ServerView Resource Coordinator VE Setup Guide

6.3.3 Changing Settings for the HBA Address Rename Setup Service

This section explains how to change settings for the HBA address rename setup service. Such settings include the admin server IP address, the port used to communicate with the admin server, and the IP address of the HBA address rename server.

6.3.3.1 Changing the IP Address of the Admin Server

This section explains how to change the IP address of the admin server.

When this setting is changed, the HBA address rename setup service automatically checks whether it can communicate with the new admin server IP address.
Changing this setting also requires changing the port on the admin server side beforehand.

Change the IP address of the admin server according to "6.3.1.1 Changing Admin IP Addresses", and change the admin IP address for the HBA address rename setup service according to step 12.

6.3.3.2 Changing the Port Number Used to Communicate with the Admin Server

This section explains how to change the port used between the HBA address rename setup service and the admin server.

The HBA address rename setup service used the "rcxweb" port to communicate with the admin server.
When this setting is changed, the HBA address rename setup service automatically checks whether it can communicate with the new admin server IP address.
Changing this setting also requires changing the port on the admin server side beforehand.

Use the following procedure to change the port numbers used to communicate with the admin server:

1. Change the port number of the manager.

   Change the "rcxweb" port number according to the instructions given in "6.3.1.2 Changing Port Numbers".

2. Change the port number of the HBA address rename setup service.

   Refer to "6.2.2.1 Settings for the HBA address rename setup service", and change the port to the same port number.

   
   

6.3.3.3 Changing the IP Address of the HBA Address Rename Server

This section explains how to change the IP address of the HBA address rename server.

Use the following procedure to change the IP address of the HBA address rename server.

1. Log in to the HBA address rename server with administrator authority.

2. Stop the HBA address rename setup service.

   Stop the HBA address rename setup service according to "6.2.2.1 Settings for the HBA address rename setup service".

3. Change the IP address set within the operating system.

   Change the IP address following the instructions given in the operating system's manual.

4. Restart the HBA address rename setup service.

   Restart the HBA address rename setup service according to "6.2.2.1 Settings for the HBA address rename setup service".