This function is not available.
Before using the USB device individual identification function, perform an execution test using a USB device that has been used before.
When using the USB device individual identification function, the built-in floppy disk drive connected by USB must be registered as well. In addition, the floppy disk drive that is not connected by USB cannot be identified and thus cannot be registered.
If reading prohibition and export prohibition functions are not configured in the [File Export Prohibition] tab, the USB device individual identification function for Explorer will not be run.
Specifically, even if [Read only], [Read and Write by file export utility only] or [Write by file export utility only] has been set in [Access settings] of the USB device registered in [List of available USB devices] in the [File export prohibition-Individual USB device identification function-Detailed setting] window, reading and exporting through Explorer cannot be prohibited. The file export utility will run according to the settings.
When the individual identification function is used for a USB device with the lock function, please register by using the information of the USB device in the unlocked state.
Please selected multiple USB devices with same [Device name] and [Internal serial number] but different [Identification methods] in the [File export prohibition-Detailed setting of individual USB device identification function-Select USB device] window of the Management Console. The USB device identification function may run abnormally.
