The hardware listed below is required when using this software.
No | Operating server | Supported model |
---|---|---|
1 | Administrative server | Over 512MB memory and CPU is Pentium (R) III 1.2GHz or better |
The basic software listed below is required when using this software.
No. | Product name | Remarks |
---|---|---|
1 | Windows Server 2008 R2 Standard | This product runs as a 32bit application on the WOW64 (Windows 32-bit On Windows 64-bit) subsystem. |
2 | Windows Server 2008 R2 Enterprise | |
3 | Windows Server 2008 R2 Datacenter | |
4 | Windows Server 2008 Standard (32-bit)(64-bit) | |
5 | Windows Server 2008 Enterprise (32-bit)(64-bit) | |
6 | Windows Server 2008 Datacenter (32-bit)(64-bit) | |
7 | Windows Server 2008 Standard without Hyper-V (32-bit)(64-bit) | |
8 | Windows Server 2008 Enterprise without Hyper-V (32-bit)(64-bit) | |
9 | Windows Server 2008 Datacenter without Hyper-V (32-bit)(64-bit) | |
10 | Windows Server 2003 R2, Standard Edition | includes SP2 |
11 | Windows Server 2003 R2, Standard x64 Edition | |
12 | Windows Server 2003 R2, Enterprise Edition | |
13 | Windows Server 2003 R2, Enterprise x64 Edition | |
14 | Windows Server 2003, Standard Edition | includes SP1, SP2 |
15 | Windows Server 2003, Enterprise Edition | |
16 | Windows 2000 Server (SP1 or later version) | - |
17 | Windows 2000 Advanced Server (SP1 or later version) | - |
18 | Windows 2000 Professional (SP1 or later version) | - |
Note
The notation of Windows operating system products in this chapter:
When referring to products from No.1 to No.9 as a group, "Windows Server 2008" is indicated.
When referring to products from No.10 to No.15 as a group, "Windows Server 2003" is indicated.
Note that the same method of notation may also be used in other chapters to indicate a different product group.
In addition, the other products notation keeps the word of "Abbreviations" in the "Preface".
None.
This software cannot be used in combination with the following software.
No. | Product name | Version / Level | Remarks |
---|---|---|---|
1 | Systemwalker Resource Coordinator | All | Excluding Systemwalker Resource Coordinator Virtual server Edition |
2 | Systemwalker/StorageMGR | All | - |
3 | Softek Storage Cruiser | All | - |
4 | Softek SANView | All | - |
5 | ETERNUS SF Quick Starter | All | - |
6 | ETERNUS SF Express | All | - |
For new installations, the following static disk space is required.
No. | Directory | Required disk space | Remarks |
---|---|---|---|
1 | $INS_DIR (*1) | 300 | $INS_DIR means "Program Directory" specified at the Manager installation. |
2 | $ENV_DIR (*1) | 1 | $ENV_DIR means "Environment Directory" specified at the Manager installation. |
3 | $TMP_DIR (*1) | 2 | $TMP_DIR means "Work Directory" specified at the Manager installation. |
*1: The default directory is C:\Program Files\ETERNUS-SSC when the Windows operating system is installed in drive C.
Note
The all of above directories are needed to operate this software. Don't remove them, even if the Manager installation has been completed.
The required dynamic disk space is as below.
The following disk space is required for each directory, in addition to the static disk resources.
No. | Directory | Required disk space | Remarks |
---|---|---|---|
1 | $ENV_DIR(*1) | 5 + 1(*A) + 1.2(*B) | $ENV_DIR means "Environment Directory" specified at the Manager installation. *A: Configuration definition file -> Calculated assuming 100 products at a maximum |
2 | $TMP_DIR (*1) | 1055 + (*E) + 30(*C) + 20(*D) | $TMP_DIR means "Work Directory" specified at the Manager installation. *C: Log Calculated the space required for databases assuming 1000 servers and two devices for each (12KB * Number of registered servers + 4KB * Number of registered devices) |
*1: The default directory is C:\Program Files\ETERNUS-SSC when the Windows operating system is installed in drive C.
Note
The all of above directories are needed to operate this software. Don't remove them, even if the Manager installation has been completed.
Repository for Manager
For Manager, the following amount of memory is required, depending on the numbers of managed storage modes, switches, and storage units.
Amount of disk space (MB) = 1 + [Number of target units] * 4
Additionally, when performance management is being performed, based on the fibre channel switch used to collect the performance information, the type of target (the ETERNUS/GR series), the number of logical units involved, the number of DE (Disk Enclosure), and the number of days for which information is to be collected, the required capacity given below becomes necessary.
Information
The default number of days for collection is seven. The number of secured LUs (Logical Units) is the actual number of LUs the functions of which are secured in order to perform performance management for the ETERNUS/GR series. Performance management is secured in units of 64 LUN for the ETERNUS/GR series. Therefore, when instructed to secure from LUN 15 to 200, the information for the actual LUs 0 to 255 (256 in total) would be secured.
Device | Required disk space |
---|---|
ETERNUS8000 models 700, 900, 1100 and 2100 | The firmware version is previous V11L40: The firmware version is V11L40 or later: [*1] The "number of secured RAIDGroups" is the number of RAIDGroups created from the secured LUs. When monitoring the performance for the number of active disks: |
ETERNUS DX8400/DX8700 | (Number of days to collect + 1) * (24090 + (60 + 0.2 * number of DEs + 0.2 * number of secured LUs + 0.3 * number of secured RAIDGroups[*1]) * (86400 / performance monitoring interval (seconds)) + (79 * number of DEs) + (89 * number of secured LUs) + (103 * number of secured RAIDGroups[*1])) / 1024 [*1] The "number of secured RAIDGroups" is the number of RAIDGroups created from the secured LUs. When monitoring the performance for the number of active disks: |
ETERNUS6000 | (Number of days to collect + 1) * (9.85 + (0.06 + 13.43 / performance monitoring interval (seconds)) * number of secured LUs[*1] + 1956.45 / performance monitoring interval (seconds)) [*1] For ETERNUS6000, it is counted as a total number of LUs (Logical Unit) targeted for performance monitoring. |
ETERNUS4000 models 300 and 500 | The firmware version is previous V11L40: The firmware version is V11L40 or later: [*1] The "number of secured RAIDGroups" is the number of RAIDGroups created from the secured LUs. When monitoring the performance for the number of active disks: |
ETERNUS DX400 series | (Number of days to collect + 1) * (6837 + (17 + 0.2 * number of DEs + 0.2 * number of secured LUs + 0.3 * number of secured RAIDGroups[*1]) * (86400 / performance monitoring interval (seconds)) + (79 * number of DEs) + (89 * number of secured LUs) + (103 * number of secured RAIDGroups[*1])) / 1024 [*1] The "number of secured RAIDGroups" is the number of RAIDGroups created from the secured LUs. When monitoring the performance for the number of active disks: |
ETERNUS3000 (except models 80 and 100) | (Number of days to collect + 1) * ((0.06 + 11.61 / performance monitoring interval (seconds)) * number of secured LUs + 253.13 / Performance monitoring interval (seconds) + 1.29) |
ETERNUS3000 models 80 and 100 | (Number of days to collect + 1) * ((0.06 + 11.62 / performance monitoring interval (seconds)) * number of secured LUs + (38.73 / performance monitoring interval (seconds)) + 1.29) |
ETERNUS2000 | (Number of days to collect +1) * (140 + (0.7 + 0.2 * number of installed DEs + 0.3 * (number of secured LUs + number of secured RAIDGroups[*1])) * (86400 / performance monitoring interval (seconds)) + (60 * number of installed DEs) +(50 * (number of secured LUs + number of secured RAIDGroups[*1]))) / 1024 [*1] The "number of secured RAIDGroups" is the number of RAIDGroups created from the secured Lus. When monitoring the performance for the number of active disks: |
ETERNUS DX60/DX80/DX90 | (Number of days to collect + 1) * (240 + (1.2 + 0.3 * number of DEs + 0.3 * (number of secured LUs + number of secured RAIDGroups[*1])) * (86400 / performance monitoring interval (seconds)) + (95 * number of DEs) + (50 * (number of secured LUs + number of secured RAIDGroups[*1]))) / 1024 [*1] The "number of secured RAIDGroups" is the number of RAIDGroups created from the secured Lus. When monitoring the performance for the number of active disks, power consumption, and temperature: |
ETERNUS GR740/GR820/GR840 | (Number of days to collect + 1) * ((0.06 + 11.61 / performance monitoring interval (seconds)) * number of secured LUs + 341.95 / performance monitoring interval (seconds) + 1.67) |
ETERNUS GR720/GR730 | (Number of days to collect + 1) * ((0.06 + 11.62 / performance monitoring interval (seconds)) * number of secured LUs + 138.43 / performance monitoring interval (seconds) + 0.65) |
ETERNUS SN200 series Fibre Channel switch PRIMERGY Fibre Channel Switch Blade PRIMERGY Fibre Channel Switch Blade(4Gbps) Brocade Fibre Channel Switch | (Number of days to collect +1) * (30 / performance monitoring interval (seconds)) * 1.6 |
ETERNUS SN200 series Fibre Channel switch Brocade Fibre Channel Switch | (Number of days to collect +1) * (30 / performance monitoring interval (seconds)) * 3.2 |
ETERNUS SN200 series Fibre Channel switch Brocade Fibre Channel Switch | (Number of days to collect +1) * (30 / performance monitoring interval (seconds)) * 13 |
ETERNUS SN200 series Fibre Channel switch Brocade Fibre Channel Switch | (Number of days to collect +1) * (30 / performance monitoring interval (seconds)) * 26 |
ETERNUS SN200 series Fibre Channel switch Brocade Fibre Channel Switch | (Number of days to collect +1) * (30 / performance monitoring interval (seconds)) * 39 |
ETERNUS SN200 MDS series Fibre Channel switch | (Number of days to collect +1) * 0.1 * maximum number of slots supported by device[*1] * 128 * (30 / performance monitoring interval (seconds)) [*1] Use 1 as the maximum number of slots for MDS9120 |
Example
When securing the performance information of 512LUs on an ETERNUS3000 model 200, at 30 second intervals for 7 days,
8 * (30 / 30) * 375 * 512 / 1024 = 1500MB is required.
Additionally, when performance information is output using the performance information operation command, the following disk space is required, depending on the number of LUs of the ETERNUS series and Fibre Channel switches, number of DEs, number of ports that is used to collect performance information, and number of days of performance information output.
Each element (number of installed CM CPUs, number of installed DEs, installed CA Ports, installed CM Ports, LUs, RAIDGroups, and installed FC Ports) is the number mounted in the device when the command is executed.
Device | Required disk space |
---|---|
ETERNUS4000 models 300 and 500 | Number of days to output * (((0.3 + 0.4 * number of installed DEs + 0.1 * number of installed CA Ports + 0.2 * (number of LUs + number of RAIDGroups)) * (86400 / performance monitoring interval (seconds))) + (0.9 + 0.8 * number of installed DEs + 0.2 * number of installed CA Ports + 0.4 * (number of LUs + number of RAIDGroups) ) ) / 1024 |
ETERNUS DX400 series | Number of days to output * (((0.1 + 0.2 * number of installed DEs + 0.1 * number of installed CA Ports + 0.2 * (number of LUs + number of RAIDGroups) + 0.1 * number of installed CM CPUs) * (86400 / performance monitoring interval (seconds))) + (0.9 + 0.8 * number of installed DEs + 0.2 * number of installed CA Ports + 0.4 * (number of LUs + number of RAIDGroups) + 0.1 * number of installed CM CPUs) ) / 1024 |
ETERNUS2000 | Number of days to output * (((0.1 + 0.2 * number of installed DEs + 0.1 * number of installed CM Ports + 0.2 * (number of LUs + number of RAIDGroups)) * (86400 / performance monitoring interval (seconds))) + (0.2 + 0.3 * number of installed DEs + 0.2 * number of installed CM Ports + 0.4 * (number of LUs + number of RAIDGroups) ) ) / 1024 |
ETERNUS DX60/DX80/DX90 | Number of days to output * (((0.1 + 0.4 * number of installed DEs + 0.1 * number of installed CM Ports + 0.2 * (number of LUs + number of RAIDGroups)) * (86400 / performance monitoring interval (seconds))) + (0.2 + 0.6 * number of installed DEs + 0.2 * number of installed CM Ports + 0.4 * (number of LUs + number of RAIDGroups) ) ) / 1024 |
Fibre Channel Switch | Number of days to output * (0.1 + number of installed FC ports + (0.1 * number of installed FC ports)) + (0.1 + number of installed ports + (0.1 * number of installed FC ports * (86400 / performance monitoring interval (seconds))) / 1024 |
See
For the command, refer to "12.3.1.7 Performance information operation command (storageadm perfdata)" in the ETERNUS SF Storage Cruiser User's Guide.
The minimum memory required for operation of this software is indicated.
No. | Required memory (Unit : MB) | Remarks |
---|---|---|
1 | 200 | - |