[Description]
The processing for setting up the environment has started.
[Corrective Measures]
This message simply indicates that the command has started, and no action is required.
[Description]
The processing for deleting the environment has started.
[Corrective Measures]
This message simply indicates that the command has started, and no action is required.
[Description]
The processing for adding the host has started.
[Corrective Measures]
This message simply indicates that the command has started, and no action is required.
[Description]
The processing for deleting the host has started.
[Corrective Measures]
This message simply indicates that the command has started, and no action is required.
[Description]
The processing for enabling the Systemwalker authentication repository environment has started.
[Corrective Measures]
This message simply indicates that the command has started, and no action is required.
[Description]
The processing for disabling the Systemwalker authentication repository environment has started.
[Corrective Measures]
This message simply indicates that the command has started, and no action is required.
[Description]
The processing for referring to the Systemwalker authentication repository environment has started.
[Corrective Measures]
This message simply indicates that the command has started, and no action is required.
[Description]
The processing for checking the Systemwalker authentication repository environment has started.
[Corrective Measures]
This message simply indicates that the command has started, and no action is required.
[Description]
The processing for setting up the environment has terminated normally.
[Corrective Measures]
This message simply indicates that the command has terminated, and no action is required.
[Description]
The processing for deleting the environment has terminated normally.
[Corrective Measures
This message simply indicates that the command has terminated, and no action is required.
[Description]
The processing for setting up the environment has been canceled.
[Corrective Measures]
This message simply indicates that the command has terminated, and no action is required.
[Description]
The processing for adding the host has terminated normally.
[Corrective Measures]
This message simply indicates that the command has terminated, and no action is required.
[Description]
The processing for deleting the host has terminated normally.
[Corrective Measures]
This message simply indicates that the command has terminated, and no action is required.
[Description]
The processing for deleting the host has been canceled.
[Corrective Measures]
This message simply indicates that the command has terminated, and no action is required.
[Description]
The processing for enabling the Systemwalker authentication repository environment has terminated normally.
[Corrective Measures]
This message simply indicates that the command has terminated, and no action is required.
[Description]
The processing for disabling the Systemwalker authentication repository environment has terminated normally.
[Corrective Measures]
This message simply indicates that the command has terminated, and no action is required.
[Description]
The processing for referring to the settings for the Systemwalker authentication repository environment has terminated normally.
[Corrective Measures]
This message simply indicates that the command has terminated, and no action is required.
[Description]
The processing for checking the settings for the Systemwalker authentication repository environment has terminated normally.
[Corrective Measures]
This message simply indicates that the command has terminated, and no action is required.
[Description]
This message asks for confirmation about whether it is OK to start the command processing.
[System Action]
The system waits for a response to be entered.
[Corrective Measures]
Enter "y" to reset the environment, otherwise enter "n".
[Description]
This message asks for confirmation about whether it is OK to start the command processing.
[Parameter]
%1: Host name or IP address
[System Action]
The system waits for a response to be entered.
[Corrective Measures]
Enter "y" to delete the host name (or IP address), otherwise enter "n".
[Description]
This message asks for confirmation about whether it is OK to start the command processing.
[System Action]
The system waits for a response to be entered.
[Corrective Measures]
Enter "y" to delete the host, otherwise enter "n".
[Description]
This message asks for confirmation about whether it is OK to start the command processing.
[System Action]
The system waits for a response to be entered.
[Corrective Measures]
Enter "y" to delete all of the hosts, otherwise enter "n".
[Description]
The connected Systemwalker authentication repository has been changed.
[Parameter]
%1: Host name or IP address
[Corrective Measures]
This message simply indicates that the connected host has been switched, and no action is required.
[Description]
The specified host name or IP address of the host to be deleted has not been set up.
[Parameter]
%1: Host name or IP address
[System Action]
The system stops the processing for deleting the host.
[Corrective Measures]
Check the specified host name or IP address, and then try again.
[Description]
The number of arguments or argument keywords specified with the command is invalid.
[Parameter]
%1: Invalid number of arguments or argument keywords
[System Action]
The system stops the command processing.
[Corrective Measures]
Check the synopsis for the command that has been executed, by referring to "swidmg_set_repository (Connection Destination Systemwalker Authentication Repository Setup Command)" in the "Command Reference" section. Execute the command again after specifying the correct number of arguments in accordance with the synopsis.
[Description]
There is an error with an argument specified with the command.
[Parameter]
%1: Specified argument
[System Action]
The system stops the command processing.
[Corrective Measures]
Check the synopsis for the command that has been executed, by referring to "swidmg_set_repository (Connection Destination Systemwalker Authentication Repository Setup Command)" in the "Command Reference" section. Execute the command again after specifying the correct argument in accordance with the synopsis.
[Description]
There is an error with an argument specified with the command.
[Parameter]
%1: Specified argument
%2: Specified argument value
[System Action]
The system stops the command processing.
[Corrective Measures]
Check the synopsis for the command that has been executed, by referring to "swidmg_set_repository (Connection Destination Systemwalker Authentication Repository Setup Command)" in the "Command Reference" section.
Execute the command again after specifying the correct argument in accordance with the synopsis.
If there is no problem with the synopsis for the command, a value that cannot be processed has been specified as an argument value. Check which values can be specified, by referring to the information about the options for the command.
[Description]
An argument is specified more than once.
[Parameter]
%1: Duplicate argument
[System Action]
The system stops the command processing.
[Corrective Measures]
Check the synopsis for the command that has been executed, by referring to "swidmg_set_repository (Connection Destination Systemwalker Authentication Repository Setup Command)" in the "Command Reference" section.
Execute the command again after eliminating any redundant options.
[Description]
The string length of the specified argument has exceeded the maximum limit.
[Parameter]
%1: Specified argument
%2: Maximum size
%3: Specified argument size
[System Action]
The system stops the command processing.
[Corrective Measures]
Check the options for the command that has been executed, by referring to "swidmg_set_repository (Connection Destination Systemwalker Authentication Repository Setup Command)" in the "Command Reference" section.
Execute the command again after specifying a string that is not longer than the maximum number of characters that can be specified.
[Description]
A required argument is missing.
[Parameter]
%1: Required argument
[System Action]
The system stops the command processing.
[Corrective Measures]
Check the synopsis for the command that has been executed, by referring to "swidmg_set_repository (Connection Destination Systemwalker Authentication Repository Setup Command)" in the "Command Reference" section.
Execute the command again after adding the required argument.
[Description]
The command cannot be executed with the ADDHOST option because the Interstage Directory Service has been selected as the Systemwalker authentication repository.
[System Action]
The system stops the command processing.
[Corrective Measures]
Check the synopsis for the command that has been executed, by referring to "swidmg_set_repository (Connection Destination Systemwalker Authentication Repository Setup Command)" in the "Command Reference" section.
Execute the command again after specifying the correct argument in accordance with the synopsis.
[Description]
The environment for the Systemwalker authentication repository has not been set up.
[System Action]
The system stops the command processing.
[Corrective Measures]
Set up the environment by executing the command with the SET option, and then execute the command again.
[Description]
Only one instance of the connection destination Systemwalker authentication repository setup command can run at a time. The command could not be started, because another instance of the command was already running.
[System Action]
The system stops the command processing.
[Corrective Measures]
If necessary, execute the command again after the command that is currently being executed has completed.
[Description]
You do not have the privileges to execute the connection destination Systemwalker authentication repository setup command.
[System Action]
The system stops the command processing.
[Corrective Measures]
Execute the command again as a user with the following privileges.
Windows: Administrator privileges
UNIX: System administrator (superuser) privileges
[Description]
The processing for setting up the environment has failed.
[System Action]
The system stops the command processing.
[Corrective Measures]
This message indicates that the command has terminated abnormally. Take action based on the messages that were displayed before this message, and then execute the command again.
[Description]
The processing for deleting the environment has failed.
[System Action]
The system stops the command processing.
[Corrective Measures]
This message indicates that the command has terminated abnormally. Take action based on the messages that were displayed before this message, and then execute the command again.
[Description]
The processing for adding the host has failed.
[System Action]
The system stops the command processing.
[Corrective Measures]
This message indicates that the command has terminated abnormally. Take action based on the messages that were displayed before this message, and then execute the command again.
[Description]
The processing for deleting the host has failed.
[System Action]
The system stops the command processing.
[Corrective Measures]
This message indicates that the command has terminated abnormally. Take action based on the messages that were displayed before this message, and then execute the command again.
[Description]
The processing for enabling the Systemwalker authentication repository environment has failed.
[System Action]
The system stops the command processing.
[Corrective Measures]
This message indicates that the command has terminated abnormally. Take action based on the messages that were displayed before this message, and then execute the command again.
[Description]
The processing for disabling the Systemwalker authentication repository environment has failed.
[System Action]
The system stops the command processing.
[Corrective Measures]
This message indicates that the command has terminated abnormally. Take action based on the messages that were displayed before this message, and then execute the command again.
[Description]
The processing for referring to the environment settings for the Systemwalker authentication repository has failed.
[System Action]
The system stops the command processing.
[Corrective Measures]
This message indicates that the command has terminated abnormally. Take action based on the messages that were displayed before this message, and then execute the command again.
[Description]
The processing for checking the environment settings for the Systemwalker authentication repository has failed.
[System Action]
The system stops the command processing.
[Corrective Measures]
This message indicates that the command has terminated abnormally. Take action based on the messages that were displayed before this message, and then execute the command again.
[Description]
Copying the file failed.
[Parameter]
%1: Path to the source file
%2: Path to the target file
%3: Error details
[System Action]
The system stops the command processing.
[Corrective Measures]
An error occurred while the command was being executed to copy from the source file to the target file.
Check the error details indicated in the message, remove the cause of the error, and then execute the command again. If the cause of the error is unknown, collect maintenance information and contact Fujitsu technical support.
Refer to "How to Collect Maintenance Information" for details on how to collect maintenance information.
[Description]
Reading the definition file has failed.
[Parameter]
%1: File pathname
%2: Section name
%3: Key
[System Action]
The system stops the command processing.
[Corrective Measures]
Check whether the specified file path is correct, and also check whether the access permissions for the file have been set up.
If the problem still occurs even after the cause of the error has been removed, collect data using the Maintenance Information Collection Tool, and then contact Fujitsu technical support.
Refer to "How to Collect Maintenance Information" for details on how to collect maintenance information.
[Description]
Writing the definition file has failed.
[Parameter]
%1: File pathname
%2: Section name
%3: Key
[System Action]
The system stops the command processing.
[Corrective Measures]
Check whether the specified file path is correct, and also check whether the access permissions for the file have been set up.
If the problem still occurs even after the cause of the error has been removed, collect data using the Maintenance Information Collection Tool, and then contact Fujitsu technical support.
Refer to "Appendix A How to Collect Maintenance Information" for details on how to collect maintenance information.
[Description]
Creating the directory has failed.
[Parameter]
%1: Directory pathname
[System Action]
The system stops the command processing.
[Corrective Measures]
Check the status of the parent directory of the directory indicated in the message.
If write permissions have not been allocated for the parent directory, set up write permissions for the directory.
[Description]
Executing the command has failed.
[Parameter]
%1: Command name
%2: Details about the error, or the return value for the command in %1
[System Action]
The system stops the command processing.
[Corrective Measures]
Check that execution permissions have been set up correctly on the system for the command displayed. If execution permissions have been set up correctly, check whether the command is executed correctly when started in standalone mode.
If the problem still occurs after the command execution has been checked, collect data using the Maintenance Information Collection Tool, and then contact Fujitsu technical support.
Refer to "Appendix A How to Collect Maintenance Information" for details on how to collect maintenance information.
[Description]
The processing for creating the SSL communication environment has failed.
[System Action]
The system stops the command processing.
[Corrective Measures]
Take action based on the messages that were displayed before this message, and then execute the command again.
[Description]
Connecting to the Systemwalker authentication repository has failed.
[System Action]
The system stops the command processing.
[Corrective Measures]
Check whether the Systemwalker authentication repository has failed. If it is still running, check whether it is possible to connect to the network. After confirming that there is no connection problem, execute the command again.
[Description]
The Systemwalker authentication repository is in a busy state.
[System Action]
The system stops the command processing.
[Corrective Measures]
The Systemwalker authentication repository is in a high load state. Wait for a while, and then execute the command again.
[Description]
A timeout occurred while the Systemwalker authentication repository was being connected.
[System Action]
The system stops the command processing.
[Corrective Measures]
The Systemwalker authentication repository is in a high load state. Wait for a while, and then execute the command again.
[Description]
Memory became insufficient while the Systemwalker authentication repository was being connected.
[System Action]
The system stops the command processing.
[Corrective Measures]
Either install additional memory, or stop any applications that are not required. Then, execute the command again.
[Description]
Authentication using the Systemwalker authentication repository has failed.
[System Action]
The system stops the command processing.
[Corrective Measures]
Execute the command with the SET option again, and set up the correct user ID and password.
[Description]
Loading the library indicated in the message has failed.
[Parameter]
%1: Name of the library file that failed to load
%2: Error details
[System Action]
The system stops the command processing.
[Corrective Measures]
Check whether the library file indicated by the message exists.
If it exists, restart the system.
If the problem still occurs, or if the library file does not exist, collect maintenance information and contact Fujitsu technical support.
Refer to "Appendix A How to Collect Maintenance Information" for details on how to collect maintenance information.
[Description]
Obtaining the address of the library function indicated in the message has failed.
[Parameter]
%1: Library file name
%2: Function name
%3: Error details
[System Action]
The system stops the command processing.
[Corrective Measures]
Check whether the library file indicated by the message exists.
If it exists, restart the system.
If the problem still occurs, or if the library file does not exist, collect maintenance information and contact Fujitsu technical support.
Refer to "Appendix A How to Collect Maintenance Information" for details on how to collect maintenance information.
[Description]
The files required for the Systemwalker User Management function and the Systemwalker Single Sign-On function are missing.
[Parameter]
%1: Error details
[System Action]
The system stops the command processing.
[Corrective Measures]
Collect maintenance information and contact Fujitsu technical support.
Refer to "Appendix A How to Collect Maintenance Information" for details on how to collect maintenance information.
[Description]
An internal error occurred during the processing.
[System Action]
The system stops the command processing.
[Corrective Measures]
Check whether the Systemwalker product has been installed correctly. Also, check whether the server has enough memory and disk space for the command to run. If the problem cannot be resolved, collect maintenance information and contact Fujitsu technical support.
Refer to "Appendix A How to Collect Maintenance Information" for details on how to collect maintenance information.
