Systemwalker Desktop Keeper V14g User's Guide for Administrator

3.1 Search CT Information/User Information

Search CT Information

The following describes the procedure of searching the CT group and CT displayed in the Management Console.

When the “Deleted CT” group is displayed in the CT group tree of the Management Console, the client (CT) to which the “Deleted CT” group belongs will also be searched.
The client (CT) of the “Deleted CT” group will be displayed as “Deleted CT” in “Group Name” of the area for displaying search result.

1. Start [Management Console].

2. Select the [Root directory] or [CT Group] to be searched from the CT group tree.

3. Select [Search CT/CT Group] from the [File] menu (or right-click and select [Search CT/CT group] from the displayed pop-up menu).

   → The [Management Console Search CT/CT group] window is displayed.

   

4. Enter the following information as the search condition.

   The search is the “AND search” that includes multiple conditions.

   [Search CT group]
   Specify [Name/CT Group Name] and [Notes] only. In addition, the [As condition] checkbox of [Applied policy] should not be selected.

   [Search Condition]

   Specify the items of search condition.

   Item Name		Description
   [Computer Name]		Search according to the computer name of the client (CT). Results that partially match with the input conditions will be displayed. Up to 15 bytes of single-byte and double-byte characters can be entered.
   [IP Address]		Search according to the IP address of the client (CT). The result of which the front part matches with the input conditions will be displayed. When searching with “10.1”, the result will include “10.1.”,“10.1X.” and “10.1XX.”. ( “X” indicates one numeral character) Enter in the format of “XXX.XXX.XXX.XXX”. [Example] 140.48.23.12
   [MAC Address]		Search according to the MAC address of the client (CT). The result that completely matches with the input conditions will be displayed. Enter in the format of “XX-XX-XX-XX-XX-XX”. (“X” indicates one alphanumeric character) [Example] 02-E0-32-33-A3-C0
   [Owner]		Search according to the owner set in the OS of the client (CT). Results that partially match with the input conditions will be displayed. Up to 93 bytes of single-byte and double-byte characters can be entered.
   [CT Version]		Search according to the version of the client (CT) of the Systemwalker Desktop Keeper installed. Results that completely match with the input conditions will be displayed. Enter in the format of “X.X.X.X”. (“X” indicates more than one numeral characters) [Example] 2.1.0.1
   [Name/CT Group Name]		Search according to the name of the CT group or client (CT). Results that partially match with the input conditions will be displayed. Up to 40 bytes of single-byte and double-byte characters can be entered.
   [DTPID]		This is displayed when the client (CT) of Systemwalker Desktop Keeper and the client (CT) of Systemwalker Desktop Patrol are installed on the same PC. Enter “User ID (+) PC name” of the client (CT) of Systemwalker Desktop Patrol. Perform search with partial matching.
   [Notes]		Search according to the notes entered when updating the client (CT) policy. Results that partially match with the input conditions will be displayed. Up to 128 bytes of single-byte and double-byte characters can be entered.
   [Last Logon Date]		The client (CT) communicates with the Master Management Server or Management Server at startup. Search according to the date when this communication is enabled Enter in the format of “XXXXXXXX”. (“X” indicates one numeral character) [Example] 20050701
   [Client Policy Update Date]		Search according to the last date when the client (CT) obtains policy from the Master Management Server or Management. Enter in the format of “XXXXXXXX”. (“X” indicates one numeral character) [Example] 20050922
   [Applied Policy]	[As Condition]	When this checkbox is selected, the policy being applied to the client (CT) will be included in the search condition.
   	[CT]	The search target is the client (CT) to which the CT policy is applied.
   	[Group]	The search target is the client (CT) to which the CT group policy is applied.
   [Active Directory Linkage Target]	[As Condition]	When this checkbox is selected, whether it is the client (CT) that imports information from Active Directory will be included in the search condition.
   	[Linkage Target]	The search target is the client (CT) that imports information from Active Directory.
   	[Not Linkage Target]	The search target is the client (CT) that does not import information from Active Directory.
   [Virtual PC]	[As Condition]	When this checkbox is selected, the environment with client (CT) installed will be included in the search condition.
   	[Physical PC]	This refers to the client (CT) installed in a physical PC.
   	[Virtual PC]]	This refers to the client (CT) installed in a virtual PC.
   	[Master Image]	This refers to the client (CT) installed in the master image of a virtual PC.
   [Search]		The search will be started and the results will be displayed.
   [Close Window]		The entered search condition will be saved.

5. Click the [Search] button.

   → The search results are displayed.
   The displayed items are the ones selected from the [Setting of CT List Display Column] window. For the [Setting of CT List Display Column], please refer to “When modifying the displayed items and sequence”.
   When double-clicking on the CT or CT group that has been found, the [Management Console] window will be displayed, and the co=rresponding CT or CT group will be in selected state. The [Search CT/CT group] window will not be closed and will be displayed in minimized status.

6. Click the [Close Window] button.

   → The entered search condition is saved.
   The saved search condition will be displayed at the next time when the [Search CT/CT group] window is started. However, the search condition that is currently input will not be saved if the window is closed by clicking the [×] button at the top right of the [Search CT/CT group] window.

   
   

Search User Information

Search of user and user group can be executed in the Management Console.

The search procedure is as follows.

1. Start [Management Console].

2. Select [User Policy Settings] from the [User Settings] menu.

   → The [User Policy Settings] window is displayed.

3. Select the [Root directory] or [User Group] to be searched from the user group tree.

4. Select [Search User/User Group] from the [File] menu (or right-click and select [Search User/User Group] from the displayed pop-up menu).

   →The [Management Console Search User/User Group] window is displayed.

   

5. Enter the following information as the search condition.

   The search is the “AND search” that includes multiple conditions.

   [Search user group]
   Specify [User Name/Group Name] and [Notes] only. In addition, the [Applied Policy] and [Do not Applied User Policy] checkboxes should not be selected.

   [Search user]

   Specify the items of search condition.

   Item Name		Description
   [User Name/Group Name]		Search according to user name and user group name. Results that partially match with the input conditions will be displayed. Up to 40 bytes of single-byte and double-byte characters can be entered.
   [User’s Name]		Search according to the name of user that users the user name. Results that partially match with the input conditions will be displayed. Up to 128 bytes of single-byte and double-byte characters can be entered.
   [Employee No.]		Search according to the Employee No. of the user that uses the user name. Results that partially match with the input conditions will be displayed. Up to 40 bytes of single-byte and double-byte characters can be entered.
   [POST]		Search according to the title of the user that uses the user name. Results that partially match with the input conditions will be displayed. Up to 128 bytes of single-byte and double-byte characters can be entered.
   [Organization]		Search according to the organization to which the user that uses the user name belongs. Results that partially match with the input conditions will be displayed. Up to 128 bytes of single-byte and double-byte characters can be entered.
   [Organization Code]		Search according to the organization code to which the user that uses the user name belongs. Results that partially match with the input conditions will be displayed. Up to 40 bytes of single-byte and double-byte characters can be entered.
   [Notes]		Search according to the remark information of the user that uses the user name. Results that partially match with the input conditions will be displayed. Up to 128 bytes of single-byte and double-byte characters can be entered.
   [Applied Policy]	[As Condition]	When this checkbox is selected, the policy that is applied to user will be included in the search condition.
   	[User]	The search target is the user to which the user policy is applied.
   	[Group]	The search target is the user to which the user group policy is applied.
   [Do not Apply User Policy]	[As Condition]	When this checkbox is selected, whether the user policy is applied will be included in the search condition.
   	[Applied]	The search target is the user to which the user policy is applied.
   	[Not Applied]	The search target is the user to which the user policy is not applied.

6. Click the [Search] button.

   →The search results are displayed.

   

   When double-clicking on the user or user group that has been found, the [Management Console] window will be displayed, and the correspondent user or user group will be in selected state. The [Search User/User Group] window will not be closed and will be displayed in minimized status.

7. Click the [Close Window] button.

   → The input search condition is saved.
   The saved search condition will be displayed at the next time when the [Search User/User Group] window is started. However, the search condition that is currently input will not be saved if the window is closed by clicking the [×] button at the top right of the [Search User/User Group] window.