When a Report Type is specified, some of the following items are displayed. Exactly which items are displayed depends on the type that has been specified.
The items that are specified for each report type are explained below for the different specification types.
System group specification
Item | Description |
|---|---|
System Group | Select the system group to be analyzed from the drop-down list box. |
System group and host specification
Item | Description |
|---|---|
System Group | Select the system group to be analyzed from the drop-down list box. |
Host | Select the host to be analyzed from the drop-down list box. The list box displays the hosts that have been registered with the selected system group. |
System group, host and resource ID specification
Item | Description |
|---|---|
System Group | Select the system group to be analyzed from the drop-down list box. |
Host | Select the host to be analyzed from the drop-down list box. The list box displays the hosts that have been registered with the selected system group. |
Resource ID | The content specified for Resource ID depends on the type. The content that can be input for each type of report is explained below. Note that only alphanumeric characters and symbols (except for \,<>"$'[]=&) can be used. The maximum length is 128 characters. |
For resource piling only
Item | Description | |
|---|---|---|
System Group | Select the system group to be analyzed from the drop-down list box. | |
Aggregation candidate | Specify the consolidation candidate host. The hosts registered in the selected system group is in pull-down display, so select the host. From line 5, lines can be added by clicking the [Add] button. The unwanted line can be deleted by clicking the [Del] button. A maximum of 24 machines can be specified. A host cannot be specified redundantly. Note
| |
Aggregation target's information | Specify the aggregation target's Host / Direct input of installed resource | If the consolidation target host has already been registered in the system group, select [Specify the aggregation target's Host]. Otherwise, select [Direct input of installed resource]. |
Host | If [Specify the aggregation target's Host] was selected, the consolidation target host will be selected from the pull-down menu. The host specified as an aggregation candidate can not be specified. | |
CPU Number of CPU Memory | If [Direct input of installed resource] was selected, specify the consolidation destination server CPU clock number (GHz), CPU number, and loaded memory capacity (GB) as numbers.
Information of the specified CPU and memory is displayed in black line as amount of installed in displayed graph. | |
Permissible threshold (Optional) : CPU Memory | Specify the CPU and memory usage rates that will be tolerated on the consolidation destination server as a percentage. This can be omitted. If specified, displayed in red line in displayed graph. | |
For response estimation analysis only
Response estimation analyses are used to estimate response delays in each level of a three-tiered Web system consisting of a Web server, an application server and a database server when a variable value (increased request volume, number of additional servers) is specified.
The following environment must be in place before response estimation analysis can be generated:
A system group containing at least one Agent must exist in each level of the system (Web server, application server and database server). Note, however, that if all the servers reside together in a single host machine, the system group can contain all three hosts together.
The volume of Web transactions must be managed by the Agents making up the Web server level.
The Agents within a single system group unit must all be running either Windows or UNIX.
The following table lists the input items.
Item | Description | |
|---|---|---|
System Group1 | Specify the name of a system group where a Web server, application server and database server exist. The system group containing the Agent that manages the volume of Web transactions must always be specified in System Group 1. System Group 2 and 3 can be omitted. Point The performance information that is used by the application server and the database server is CPU information. It is not always necessary to set up performance management for linkage middleware such as Interstage Application Server or Symfoware Server. | |
System Group2 | ||
System Group3 | ||
Service name | Specify the name (resource ID) of the service that manages Web transaction volumes. If omitted, all services will be extracted. | |
Variable values | Increase in the number of requests | Specify the increase in the number of requests as a multiple of the current value. If 1.0 (the default value) is specified, the current delay time will be reported. |
Number of additional servers | Specify the number of servers to be added to each system group. If 0 (the default value) is specified, the current delay time will be reported. | |
Business hours | Specify the business timeframe to be targeted for reporting. | |
For service operational monitoring only
Item | Description |
|---|---|
System Group | Select the system group to be analyzed from the drop-down list box. |
Report time slot | Specify the target time period for the operating rate calculations. Specify the starting time (hour/minute) and the finishing time (hour/minute) for operations. Note If "One day" has been selected as the data interval, the report time period specification will not take effect. |
Detailed item specification
Item | Description |
|---|---|
System Group | Select the system group to be analyzed from the drop-down list box. |
Host | Select the host to be analyzed from the drop-down list box. The list box displays the hosts that have been registered with the selected system group. When ALL_SERVER is selected, all hosts in the system group are analyzed. |
Category name | Specify the target category name and field name for the analysis. For the field name, only options corresponding to the selected category name will be displayed. If the Display by difference checkbox is selected, information for cumulative values can be displayed incrementally. Refer to Section 4.2, "Drilled-Down/Report Information" in the Reference Guide for details on the category names and field names that can be specified. |
Field name | |
Display by difference | |
Resource ID | Specify the resource ID to be targeted for analysis. If nothing is specified, all resource IDs will be targeted. Point Resource IDs can be retrieved by right-truncating the resource ID according to a specified search string. Example: For example, if the two resource IDs "AAA123" and "AAA456" exist, both can be targeted by specifying "AAA". |
Graph size setting | Specify the size (in pixels) of the graph that will be output. Specify an integer between 200 and 1500. By default, the width is 700 pixels, and the height is 300 pixels. It is recommended that you specify a value that is equal to or greater than the default value. |
Data intervals cannot be specified for summary data time-series display. When Agents that have different collection intervals are in the same system group, the graph display will be affected if ALL_SERVER is selected. If the Display by difference checkbox is selected, some servers will not be displayed. Create system groups of Agents that have the same collection intervals.
For correlation/composition only
Item | Description | |
|---|---|---|
System Group | Select the system group to be analyzed from the drop-down list box. | |
Data 1 specification | Host1 | Select a host containing some of the data to be displayed from the drop-down list box. The list box displays the hosts that have been registered with the selected system group. When ALL_SERVER is selected, all hosts in the system group are targeted. |
Category name1 | Specify one of the category name/field name pairs to be displayed. For the field name, only options corresponding to the selected category name will be displayed. If the Display by difference checkbox is selected, information for cumulative values can be displayed incrementally. Refer to Section 4.2, "Drilled-Down/Report Information" in the Reference Guide for details on the category names and field names that can be specified. | |
Field name1 | ||
Display by difference | ||
Resource ID1 | Specify one of the resource IDs to be displayed. If nothing is specified, all resource IDs will be targeted. Point Resource IDs can be retrieved by right-truncating the resource ID according to a specified search string. Example: If the two resource IDs "AAA123" and "AAA456" exist, both can be targeted by specifying "AAA". | |
Data 2 specification | Host 2 | Select a host containing some of the data to be displayed from the drop-down list box. The list box displays the hosts that have been registered with the selected system group. When ALL_SERVER is selected, all hosts in the system group are targeted. |
Category name2 | Specify the other category name/field name to be displayed. For the field name, only options corresponding to the selected category name will be displayed. If the Display by difference checkbox is selected, information for cumulative values can be displayed incrementally. | |
Field name2 | ||
Display by difference | ||
Resource ID2 | Specify one of the resource IDs to be displayed. If nothing is specified, all resource IDs will be targeted. Point Resource IDs can be retrieved by right-truncating the resource ID according to a specified search string. | |
For regression analysis display only
Item | Description |
|---|---|
System Group | Select the system group to be analyzed from the drop-down list box. |
Host | Select the host to be analyzed from the drop-down list box. The list box displays the hosts that have been registered with the selected system group. When ALL_SERVER is selected, all hosts in the system group are analyzed. |
Category name | Specify the category name and field name to be analyzed. For the field name, only options corresponding to the selected category name will be displayed. |
Field name | |
Display by difference | If the Display by difference checkbox is selected, information for cumulative values can be displayed incrementally. Refer to Section 4.2, "Drilled-Down/Report Information" in the Reference Guide for details on the category names and field names that can be specified. |
Resource ID | Specify the resource ID to be analyzed. If nothing is specified, all resource IDs will be targeted. Point Resource IDs can be retrieved by right-truncating the resource ID according to a specified search string. Example: If the two resource IDs "AAA123" and "AAA456" exist, both can be targeted by specifying "AAA". |
For contour display only
Item | Description |
|---|---|
System Group | Select the system group to be analyzed from the drop-down list box. |
Host | Select the host to be analyzed from the drop-down list box. The list box displays the hosts that have been registered with the selected system group. When ALL_SERVER is selected, all hosts in the system group are analyzed. |
Category name | Specify the target category name and field name for the analysis. For the field name, only options corresponding to the selected category name will be displayed. If the Display by difference checkbox is selected, information for cumulative values can be displayed incrementally. Refer to Section 4.2, "Drilled-Down/Report Information" in the Reference Guide for details on the category names and field names that can be specified. |
Field name | |
Display by difference | |
Resource ID | Specify the resource ID to be targeted for analysis. If nothing is specified, all resource IDs will be targeted. Point Resource IDs can be retrieved by right-truncating the resource ID according to a specified search string. Example: For example, if the two resource IDs "AAA123" and "AAA456" exist, both can be targeted by specifying "AAA". |
For past/present time-series items only
Item | Description |
|---|---|
System Group | Select the system group to be analyzed from the drop-down list box. |
Host | Select the host to be analyzed from the drop-down list box. The list box displays the hosts that have been registered with the selected system group. When ALL_SERVER is selected, all hosts in the system group are analyzed. |
Category name | Specify the category name and field name to be analyzed for the report. For the field name, only options corresponding to the selected category name will be displayed. If the Display by difference checkbox is selected, information for cumulative values can be displayed incrementally. Refer to Section 4.2, Drilled-Down/Report Information" in the Reference Guide for details on the category names and field names that can be specified. |
Field name | |
Display by difference | |
Resource ID | Specify the resource ID to be analyzed. If nothing is specified, all resource IDs will be targeted. Point Resource IDs can be retrieved by right-truncating the resource ID according to a specified search string. Example: If the two resource IDs "AAA123" and "AAA456" exist, both can be targeted by specifying "AAA". |
Report base day | Specify the base day used for comparison in the analysis. |
For transition comparison settings only
Item | Description |
|---|---|
System Group | Select the system group to be analyzed from the drop-down list box. |
Host | Select the host to be analyzed from the drop-down list box. The list box displays the hosts that have been registered with the selected system group. When ALL_SERVER is selected, all hosts in the system group are analyzed. |
Category name | Specify the category name and field name to be analyzed for the report. For the field name, only options corresponding to the selected category name will be displayed. If the Display by difference checkbox is selected, information for cumulative values can be displayed incrementally. Refer to Section 4.2, "Drilled-Down/Report Information" in the Reference Guide for details on the category names and field names that can be specified. |
Field name | |
Display by difference | |
Resource ID | Specify the resource ID to be analyzed. If nothing is specified, all resource IDs will be targeted. Point Resource IDs can be retrieved by right-truncating the resource ID according to a specified search string. Example: If the two resource IDs "AAA123" and "AAA456" exist, both can be targeted by specifying "AAA". |
Analysis time slot | Specify the time period for which transition comparison is to be performed. The starting time and finishing time for the analysis can be specified. |
