The file already exists. Do you want to overwrite it?
Explanation
The specified file name already exists. Continuing with the processing may overwrite existing file information.
System action
None
System administrator response
None
End-To-End list is empty.
Explanation
Processing was interrupted because the EndToEnd information needed for external output to the CSV file was not found.
System action
None
System administrator response
None
The web browser is not registered.
Explanation
The Web browser cannot be started because it has not been installed on the client. Install a Web browser and then perform the processing again.
System action
None
System administrator response
Install a Web browser so that it can run on the client.
Because the correlation management information is being edited, the administrative server cannot be accessed.
Explanation
Because the correlation management information stored in the file is opened and displayed, processing related to the administrative server access cannot be performed. Select [File] - [Create], and then execute the operation for accessing the administrative server.
System action
None
System administrator response
None
Cannot find the application to execute.
Explanation
It was not possible to execute the application which registered as management software because it was not found. Please confirm the registered information.
When the following information items are specified in the [Management software] item under Property, switch to the resource management window and execute the [Call management software] operation.
client: PWSVM
telnet://connected-server-name (or connected-server-IP-address)
System action
None
System administrator response
None
Because the account only has general user access authority, the connection operation to the application element is not permitted.
Explanation
Access Authority that is set in the account for the login has been registered as the general user.General user authority can not be allowed to operate the application. Contact the administrator and ask of Access Authority.
System action
None
System administrator response
None
This device cannot be dropped into the Correlation window.
Explanation
The device icon selected from the resource view and dragged to the correlation management window cannot be dropped. No switches and hubs can be dragged to the correlation management window.
System action
None
System administrator response
None
An application name must be entered.
Explanation
No application name was specified in the dialog box for application element registration. Specify an application name to resume the registration processing.
System action
None
System administrator response
None
An application with the same name has already been configured.
Explanation
The application name specified for registration already exists. Specify another application name to resume the registration processing.
System action
None
System administrator response
None
An application cannot be created on different device types.
Explanation
An application can be associated with multiple DBMSs (databases) or file systems but cannot be associated between different servers. Select an element within the server.
System action
None
System administrator response
None
Please select the application to delete.
Explanation
Select the application to be deleted.
System action
None
System administrator response
None
A device and an element are selected. Route search cannot be performed where a device and an element are specified.
Explanation
Because both the device and the element in the device have been selected, Route Search can not be executed. Select either the device or elements in the device, and execute Route Search.
System action
None
System administrator response
None
An access path and a device are selected. Route search cannot be performed where an access path and a device are specified.
Explanation
Because both of the AccessPath and the device have been selected, Route Search can not be executed. Select either the AccessPath or the device and execute Route Search.
System action
None
System administrator response
None
An access path and an element are selected. Route search cannot be performed where an access path and an element are specified.
Explanation
Because both of theAccessPath and the element have been selected, Route Search can not be executed. Select either the AccessPath or the element and execute Route Search.
System action
None
System administrator response
None
An access path and a device/element are selected. Route search cannot be performed where an access path and a device/element are specified.
Explanation
Because the AccessPath, unit and element have been selected, Route Search can not be executed. Select either the Accesspath or unit and element and execute Route Search.
System action
None
System administrator response
None
Please enter a percentage value (1-100%).
Explanation
Set it by the numerical value of 1-100 when setting the display magnification of the table element.
System action
None
System administrator response
None
Exception occurred.
Explanation
Unexpected exception has occurred. When the file was saved, it wasn't able to be saved. When the file was opened, it wasn't able to be opened.
System action
None
System administrator response
None
IOException occurred.
Explanation
IOException has occurred. When the file was saved, it wasn't able to be saved. When the file was opened, it wasn't able to be opened.
System action
None
System administrator response
Please confirm the authority of directory of the specified file.
The file does not exist.
Explanation
The file which started opening does not exist.
System action
None
System administrator response
None
File format is not supported.
Explanation
The file of the uncorrespondence format was saved or opened.
System action
None
System administrator response
Please select "*.gmz" or "*.gmf" file.
No enterprise code in the CorrelationObject:
Explanation
No enterprise code is set for the device object that was dragged and dropped.
System action
Does not display the device object that was dragged and dropped in the correlation management window.
System administrator response
The device object data created on the administrative server is invalid. Collect the data needed for troubleshooting and then contact your Fujitsu systems engineer (SE).
No converter type:
Explanation
ObjectConverter corresponding to the device object that was dragged and dropped is not found.
System action
Does not display the device object that was dragged and dropped in the correlation management window.
System administrator response
A file in the program may have been deleted. Collect the data needed for troubleshooting and then contact your Fujitsu systems engineer (SE).
Not a CorrelationObject:
Explanation
This application does not support the object corresponding to the device object that was dragged and dropped.
System action
Does not display the device object that was dragged and dropped in the correlation management window.
System administrator response
An internal error occurred in the program. Collect the data needed for troubleshooting and then contact your Fujitsu systems engineer (SE).
While converting the device object, an internal inconsistency occurred:
Explanation
An internal inconsistency occurred during conversion of the device object that was dragged and dropped.
System action
Does not display the device object that was dragged and dropped in the correlation management window.
System administrator response
An internal inconsistency occurred in the program. Collect the data needed for troubleshooting and then contact your Fujitsu systems engineer (SE).
Unsupported converter type:
Explanation
ObjectConverter corresponding to the device object that was dragged and dropped is not found.
System action
Does not display the device object that was dragged and dropped in the correlation management window.
System administrator response
A file in the program may have been deleted or this application may not support the device that was dragged and dropped. Collect the data needed for troubleshooting and then contact your Fujitsu systems engineer (SE).
Cannot load the converter object or cannot convert it:
Explanation
The object converter corresponding to the device object that was dragged and dropped could not be loaded into JavaVM, or the device object could not be converted.
System action
Does not display the device object that was dragged and dropped in the correlation management window.
System administrator response
An internal inconsistency occurred. Collect the data needed for troubleshooting and then contact your Fujitsu systems engineer (SE).
The Caution value must be smaller than the Warning value.
Explanation
The Caution value is larger than the Warning value. Revise the entered Warning and Caution values.
System action
None.
System administrator response
None.
Since there will be Thin Provisioning Pool with the Warning value smaller than the Caution value by the specified settings, the specified values cannot be set.
Explanation
If the entered Warning value is set, a Thin Provisioning Pool will have a Warning value that is smaller than the Caution value. Revise the entered Warning value. Enter a Warning value that is larger than the Caution value.
System action
None.
System administrator response
None.
Since there will be Thin Provisioning Pool with the Caution value bigger than the Warning value by the specified settings, the specified values cannot be set.
Explanation
If the entered Caution value is set, a Thin Provisioning Pool will have a Caution value that is larger than the Warning value. Revise the entered Caution value. Enter a Caution value that is smaller than the Warning value.
System action
None.
System administrator response
None.
Internal inconsistency occurred at the time of reading of a properties file or an actions.xml file.
Explanation
This message is output if the configuration file in the program cannot be read when the correlation management window is activated.
System action
Does not activate the correlation management window.
System administrator response
Program installation may have failed. Collect the data needed for troubleshooting and then contact your Fujitsu systems engineer (SE).
A main frame could not build.
Explanation
A program internal inconsistency occurred while the main frame of the correlation management window was being constructed.
System action
Does not activate the correlation management window.
System administrator response
Program installation may have failed. Collect the data needed for troubleshooting and then contact your Fujitsu systems engineer (SE).
Internal inconsistency occurred during plug-in initialization.
Explanation
An internal inconsistency occurred during the initialization of the plug-in that was required for activating the correlation management window.
System action
Does not activate the correlation management window.
System administrator response
Program installation may have failed, or the necessary plug-in file may have been deleted. Collect the data needed for troubleshooting and then contact your Fujitsu systems engineer (SE).
Internal inconsistency occurred during *.properties file reading of Plug-in.
Explanation
An internal inconsistency occurred while the *.properties file stored in the plug-in that is necessary for activating the correlation management window was being read.
System action
Does not activate the correlation management window.
System administrator response
Program installation may have failed. Collect the data needed for troubleshooting and then contact your Fujitsu systems engineer (SE).
Internal inconsistency occurred during initialization of a main frame (GUI framework).
Explanation
A program internal inconsistency occurred during initialization of the correlation management window.
System action
Does not activate the correlation management window.
System administrator response
Program installation may have failed. Collect the data needed for troubleshooting and then contact your Fujitsu systems engineer (SE).
Internal inconsistency occurred during construction of a main frame (GUI framework).
Explanation
A program internal inconsistency occurred during construction of the correlation management window.
System action
Does not activate the correlation management window.
System administrator response
Program installation may have failed. Collect the data needed for troubleshooting and then contact your Fujitsu systems engineer (SE).
Instance-ization of GUIComponent in Plug-in went wrong.
Explanation
The GUI component in the plug-in that was necessary for constructing the correlation management window could not be instantiated.
System action
Does not activate the correlation management window.
System administrator response
Program installation may have failed. Collect the data needed for troubleshooting and then contact your Fujitsu systems engineer (SE).
There is no GUIComponent currently written to actions.xml in Plug-in.
Explanation
The GUI component written in actions.xml that was necessary for constructing the correlation management window could not be loaded.
System action
Does not activate the correlation management window.
System administrator response
Program installation may have failed. Collect the data needed for troubleshooting and then contact your Fujitsu systems engineer (SE).
Group-ization of GUIComponent in Plug-in went wrong.
Explanation
The GUI components used in the correlation management window could not be grouped.
System action
Does not activate the correlation management window.
System administrator response
Program installation may have failed. Collect the data needed for troubleshooting and then contact your Fujitsu systems engineer (SE).
Construction of a menu bar went wrong.
Explanation
Construction of the menu bar in the correlation management window failed.
System action
Does not activate the correlation management window.
System administrator response
Program installation may have failed. Collect the data needed for troubleshooting and then contact your Fujitsu systems engineer (SE).
Arrangement of a menu bar went wrong.
Explanation
Arranging the menu bar in the correlation management window (in the main frame) failed.
System action
Does not activate the correlation management window.
System administrator response
Program installation may have failed. Collect the data needed for troubleshooting and then contact your Fujitsu systems engineer (SE).
The composition of a menu item went wrong.
Explanation
Constructing menu items (sequential arrangement) in the correlation management window failed.
System action
Does not activate the correlation management window.
System administrator response
Program installation may have failed. Collect the data needed for troubleshooting and then contact your Fujitsu systems engineer (SE).
Construction of the separator in a menu item went wrong.
Explanation
Constructing separators (lines) in the menu items of the correlation management window failed.
System action
Does not activate the correlation management window.
System administrator response
Program installation may have failed. Collect the data needed for troubleshooting and then contact your Fujitsu systems engineer (SE).
Construction of a tool bar went wrong.
Explanation
Constructing the toolbar in the correlation management window failed.
System action
Does not activate the correlation management window.
System administrator response
Program installation may have failed. Collect the data needed for troubleshooting and then contact your Fujitsu systems engineer (SE).
Internal inconsistency occurred all over actions.xml Parse.
Explanation
An internal inconsistency occurred during analysis of the actions.xml file that is needed to construct the correlation management window.
System action
Does not activate the correlation management window.
System administrator response
Program installation may have failed. Collect the data needed for troubleshooting and then contact your Fujitsu systems engineer (SE).
Construction of an actions.xml parser went wrong.
Explanation
Constructing the parser of the actions.xml file that is needed to construct the correlation management window failed.
System action
Does not activate the correlation management window.
System administrator response
Program installation may have failed. Collect the data needed for troubleshooting and then contact your Fujitsu systems engineer (SE).
Could not parse a actions.xml.
Explanation
Analyzing the actions.xml file that is needed to construct the correlation management window failed.
System action
Does not activate the correlation management window.
System administrator response
Program installation may have failed. Collect the data needed for troubleshooting and then contact your Fujitsu systems engineer (SE).
