Follow the steps below to install a Systemwalker Centric Manager Operation Management Server:
1. Stop Systemwalker Runbook Automation and install Systemwalker Centric Manager
If the Systemwalker Runbook Automation Management Server, then stop it.
Refer to "4.1.2 Stopping Systemwalker Runbook Automation" for details.
Enable auto-start of service.
[Windows]
Using Windows(R) service function, change Startup type of the following manual to auto.
Systemwalker MpAosfB
Systemwalker MpAosfP
Systemwalker MpAosfX
Stop Interstage.
Method 1: Via the Interstage Management Console.
Method 2: Via the command line:
[Windows]
C:\> isstop -f
[Linux]
# isstop -f
Install a Systemwalker Centric Manager Operation Management Server.
Refer to the Systemwalker Centric Manager Installation Guide for details.
Restart the computer.
Perform steps 1 and 2 again.
2. Create an environment and start Systemwalker Centric Manager
Create an environment for Systemwalker Centric Manager.
[Windows]
Note
Environments in which a Systemwalker Runbook Automation Management Server has been installed already have an ObjectDirector environment, so there is no need to recreate it. Refer to the Systemwalker Centric Manager User's Guide - Running Interstage, Symfoware and ObjectDirector for details (provided from Systemwalker CentricMGR V10.0L20 and later).
Start the Operation Environment Maintenance Wizard.
Select "Create Operation Environment" to create a Systemwalker Centric Manager environment.
(Click No when prompted to confirm whether to rebuild the environment)
Start the Systemwalker Centric Manager service:
C:\><Systemwalker Centric Manager installation directory>\MPWALKER.DM\bin\scentricmgr
[Linux]
Set up Systemwalker Centric Manager:
# /opt/systemwalker/bin/MpFwSetup -mix
In the setup menu, enter "1" to create a Systemwalker Centric Manager environment.
In the Connection environment check result window, enter "2" to continue processing without recreating the Systemwalker Centric Manager environment.
In the setup menu, enter "3" to start each daemon for Systemwalker Centric Manager.
3. Start Interstage and Systemwalker Runbook Automation
Start Interstage.
Method 1: Via the Interstage Management Console.
Method 2: Via the command line:
[Windows]
C:\> isstop -f
[Linux]
# isstop -f
Start the Systemwalker Runbook Automation Management Server:
swrba_start
If a Management Server has been set up, then start it. Refer to "4.1.1 Starting Systemwalker Runbook Automation" for details.
