Error Type
ERROR
Output to event logs or syslogs
Yes
Description
You do not have the privileges required to execute this command.
Action method
Execute the command as a user with administrator privileges.
Error Type
ERROR
Output to event logs or syslogs
Yes
Description
An environment for Systemwalker Software Configuration Manager has not been created.
Action method
Systemwalker Software Configuration Manager has not been set up. Perform the setup or, if it is underway, wait for it to finish and then execute the command again.
Error Type
ERROR
Output to event logs or syslogs
Yes
Description
Processing cannot be executed because another command is executing.
Action method
Wait until the command finishes, and then execute it again.
Error Type
ERROR
Output to event logs or syslogs
Yes
Description
The specified command options are invalid.
Action method
Enter the command correctly.
Error Type
ERROR
Output to event logs or syslogs
No
Description
The file cannot be opened.
Parameters
Action method
Check the file at the path displayed.
Error Type
ERROR
Output to event logs or syslogs
No
Description
An error has occurred with the startup processing.
Action method
Contact Fujitsu technical support.
Error Type
ERROR
Output to event logs or syslogs
No
Description
An error has occurred with the stop processing.
Action method
Contact Fujitsu technical support.
Error Type
ERROR
Output to event logs or syslogs
Yes
Description
Systemwalker Software Configuration Manager has not been set up.
Action method
Systemwalker Software Configuration Manager has not been set up. Perform the setup or, if it is underway, wait for it to finish and then execute the command again.
Error Type
INFO or ERROR
Output to event logs or syslogs
Yes
Description
Systemwalker Software Configuration Manager is not running.
Action method
If the status display command (swcfmg_status) has been executed, no action is required.
If this message is displayed with a command other than the status display command, execute the start command (swcfmg_start) to start Systemwalker Software Configuration Manager.
Error Type
ERROR
Output to event logs or syslogs
No
Description
The specified output destination path is incorrect.
Action method
Either create the output path or review the privileges.
When specifying the output path that includes the current directory, specify the current directory as ".\" in Windows or "./" in Linux.
Error Type
ERROR
Output to event logs or syslogs
No
Description
The specified output destination path already contains files or directories.
Action method
Delete the file or directory at the output path.
Error Type
ERROR
Output to event logs or syslogs
No
Description
The specified output destination path is not writable.
Action method
Change the privileges for the output path.
Error Type
ERROR
Output to event logs or syslogs
No
Description
An error has occurred during product information collection. Creating a directory has failed.
Action method
Check the disk capacity and the write privileges for the output path.
If the user does not have write privileges, change the privileges. If there is not enough free space, delete any unnecessary files before executing the command again.
If the problem persists, contact Fujitsu technical support.
Error Type
ERROR
Output to event logs or syslogs
No
Description
An error has occurred during log information collection.
Creating a directory failed.
Action method
Error Type
ERROR
Output to event logs or syslogs
No
Description
There is not enough free space at the specified output destination path.
Action method
Delete any unnecessary files, and then try again.
Error Type
ERROR
Output to event logs or syslogs
No
Description
An error has been detected while information about the execution infrastructure was being collected.
Action method
Check the disk capacity for the output path. If there is not enough free space, delete any unnecessary files and then execute the command again.
If the problem persists, contact Fujitsu technical support.
Error Type
ERROR
Output to event logs or syslogs
No
Description
An error has been detected during product information collection.
Action method
Check the disk capacity for the output path. If there is not enough free space, delete any unnecessary files and then execute the command again.
If the problem persists, contact Fujitsu technical support.
Error Type
ERROR
Output to event logs or syslogs
No
Description
An error has been detected during log information collection.
Action method
Check the disk capacity for the output path. If there is not enough free space, delete any unnecessary files and then execute the command again.
If the problem persists, contact Fujitsu technical support.
Error Type
ERROR
Output to event logs or syslogs
No
Description
An error has occurred with the backup processing.
Action method
Check the disk capacity for the output path. If there is not enough free space, delete any unnecessary files and then execute the command again.
If the problem persists, contact Fujitsu technical support.
Error Type
ERROR
Output to event logs or syslogs
No
Description
An error has occurred with the restoration processing.
Action method
Check the disk capacity for the output path. If there is not enough free space, delete any unnecessary files and then execute the command again.
If the problem persists, contact Fujitsu technical support.
Error Type
ERROR
Output to event logs or syslogs
No
Description
The retry folder does not exist.
Parameters
Action method
Check the settings in the email transmission configuration file.
Error Type
ERROR
Output to event logs or syslogs
No
Description
The failure folder does not exist.
Parameters
Action method
Check the settings in the email transmission configuration file.
Error Type
ERROR
Output to event logs or syslogs
No
Description
Failed to move the files.
Parameters
Action method
Contact Fujitsu technical support.
Error Type
ERROR
Output to event logs or syslogs
No
Description
The process of resending an email has failed.
Action method
Contact Fujitsu technical support.
Error Type
ERROR
Output to event logs or syslogs
No
Description
An error has occurred during the collection of investigation data for Systemwalker Software Configuration Manager.
Action method
Check the disk capacity for the output path. If there is not enough free space, delete any unnecessary files and then execute the command again.
If the problem persists, contact Fujitsu technical support.
Error Type
ERROR
Output to event logs or syslogs
No
Description
The disk has run out of free space during the restoration processing.
Action method
Delete any unnecessary files and then try again.
Error Type
WARNING
Output to event logs or syslogs
No
Description
Failed to move some files.
Action method
If this problem occurs frequently, contact Fujitsu technical support.
Error Type
ERROR
Output to event logs or syslogs
No
Description
A system error has occurred.
Action method
Contact Fujitsu technical support.
Error Type
ERROR
Output to event logs or syslogs
No
Description
Failed to copy the files.
Action method
Check the disk capacity for the output path. If there is not enough free space, delete any unnecessary files and then execute the command again.
If the problem persists, contact Fujitsu technical support.
Error Type
ERROR
Output to event logs or syslogs
No
Description
Failed to copy the file.
Parameters
Action method
Check the disk capacity for the output path. If there is not enough free space, delete any unnecessary files and then execute the command again.
If the problem persists, contact Fujitsu technical support.
Error Type
ERROR
Output to event logs or syslogs
No
Description
Failed to execute the command.
Action method
Check the disk capacity for the output path. If there is not enough free space, delete any unnecessary files and then execute the command again.
If the problem persists, contact Fujitsu technical support.
Error Type
ERROR
Output to event logs or syslogs
No
Description
Failed to execute the command.
Parameters
Action method
Check the disk capacity for the output path. If there is not enough free space, delete any unnecessary files and then execute the command again.
If the problem persists, contact Fujitsu technical support.
Error Type
ERROR
Output to event logs or syslogs
No
Description
The specified path to the folder containing backup data is incorrect.
Action method
Specify an existing path as the folder containing backup data.
Error Type
ERROR
Output to event logs or syslogs
No
Description
The specified path to the folder for backup data does not contain files or directories.
Action method
Specify the path to the files obtained by the backup command as the folder containing backup data.
Error Type
ERROR
Output to event logs or syslogs
No
Description
The specified path to the folder containing backup data is not readable.
Action method
Assign read permissions to the backup path.
Error Type
ERROR
Output to event logs or syslogs
No
Description
The specified command options are invalid.
Action method
Enter the command correctly.
Error Type
ERROR
Output to event logs or syslogs
No
Description
The specified input file path is incorrect.
Action method
Specify an existing path for the input file.
Error Type
ERROR
Output to event logs or syslogs
No
Description
The specified character encoding is incorrect.
Action method
Specify the correct character encoding.
Error Type
ERROR
Output to event logs or syslogs
No
Description
Failed to read the file.
Action method
Contact Fujitsu technical support.
Error Type
ERROR
Output to event logs or syslogs
No
Description
The definition in line {0} is incorrect.
Parameters
Action method
The syntax of the line indicated in the input file is incorrect.
Take one of the following actions, depending on the cause of the problem.
For "Number of elements", review the number of elements in the line indicated.
For "Rpm-name required.", specify the value of rpm-name in the line indicated.
For "Rpm-version required in case rpm-release is defined.", specify the value of rpm-version in the line indicated.
Error Type
WARNING
Output to event logs or syslogs
No
Description
The following definition has been disabled by a priority judgment.
Action method
Check the data.
Error Type
ERROR
Output to event logs or syslogs
No
Description
Failed to write the Linux patch management target configuration file.
Action method
Check the disk capacity and the write privileges for the output path directory.
If the user does not have write privileges, change the privileges. If there is not enough free space, delete any unnecessary files before executing the command again.
If the problem persists, contact Fujitsu technical support.
Error Type
ERROR
Output to event logs or syslogs
No
Description
The specified command options are invalid.
Action method
Enter the command correctly.
Error Type
ERROR
Output to event logs or syslogs
No
Description
Failed to write the file.
Action method
Contact Fujitsu technical support.
Error Type
ERROR
Output to event logs or syslogs
No
Description
Action method
Enter the command correctly.
Error Type
ERROR
Output to event logs or syslogs
No
Description
The specified registration file path is incorrect.
Action method
Specify the path to an existing registration file.
Error Type
ERROR
Output to event logs or syslogs
No
Description
The specified update application management registry configuration file is incorrect.
Action method
Specify the correct update application management registry configuration file.
Do not change the name of the update application management registry configuration file that has been downloaded from the UpdateSite.
When specifying the path of update application management registry configuration file that includes the current directory, specify the current directory as ".\" in Windows or "./" in Linux.
Error Type
ERROR
Output to event logs or syslogs
No
Description
The UpdateAdvisor asset registration processing has failed.
Action method
The UpdateAdvisor asset registration processing has failed. The failure could have been caused by exclusive control, so execute the processing again. If it fails again, contact Fujitsu technical support.
Error Type
ERROR
Output to event logs or syslogs
No
Description
The specified command options are invalid.
Action method
Enter the command correctly.
Error Type
ERROR
Output to event logs or syslogs
No
Description
The specified input directory path is incorrect.
Action method
Specify the path to an existing directory.
Error Type
ERROR
Output to event logs or syslogs
No
Description
There is no information about released patches for Fujitsu middleware.
Action method
Specify the correct path to the released patches storage directory as a command option.
Error Type
ERROR
Output to event logs or syslogs
No
Description
Registering released patches for Fujitsu middleware has failed.
Action method
The processing that registers released patches for Fujitsu middleware has failed. The failure could have been caused by exclusive control, so execute the processing again. If it fails again, contact Fujitsu technical support.
Error Type
ERROR
Output to event logs or syslogs
No
Description
The specified command options are invalid.
Action method
Enter the command correctly.
Error Type
ERROR
Output to event logs or syslogs
No
Description
The processing that gets patch management information has failed.
Action method
The processing that gets patch management information has failed. The failure could have been caused by either insufficient disk space at the output destination or exclusive control. Check the disk capacity at the output destination and then execute the processing again. If it fails again, contact Fujitsu technical support.
Error Type
INFO
Output to event logs or syslogs
No
Description
Systemwalker Software Configuration Manager will start.
Action method
No action is required.
Error Type
INFO
Output to event logs or syslogs
No
Description
Systemwalker Software Configuration Manager will stop.
Action method
No action is required.
Error Type
INFO
Output to event logs or syslogs
No
Description
Startup processing for the file transfer infrastructure will start.
Action method
No action is required.
Error Type
INFO
Output to event logs or syslogs
No
Description
Stop processing for the file transfer infrastructure will start.
Action method
No action is required.
Error Type
WARNING
Output to event logs or syslogs
No
Description
The following update numbers have been unregistered:
Action method
Execute the released patch acquisition tool and this command again. If this problem still occurs, contact Fujitsu technical support.
Error Type
ERROR
Output to event logs or syslogs
No
Description
Unable to send an email to the user.
Parameters
Action method
The message ID (CFMGMxxxxx) for the email transmission function will be output in the message details. Take the appropriate action based on this message ID.
Error Type
ERROR
Output to event logs or syslogs
No
Description
The disk has run out of space.
Action method
Resolve the lack of disk space for the media library according to the procedure in "Moving the Media Library" in the Operation Guide.
Error Type
ERROR
Output to event logs or syslogs
No
Description
The parameter is illegal.
Parameters
Action method
Parameter {0} is incorrect. Review the specified parameters and then execute the command again.
Error Type
ERROR
Output to event logs or syslogs
No
Description
An indispensable parameter is not specified.
Parameters
Action method
Specify the mandatory parameter and then execute the command again.
Error Type
ERROR
Output to event logs or syslogs
No
Description
Failed to set the value to the registry.
Parameters
Action method
Check whether the user that executed the command has the privileges required to set up registries. Review the privileges and then try again.