3.4.1 Message Output During Installation

[I401-ERR003] InstConf.ini file is not found. Please specify the path of InstConf.ini file. The installation is cancelled.

Cause

The specified path of InstConf.ini file is incorrect when executing setup.exe.

Resolution

Please specify the path of InstConf.ini file correctly.

[I401-ERR004] The value of %s cannot be read from InstConf.ini. Please reinstall. The installation is cancelled.

Variable Information

%s : one session name of following mentioned failed to be read

SvIPAddress
SvIPAddress2
CommPort
SendPort
SendPort2
Password
LogDireCTory
RebootAfterInstall
ClientDireCTory
PrinterMode
MailSendWatchPort
MailAttachDeterrentMode
MailAttachDeterrentPort
MailAttachDeterrentPort2

Cause

Failed to read the value of %s recorded in InstConf.ini file.

Resolution

Please confirm the path and content of InstConf.ini file.

[I401-ERR005] In the InstConf.ini file, the value of %s is incorrect. Please record the correct value. The installation is cancelled.

Variable Information

%s : incorrect value (one session name of following mentioned)

SvIPAddress
SvIPAddress2
CommPort
SendPort
SendPort2
Password
LogDireCTory
RebootAfterInstall
ClientDireCTory
PrinterMode
MailSendWatchPort
MailAttachDeterrentMode
MailAttachDeterrentPort
MailAttachDeterrentPort2

Cause

The value of %s recorded in InstConf.ini file is incorrect.

Resolution

Please correctly record the InstConf.ini file.

[I401-ERR006] Fail to copy the %s file. Failed to copy the
It is caused because:
-the disk capacity is insufficient
-the corresponding disk denies being written
-the file with the same name already exists, etc.
Please reinstall after confirmation.
The installation is cancelled.

Cause

Failed to copy the %s file due to insufficient disk capacity or the corresponding disk denies being written or there already exists a folder with the same name.

Resolution

Please confirm whether the disk capacity is insufficient, or the corresponding disk denies being written or the folder with the same name already exists, and then reinstall it.

[I401-ERR007] Failed to create the %s directory.
It is caused because:
-the disk capacity is insufficient
-the corresponding disk denies being written
-the file with the same name already exists, etc.
Please reinstall after confirmation.
The installation is cancelled.

Cause

Failed to create the folder due to insufficient disk capacity or the corresponding disk denies being written or there already exists a folder with the same name.

Resolution

Please confirm whether the disk capacity is insufficient, or the corresponding disk denies being written or the folder with the same name already exists, and then reinstall it.

[I401-ERR008] Failed to read the value of registry. Please contact the system administrator. The installation is cancelled.

Cause

Failed to read the value of the registry.

Resolution

This could be caused because some key value of the registry is deleted. Please contact Fujitsu technical staff.

[I401-ERR009] Failed to generate the registry. Please reinstall it after logging on as administrator. The installation is cancelled.

Cause

Failed to generate the value of the registry.

Resolution

Please reinstall it after logging on as administrator.

[I401-ERR010] Failed to create the registry. Please reinstall after logging on as Administrator. The installation is cancelled.

Cause

The user who performs installation does not have administrator authority.

Resolution

Please reinstall it after logging on as administrator.

[I401-ERR012] Failed to register the service. Please contact the system administrator. The installation is cancelled.

Cause

Fail to register CT service.

Resolution

Please contact the system administrator.

[I401-ERR014] Failed to install the monitoring function of Citrix XenApp. Please confirm the target OS and ServicePack. The installation is cancelled.

Cause

Prepare to install in “Unsupported OS or ServicePack”.

Resolution

Please install in “Supported OS and ServicePack”.

[I401-ERR015] Failed to install the monitoring function of Citrix XenApp. Please confirm the error contents in the installation log file. Installation log file:[%s]. The installation is cancelled.

Variable Information

%s : name of installation log file

Cause

This will be displayed when some errors occurred during the installation in silent mode.

Resolution

Please confirm the incorrect contents existed in installation log file in the path which is displayed in message.

[I401-ERR019] The installation of%1 has been completed, but an error occurred.
Please confirm the error contents in the installation log file.
Installation log file: [%2].
The installation is cancelled.

Variable Information

%1 : installation function name
%2 : name of installation log file name

Cause

The installation is finished, but errors occurred.

Resolution

Please confirm the incorrect contents existed in installation log file in the path which is displayed in message.

[I401-ERR101] The Systemwalker Desktop Keeper Server has been installed. Please reinstall after uninstalling the server. The installation is cancelled.

Cause

The Systemwalker Desktop Keeper Server has already been installed.

Resolution

Please reinstall it after uninstalling the Systemwalker Desktop Keeper server.

[I401-ERR102] The Secure Keeper client has already been installed. Please reinstall it after uninstalling the Secure Keeper. The installation is cancelled.

Cause

The Secure Keeper Client has already been installed.

Resolution

Please reinstall it after uninstalling the Secure Keeper.

[I401-ERR103] The Secure Keeper Client has been installed. Please reinstall after uninstalling the Secure Keeper Client. The installation is cancelled.

Cause

Failed to replace the command prompt by shortcut.

Resolution

Please modify the link address of the command prompt shortcut as “fsw41ej1.exe” program in the Windows system folder.

[I401-ERR104] Failed to copy the command line. Please contact the system administrator. The installation is cancelled.

Cause

Failed to copy the command prompt.

Resolution

Please manually copy the command prompt.
cmd.exe → fsw00ej2.exe (within system directory. Example: C:\winnt\system32\cmd.exe → C:\winnt\system32\fsw00ej2.exe)

[I401-ERR106] The previous installation/uninstallation is not completed. Please reinstall after restarting. The installation is cancelled.

Cause

The computer does not reboot after the previous installation/uninstallation.

Resolution

Please reinstall it after rebooting.

[I401-ERR109] The selection folder cannot specify the root directory of drive or drive other than fixed disk. Please specify the correct folder.

Cause

The selected folder is specified as the root directory of drive or the folder of drive other than the fixed disk.

Resolution

Please specify a folder other than the root directory of a fixed disk.

[I401-ERR113] Please enter the characters within 32 bytes in the password of InstConf.ini file. The installation is cancelled.

Cause

The length of the password entered in the InstConf.ini file has exceeded 33 characters.

Resolution

Please enter the password within 32 characters.

[I401-ERR114] The installation parameter has been specified. The monitoring function of Citrix XenApp has been installed. The installation is cancelled.

Cause

Please reinstall when the monitoring function of Citrix XenApp has been installed.

Resolution

[I401-ERR115] The Systemwalker Desktop Keeper server of old VL has been installed. Or prepare to install the monitoring function of Citrix XenApp on server of Base Edition. Please upgrade the Version or Edition of server. The installation is cancelled.

Cause

The Systemwalker Desktop Keeper server of older VL has been installed, or the monitoring function of Citrix XenApp will be installed on Standard Edition server.

Resolution

Please upgrade the version or Edition of server.

[I401-ERR116] The Systemwalker Desktop Keeper client has been installed. Please reinstall after uninstalling the client. The installation is cancelled.

Cause

The Systemwalker Desktop Keeper client has been installed.

Resolution

Please reinstall Systemwalker Desktop Keeper after uninstalling the client.

[I401-WRN001] When the drive of log saving folder is specified as prohibited drive, the logs may not be collected normally.
It is recommended to specify the folder of OS installation drive.
Continue?

Cause

This information will be displayed when the log saving folder is set in the drive other than the drive in the path of OS installation target.

Resolution

It is recommended to place the log saving folder at the drive in the path of OS installation target.

[I401-WRN002] When the overwrite installation is performed for the current installed client, part of function cannot be operated before restarting.
Please restart immediately after the installation is completed.

Cause

This will be displayed when reinstalling in the client of V13.2.1.

Resolution

Please reboot immediately after the reinstallation is finished.

[I411-ERR001] IP address error. Please enter a value between 1 and 254.

Cause

Numbers out of range from 1 to 254, or nonnumeric characters are entered in the IP address.

Resolution

Please enter a value within the range from 1 to 254.

[I411-ERR002] IP address error. Please enter a value between 0 and 255.

Cause

Numbers out of range from 0 to 255, or nonnumeric characters are entered in the IP address.

Resolution

Please enter a value within the range from 0 to 255.

[I411-ERR003] Port number error. Please enter a value between 5001 and 60,000.

Cause

Numbers out of range from 5001 to 60000, or nonnumeric characters are entered in the port number.

Resolution

Please enter a value within the range from 5001 to 60000.

[I411-ERR004] IP address error. Please enter a correct value.

Cause

The format of IP address is incorrect.

Resolution

Please enter an IP address in correct format.

[I411-ERR005] The password does not match. Please enter the correct password.

Cause

The entered password and re-entry password do not match.

Resolution

Please enter the correct password.

[I411-ERR006] The saving target of log file is incorrect. Please enter a correct value.

Cause

It is the prompted information when going to the next step before entering the saving target path of the log file.

Resolution

Please enter a correct saving path of the log file.

[I411-ERR008] The password is not entered. Please enter the password.

Cause

The password is not entered.

Resolution

Please enter the password.

[I411-ERR009] The characters not allowed in password are entered. The characters that can be entered are single-byte letters and numerals, and symbols excluding the following symbols. In addition, the double-byte and single-byte space cannot be entered.
Characters that cannot be entered: “&” “<” “>” “|” “\” “"” “^” “~” “'” “?” “:”

Cause

The invalid characters are entered in the password.

Resolution

Please only enter the valid characters.

[I411-ERR010] The symbols not allowed in directory name are entered. The symbols excluding the following symbols can be entered. Symbols that cannot be entered: “#” “%” “/” “:” “*” “?” “"” “<” “>” “|”

Cause

The invalid symbols are entered as directory name.

Resolution

Please only enter the valid character as directory name.

[I411-ERR012] When not coexisting with the server, the loop back address (127.0.0.1) cannot be specified. Please enter the correct address.

Cause

Though (Master) Management Server and monitoring function cannot coexist, the loop back address (127.0.0.1) is still specified as the IP address of (Master) Management Server.

Resolution

Please enter a correct IP address of (Master) Management Server.

[I411-ERR018] Please enter the password within 32 characters.

Cause

It is the cause why trying to enter the password exceeding 33 characters.

Resolution

Please enter the password within 32 characters.

[I411-ERR019] The port number repeated. Please enter the different values.

Cause

Duplicated port number.

Resolution

Please set the duplicated port number as different values.

[I411-ERR020] The port number is incorrect. Please enter a value between 0 and 65,535.

Cause

A number outside 0-65535 or a non-numeric character has been entered in the port number.

Resolution

Please enter a value within 0-65535.

[I411-ERR021] The length of specified folder path is too long. Please specify a path within 96 bytes.

Cause

The path of specified folder is too long.

Resolution

Please specify the path within 96 bytes.

[I431-ERR002] The monitoring function of Citrix XenApp is not installed. Please update again after installation. The update is cancelled.

Cause

The monitoring function of Citrix XenApp is not installed.

Resolution

Please update again after installing the monitoring function of Citrix XenApp.

[I999-ERR999] Please contact the system administrator.

Cause

The installer may be damaged.

Resolution

Please contact Fujitsu technical staff.