALL HAVE BEEN INFORMED OF THE POSS
IBILITY OF SUCH DAMAGES, OR FOR ANY CLAIM BY ANY OTHER PARTY. THIS LIMITATION OF LIABILITY
SHALL NOT APPLY TO LIABILITY FOR DEATH OR PERSONNEL INJURY TO THE EXTENT APPLICABLE LAW P
ROHIBITS SUCH LIMITATION. FURTHERMORE, SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LI
MITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THIS LIMITATION AND EXCLUSION MAY NOT
APPLY TO YOU.

(d) The above states the entire liability of Fujitsu in connection with the use, performan
ce or non-performance of the Object Product.

(e) Even if a part of the Object Product has been developed by a third party, the warranty
and remedy for that part of the Object Product are limited to those provided for in this
Section, and the third party developer shall have no liability in connection with the use,
performance or non-conformance of the Object Product.

7. MISCELLANEOUS
(a) The terms and conditions hereof represent the complete agreement concerning this licen
se between the parties and supersede all prior or contemporaneous oral and written communi
cations between them. In the event that any additional terms or conditions are provided in
the accompanied documentation, you must also comply with such terms and conditions.

(b) You agree to comply with all applicable export laws and regulations.

(c) Use, duplication or disclosure of the Object Product by the U.S. Government is subject
to restrictions set forth in subparagraph (a) through (b) of the Commercial Computer-Rest
ricted Rights clause at FAR 52.227 - 19 when applicable, or in subparagraphs (c)(1) and (2
) of the Rights in Technical Data and Computer Software clause at DFAR 252.227 - 7013, and
in similar clauses in the NASA FAR Supplement. Contractor/manufacturer is Fujitsu Limited
, 1-1, Kamikodanaka 4-chome, Nakahara-ku, Kawasaki-shi, Kanagawa-ken 211-8588, Japan.

Do you accept the terms of the above License Agreement? (default: n) [y,n]:

The installation information will be displayed. Display example is mentioned below.
To continue installation, enter "y". To stop the installation, enter "q".

Setting of installation parameter file.

    Installation_function:      ETERNUS SF Manager

    Character_code:        EUC 

    Port number
      ETERNUS_SF_Manager_apache_service: 9855
      Communications_service_1:          1226
      Communications_service_2:          4917
      Repository_service_1:              32004
      Repository_service_2:              15432
      Remote_access_service:             9851
      Exclusive_control_service:         9852
      Internal_port_1:                   28005
      Internal_port_2:                   28009
      Internal_port_3:                   28443
      Internal_port_4:                   24916
      Internal_port_5:                   24917
    Repository database setup
      DB_file_directory:             /var/opt/FJSVswstf/sfwswstf/db
      RDB_dictionary_directory:      /var/opt/FJSVswstf/sfwswstf/dic
      RDB_log_file_directory:        /var/opt/FJSVswstf/sfwswstf/log
      Repository_DB_space_directory: /var/opt/FJSVswstf/sfwswstf/dbsp
      Repository_data_size:          65
      Management_server_IP_address:
    AdvancedCopy_Manager_ARCH:  32bit
    esfpostgres_UID:

Do you want to continue the installation? [y,q]:

After installation is completed successfully, the following message will be displayed.
INFO: ETERNUS SF was installed successfully.
If an error occurs during installation, the following message will be displayed and no software that configures ETERNUS SF Manager are installed.
- When port numbers are overlapping.
  ERROR: The specified port number is duplicate with following service.: foo 9855/tcp ERROR: Installation has failed.
  Way of handling: Set the install parameter file not to overlap the port number and perform the custom install (Refer to step 7).
- When FJSVccm, for example, is already installed.
  ERROR: The following product has been already installed on this system.: ETERNUS SF AdvancedCopy Manager Copy Control Module ERROR: Installation has failed.
  Way of handling: Uninstall the installed software (In this case, FJSVccm).
Change directory into other than DVD-ROM. The example is shown below.
# cd
Unmount the DVD-ROM.
# umount dvdromMountPoint
Eject the DVD-ROM.

The ETERNUS SF Manager (for Solaris) installation is completed.

Point

Even after the database is created, keep using a shadow password and continue the operation.
If an IP address for Management Server is not specified in the install parameter file, the IP address for Management Server is set automatically during the installation. After the installation is completed, change the IP address if required. For the information on how to change an IP address, refer to "Changing the IP address of Management Server" in the ETERNUS SF AdvancedCopy Manager Operation Guide (for Solaris).
The user information registered in "3.1.5 Registering the repository access user (for Solaris and Linux)" is set automatically as the user who performs the database access for repository. After the installation is completed, change the user information if required. Refer to "Change of password or deletion of the user who was specified as the repository access user" in the ETERNUS SF AdvancedCopy Manager Operation Guide (for Solaris) for information on how to change the user information.